Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 82 for “"Nucleation density"”.
-
Nucleation Dynamics for Water Condensation on Hydrophobic Surfaces in the Presence of Non-Condensable Gases
The density and rate of nucleation (here-in called nucleation density rate) significantly influences the heat transfer performance during dropwise condensation, as more than 70% of the total heat transfer happen for droplets smaller than 10 μm. Based on the classical nucleation theory, …
-
Nucleation Dynamics for Water Condensation on Hydrophobic Surfaces in the Presence of Non-Condensable Gases
The density and rate of nucleation (here-in called nucleation density rate) significantly influences the heat transfer performance during dropwise condensation, as more than 70% of the total heat transfer happen for droplets smaller than 10 μm. Based on the classical nucleation theory, …
-
An optimization of graphene growth by chemical vapor deposition
… is reduced by decreasing the amount of nucleation sites.It is shown that the system pressure and the gas flow ratios can be used to control the nucleation density of graphene. The background pressure was increased by the addition of an argon gas flow to the precursor gas mixture. The …
-
Atomic Force Microscopy and Image Analysis of Epitaxial 2D WS₂ Crystals Grown via Metal-Organic Chemical Vapor Deposition
… been employed to quantify monolayer coverage, nucleation density, and domain size. Our findings reveal that WS₂ monolayer coverage increases proportionally with the nucleation growth time, indicating a direct correlation between deposition duration and surface coverage. Additionally, we observe …
-
Controlling nucleation and growth of ultra-thin ruthenium films in chemical vapor deposition
… on metal nanoparticles, forces additional nucleation and enhances nucleation density. Island growth combined with a sparse nucleation density leads to film roughness and the deposition of more metal mass than is needed to form a film of sufficient thickness to function as a copper diffusion …
-
Chemical vapor deposition of diamond thin films on titanium silicon carbide
… 1980s. It has been well acknowledged that both nucleation and growth of diamond on non-diamond surfaces without pre-treatment are very difficult and slow. Furthermore, the weak adhesion between the diamond thin films and substrates has been a major problem for widespread application of diamond …
-
Effects of Crystallization Temperature and Film Thickness on Low-Density Polyethylene (LDPE) Crystallization
… thickness and crystallization temperature on low-density polyethylene (LDPE) crystallization was investigated in an isothermal crystallization process. LDPE films of different thicknesses were prepared by flowcoating and crystallized at TC, for 30 minutes. The morphologies of the spherulites after …
-
Adhesion Enhancement of Diamond Coating on WC-Co Substrates Through Interlayer Design
… of Co on graphite formation. Moreover, the low nucleation density and the high thermal stress in the coatings also result in poor adhesion. The introduction of interlayer is one of the available approaches to enhance the coating-substrate interfacial adhesion. The goal of this project is to …
-
An Investigation Of Ion Bombardment From Microwave Plasma Chemical Vapor Deposition During Bias Enhanced Nucleation Of Boron-Rich Materials
… bias current may be due to variation in plasma density as Ar flow changes between 0 sccm and 500 sccm. Us-ing these results, substrate bias pre-treatment experiments were performed at 10 torr in an Ar/H2 plasma, yielding the maximum bias current. Nucleation density of boron deposits were …
-
Investigation of Additives for Use in Electroless Plating Solutions for Fabrication of Nanowires
… plating environment can modify the barriers to nucleation (or seeding) and growth. Two additives, namely 3-mercapto-1-propanesulfonic Acid (MPS) and 1,3-propanedisulfonic acid (PDS), notably increased the selectivity of electroless metallization on chemically modified surfaces, which can be used …
-
Solid-state Polymer Nanofoams
… are initially investigated for enhancing cell nucleation and reducing cell size: varying intrinsic viscosity (or equivalently molecular weight) and varying glass transition temperature. Molecular weight and glass transition temperature are two of the most important parameters of polymers; …
-
Effect of Additives and Substrate Resistance on Shape Evolution During Electrodeposition: Nucleation, Growth and Trench Infill for Copper Interconnects
Cu nucleation and growth on resistive thin gold and ruthenium films was carried out in a electrochemical cell. A current pulse technique was found to produce a higher nucleation density that served to reduce the terminal effect and to result in more uniform deposit thickness and coalesce more rapid …
-
Effect of surface defects on the nucleation of CVD diamond on 6H silicon carbide
… the formation of this SiC layer precedes diamond nucleation. However, the nucleation of diamond on a clean, undamaged SiC surface is difficult.</p> <p>Some of the defects introduced by abrading the surface of many substrate materials with diamond powder before deposition appear to serve as …
-
I, Crystallization and morphological studies of ICI's intermediate temperature semicrystalline (ITX) polymer and, II, The influence of deformation (shear strain) during bond formation on adhesive bond strength
… Variations in the crystallization kinetics, nucleation density, and crystalline texture of ITX were observed as a function of melt history. Experimental evidence suggests that ITX, like several other rigid-chain high-performance semicrystalline materials, is melt sensitive in that its …
-
Altering the fiber-matrix interphase in semicrystalline polymer matrix composites
… were conducted. PVP dramatically reduced the nucleation density of spherulites and modified the lamellar organization in the spherulites (as evidenced by the occurrence of banding which is the twisting of lamella as they grow radially). Furthermore, in the presence of unsized fibers, the …
-
THE NEW IMAGE PROCESSING ALGORITHM FOR QUALITATIVE AND QUANTITATIVE STM DATA ANALYSIS
… by quantifying parameters like layer coverage, nucleation density, cluster area, and perimeter by area from an STM image. It uses an algorithm that filters noise using a custom made filter mask and then applies the OTSU segmentation technique to fit Gaussian curve on the image histogram for …
-
Enthalpy relaxation processes near the glass transition temperature of poly (ethylene terephthalate)
… This phenomenon is attributed to an increase in nucleation density. The excess amount of enthalpy and free volume quenched into the glassy systems decreased with sub-Tg annealing, thus bringing the system closer to equilibrium</p>
-
Quiescent isothermal and nonisothermal crystallization of isotactic polypropylene
… with very small time dependence (heterogeneous nucleation). Three empirical formulations with increasing degree of complexity were proposed to model the nucleation density as a function of temperature. Accordingly, the nucleation density was found to be inversely proportional to the degree of …
-
RHEED studies of vicinal Si(111) surfaces and Ag films grown on Si(111)
… is attributed to an increase in the island nucleation density;Vicinal silicon samples miscut from the (111) plane by 1.2°, 2.5°, and 4.5° towards the (211) direction were studied. If the samples were cooled slowly through the 1 x 1 to 7 x 7 phase transition a step bunching transformation …
-
Σύνθεση και μελέτη ιδιοτήτων νέων φουρανοϊκών πολυεστέρων
… are semicrystalline materials with high nucleation density, they are thermal stable and they produce a plenty of compounds by degradation. Increasing the number of carbon atoms, Tg decreases, while Tm follows the “even-odd number” effect. Finally, the tensile strength of POF, PNF, PDeF …
Page 1 of 5