Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"Numerical parametric study"”.
-
Numerical Parametric Study of the Thermomechanical Effect of Encapsulation on a Welded Beam Lead Component
… thesis, computational simulations are used to parametrically investigate the thermomechanical role played by the encapsulant when a beam-lead component is welded to slender copper busbars, encapsulated in a polymeric encapsulant, and subjected to temperature cycling. The parametric studies are …
-
Numerical Parametric Study of Wind-Driven Rain and Overhang Effectiveness on a Mid-Rise Building
… method, whether experimental, semi-empirical or numerical is to this day unsettled. Moreover, parametric study of the Wind-Driven Rain (WDR), and consequently its wetting building façades is rather insufficiently dealt with. Due to the destructive repercussions of moisture penetration induced by …
-
A Numerical Parametric Study on the Performance of a Low Profile dipole Planar Inverted Cone Antenna Placed over an Electromagnetic Bandgap Structure
Electromagnetic Band-gap (EBG) materials are a type of metamaterial with attractive properties not found in nature. EBG materials act as a high impedance surface over a specific frequency range, so they are a good candidate for replacing the conductive ground plane found in most low profile …
-
On the seismic behaviour and design of tunnels
… on a circular tunnel embedded in dry sand were numerically analyzed by means of full dynamic time history analysis. Additional analyses were conducted to investigate several crucial parameters on the response. The calibrated numerical models were then used for the validation of existing …
-
Effective Flange Width of Timber Composite Beams Using CLT Slabs
… and experimental results. A very detailed numerical model was developed for the timber composite beam that provided the foundation for further parametric investigations. The numerical parametric study is specifically concerned with the effect of wood plank and material properties of the CLT …
-
HIGH-STRENGTH CONCRETE AND FIBER-REINFORCED CEMENT COMPOSITES FOR POTENTIAL APPLICATION IN PROTECTIVE STRUCTURES
This study investigates the static and dynamic behaviors of high performance concretes for protective structures, and has three main parts. In the first part, attempts were made to obtain a better understanding of the critical parameters governing the compressive strength of high-strength concrete …
-
An Investigation of Interfacial Behaviour in Steel-Concrete Composite System by Cohesive Zone Method
… for mode mix is proposed and implemented. Numerical techniques to improve local numerical stability are incorporated. This study also identified key factors affecting epoxy aided shear bond performance between steel plate and fresh concrete. The interfacial bond behaviours are characterized …
-
Back Analysis of Mount Polley Tailing Dam Failure
… obtaining realistic shear-strength parameters. A numerical parametric study conducted to investigate potential ways of preventing failure of the perimeter embankment revealed downstream slope flattening to be the most effective solution.
-
A Finite Element and Experimental Study of Reinforced Concrete in Torsion
This thesis describes a study into the torsional behaviour of reinforced concrete members, in particular solid Lsections under pure torsion. It consists of three distinct but linked phases: (1) development, assessment and application of a three dimensional nonlinear finite element model for …
-
Dynamics and control of a flexible tethered system with offset
… as deployment and retrieval of the tether. A numerical parametric study of the highly nonlinear, nonautonomous and coupled equations of motion gives considerable insight into the system dynamics useful in its design. Of particular interest are the interactions involving orbital eccentricity, …
-
UHPFRC Strengthening of Reinforced Concrete Flexural Members Subjected to Static and Blast Loads
… in six journal articles. Papers 1 and 2 study the effects of UHPFRC jacketing on the static and blast behaviour of the singly-reinforced HSC beams in Series 1, while Paper 3 discusses the effects of additional parameters such as: the effect of retrofit type, roughening method and steel …
-
Slitted leading-edge proles for the reduction of broadband interaction noise
… than conventional leading edge geometries. A numerical and analytic investigation is performed into the mechanism and performance of its noise reduction. The far-field radiation is shown to be influenced by a system of induced vortices affecting the distribution of sources on the flat-plate …
-
Thermal performance enhancement of packaging substrates with integrated vapor chamber
… thermal performance of glass interposers through numerical and experimental approaches. Numerical parametric study on 2.5D interposers shows that as more copper structures are incorporated in glass interposers, the performance of silicon and glass interposers becomes closer, showing 31% difference …
-
Analysis of controlling parameters for shear behavior of rock joints with FLAC3D
… to simulate the in situ stress condition in numerical modeling, which is important for safe and economical design of various engineering constructions. These concerns require accurate quantification of shear strength of unfilled and in-filled joints, proper understanding of the basic …
-
Assessment of prestressed reinforced concrete box girder bridges under blast loads
… of this research is to develop analytical and numerical models to predict the damage level in a concrete deck under blast loading and the corresponding dynamic response of the damaged bridge system. The numerical analysis starts from the verification of blast pressure in the free air using …
-
Behavior of drilled shaft footings under pure compression loading and proposal of 3D strut-and-tie method
… different details from current practice. In this study, comprehensive shear-critical loading tests of pile cap specimens were carried out with a variety of parameters-strut inclination, shaft size, face reinforcement ratio, and depth of pile caps. A series of large-scale specimens which are …
-
Experimental and Computational Investigation of the Performance of the Braced Ductile Shear Panel
… its geometry by means of a reduced model, and a numerical parametric study. To validate the results of the computational study, an experimental program is conducted on a half-scale steel frame braced with a BDSP. Ten shear panel specimens with varying geometry are tested under quasi-static cyclic …
-
Shear Distribution in Prestressed Concrete Girder Bridges
… behavior, field testing of bridges, and a numerical parametric study. Results from the components were integrated to develop recommendations for rating prestressed concrete girder bridges. Laboratory bridge inelastic testing indicated shear force redistribution after cracking and before …
-
Reduced-order modelling of electrohydrodynamic flows on a circular cylinder
… is absent. For a rotating inner electrode, a numerical parametric study reveals four distinct behaviors: steady, periodic, transient, and outer contact (in which the film touches the outer electrode in a finite time). Linear stability and multiple-timescale analyses are performed and reveal …
-
Behaviour of Short and Slender CFRP Confined Concrete Columns with Innovative Laminate Systems Under Axial Loading
… the project a series of tests were conducted to study the performance of circular concrete columns wrapped with innovative carbon fiber reinforced polymer (CFRP) laminate systems having varying fiber orientations and stacking sequences. The experimental testing program included tests on FRP …
Page 1 of 2