Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1039 for “"Nylon"”.

  1. The neutral hydrolysis of nylon 66 and nylon 6

    <p>Nylon 66 and nylon 6 were hydrolyzed under neutral conditions in superheated water and under acid conditions in different concentrations of acid. These hydrolyses were carried out in order to determine if neutral hydrolysis is a feasible process for the reclamation of nylon 66 and nylon 6. The …

    ut-knoxville Repository record for The neutral hydrolysis of nylon 66 and nylon 6 (opens in a new tab)

  2. Cellulose fiber reinforced nylon 6 or nylon 66 composites

    … temperature engineering thermoplastics, such as nylon 6 and nylon 66. The continuous extrusion - direct compression molding processing and extrusion-injection molding were chosen to make cellulose fiber/nylon 6 or 66 composites. Tensile, flexural and Izod impact tests were used to demonstrate the …

    gatech Repository record for Cellulose fiber reinforced nylon 6 or nylon 66 composites (opens in a new tab)

  3. Nylon-6/Agricultural Filler Composites

    … melting point engineering thermoplastics like Nylon-6 with plant natural fibers and fillers. Low temperature processing methods, fiber modification or addition of additives which drops polymer melting point are some of proposed solutions for this problem. The objective of this thesis was to …

    waterloo Repository record for Nylon-6/Agricultural Filler Composites (opens in a new tab)

  4. The melt spinning of nylon-66

    … on the structure development and properties of nylon-66. Experiments were carried out using samples of nylon-66 polymer supplied by the Monsanto Company. The number average molecular weight of this polymer was determined to be 17,500.</p><p>The shear viscosity of nylon-66 melt was determined …

    ut-knoxville Repository record for The melt spinning of nylon-66 (opens in a new tab)

  5. Photolysis and photooxidation of Nylon 66

    … elucidating the UV degradation mechanism(s) of Nylon 66 by using various analytical methods, but until this study, mass spectrometry had not been used as an investigative technique. Nylon 66 films (with and without stabilizing additives), fibers, and nonwoven fabrics were photolyzed (at λ≤300 …

    utk-theses Repository record for Photolysis and photooxidation of Nylon 66 (opens in a new tab)

  6. FLAMMABILITY PROPERTIES OF CLAY-NYLON NANOCOMPOSITES

    … also) are measured. Samples consisting of pure Nylon 6 and Nylon with nano-clay additives up to 5 % are used in the study. In addition, the effect of thickness is considered for 1 to 24 mm. Data obtained over a range of radiant heat flux are analyzed to illustrate the effect of clay loading and …

    maryland Repository record for FLAMMABILITY PROPERTIES OF CLAY-NYLON NANOCOMPOSITES (opens in a new tab)

  7. Mathematical Modeling of Nylon 6/6,6 Copolymerization

    … adipic acid (ADA) in a batch reactor to produce nylon 6/6,6 copolymer. The reaction mechanism includes hydrolysis of caprolactam and cyclic dimer, polycondensation, polyaddition, transamidation, and ring formation via end biting and back biting. The catalytic effect of carboxyl end groups on …

    queens Repository record for Mathematical Modeling of Nylon 6/6,6 Copolymerization (opens in a new tab)

  8. Design of nylon-carbon fiber composite gears

    … Gear Manufacturers Association (AGMA) to a nylon-carbon composite material for the purpose of additive manufacturing (AM). Calculations for load carrying capacity and operating temperature are used to optimize a design that was previously constrained by conventional manufacturing technology. …

    utc Repository record for Design of nylon-carbon fiber composite gears (opens in a new tab)

  9. Continuous interfacial polycondensation of nylon 6-6

    <p>Nylon 6-6 has been prepared by continuous interfacial polycondensation from hexamethylene diamine and adipyl chloride in a stirred system. The effect of monomer concentration and stirring on the intrinsic viscosity of polyamide 6-6 solution in formic acid (90%) was determined.</p><p>As stirring …

    njit Repository record for Continuous interfacial polycondensation of nylon 6-6 (opens in a new tab)

  10. Continuous interfacial polycondensation of nylon 6-10

    <p>Nylon 6-10 has been prepared by continuous interfacial polycondensation hexamethylenedlamine and sebacoyl chloride in a stirred system. The effect of monomer concentration and stirring on the intrinsic viscosity of the polyamide 6-10 solution in m-cresol was measured.</p><p>As stirring (RPM) and …

    njit Repository record for Continuous interfacial polycondensation of nylon 6-10 (opens in a new tab)

  11. Some Sorption Studies on Nylon and Wool

    … as sorbents included drawn, undrawn and powdered nylon, and untreated, acid treated, dyed and, deaminated wool, respectively. Sorption from aqueous solution The methods used for the study of sorption from aqueous solution are those commonly employed, with the difference that in this work, the …

    glasgow Download PDF for Some Sorption Studies on Nylon and Wool (opens in a new tab)

  12. Fracture Mechanics of High Performance Nylon Fibers

    … of the strength limitations of high performance nylon 6,6 fibers. Specifically, linear elastic fracture mechanics (LEFM) techniques are employed in addition to elastic-plastic fracture mechanics (EPFM) theories to achieve this. We assume that a minute semi-elliptical flaw of an unknown size …

    gatech Repository record for Fracture Mechanics of High Performance Nylon Fibers (opens in a new tab)

Page 1 of 52