Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 181 for “"Nylon 6"”.

  1. Nylon-6/Agricultural Filler Composites

    … melting point engineering thermoplastics like Nylon-6 with plant natural fibers and fillers. Low temperature processing methods, fiber modification or addition of additives which drops polymer melting point are some of proposed solutions for this problem. The objective of this thesis was to …

    waterloo Repository record for Nylon-6/Agricultural Filler Composites (opens in a new tab)

  2. Mathematical Modeling of Nylon 6/6,6 Copolymerization

    … adipic acid (ADA) in a batch reactor to produce nylon 6/6,6 copolymer. The reaction mechanism includes hydrolysis of caprolactam and cyclic dimer, polycondensation, polyaddition, transamidation, and ring formation via end biting and back biting. The catalytic effect of carboxyl end groups on …

    queens Repository record for Mathematical Modeling of Nylon 6/6,6 Copolymerization (opens in a new tab)

  3. Continuous interfacial polycondensation of nylon 6-6

    <p>Nylon 6-6 has been prepared by continuous interfacial polycondensation from hexamethylene diamine and adipyl chloride in a stirred system. The effect of monomer concentration and stirring on the intrinsic viscosity of polyamide 6-6 solution in formic acid (90%) was determined.</p><p>As stirring …

    njit Repository record for Continuous interfacial polycondensation of nylon 6-6 (opens in a new tab)

  4. Continuous interfacial polycondensation of nylon 6-10

    <p>Nylon 6-10 has been prepared by continuous interfacial polycondensation hexamethylenedlamine and sebacoyl chloride in a stirred system. The effect of monomer concentration and stirring on the intrinsic viscosity of the polyamide 6-10 solution in m-cresol was measured.</p><p>As stirring (RPM) and …

    njit Repository record for Continuous interfacial polycondensation of nylon 6-10 (opens in a new tab)

  5. Structure development in fiber formation of nylon-6

    … of structure development in fiber formation from nylon-6 was performed. A major emphasis of the research involved on-line birefringenece measurements and studies of the development of orientation and crystallinity. The effects of annealing fibers in air, water and a 20 percent aqueous solution of …

    ut-knoxville Repository record for Structure development in fiber formation of nylon-6 (opens in a new tab)

  6. Multiscale Modeling of an Industrial Nylon-6 Leacher

    … presents a multiscale model of an industrial nylon-6 leacher. We develop several models at various spatial scales and implement them together in a simplistic, efficient way to develop an overall leacher model. We solve dynamic transport differential equations using the finite-volume method and …

    vt Repository record for Multiscale Modeling of an Industrial Nylon-6 Leacher (opens in a new tab)

  7. Flame retardant nylon 6 nanocomposite fibers : processing and characterization

    … that has significant commercial application is nylon. However, flammability and melt dripping is a major problem for polymers like nylon 6 because it can cause fire to spread to other flammable objects and escalate the fire in a short amount of time. Although high performance inherently …

    texas Repository record for Flame retardant nylon 6 nanocomposite fibers : processing and characterization (opens in a new tab)

  8. The neutral hydrolysis of nylon 66 and nylon 6

    <p>Nylon 66 and nylon 6 were hydrolyzed under neutral conditions in superheated water and under acid conditions in different concentrations of acid. These hydrolyses were carried out in order to determine if neutral hydrolysis is a feasible process for the reclamation of nylon 66 and nylon 6. The …

    ut-knoxville Repository record for The neutral hydrolysis of nylon 66 and nylon 6 (opens in a new tab)

  9. Study of the conductivity of Nylon 6/ABS blends.

    … of acrylonitrile butadiene styrene (ABS)/Nylon 6 blend with carbon black as conductive filler. Three different blends of ABS/carbon black, Nylon 6/carbon black and ABS/Nylon 6/carbon black with various compositions were prepared by mixing together by using a single screw extruder. Each …

    sheffield-hallam Download PDF for Study of the conductivity of Nylon 6/ABS blends. (opens in a new tab)

  10. Preparation and mechanical properties of nylon 6-graphene nanocomposites

    … like stiffness, strength and toughness. Nylon 6, graphene based nanoparticles like graphene nanoplatelets (GnP) and graphene oxide (GO), toughening agent like thermoplastic elastomer and compatibilizer were used for the preparation of nanocomposites. An important objective of this work …

    qu-belfast Repository record for Preparation and mechanical properties of nylon 6-graphene nanocomposites (opens in a new tab) Download PDF for Preparation and mechanical properties of nylon 6-graphene nanocomposites (opens in a new tab)

  11. Cellulose fiber reinforced nylon 6 or nylon 66 composites

    … temperature engineering thermoplastics, such as nylon 6 and nylon 66. The continuous extrusion - direct compression molding processing and extrusion-injection molding were chosen to make cellulose fiber/nylon 6 or 66 composites. Tensile, flexural and Izod impact tests were used to demonstrate the …

    gatech Repository record for Cellulose fiber reinforced nylon 6 or nylon 66 composites (opens in a new tab)

  12. Mechanical properties of glass fiber reinforced, rubber toughened nylon 6

    … of glass fiber reinforced, rubber toughened nylon 6 are presented with attention given to the tradeoff between stiffness/strength and toughness. Proper addition of maleated ethylene-propylene rubber (EPR-g-MA) or maleated styrene-hydrogenated butadiene-styrene triblock copolymers (SEBS-g-MA) …

    texas Repository record for Mechanical properties of glass fiber reinforced, rubber toughened nylon 6 (opens in a new tab)

  13. Fundamental Studies of In-situ Polymerization of Nylon-6 Nanocomposite

    … as early as the 1960’s. In more recent times nylon 6-montmorillonite clay nanocomposite have their origin in the pioneering research conducted at Toyota Central Research Laboratories where these two divergent organic and minerals were successfully integrated. To understand the fundamental …

    texas-state Repository record for Fundamental Studies of In-situ Polymerization of Nylon-6 Nanocomposite (opens in a new tab)

  14. Molecular dynamics simulation of ODTMA-Montmorillonite and nylon 6 nanocomposites

    … are inverse ratio to the T/O proportion. In nylon6 polymer nanocomposites, sodium cations which exist originally in ensemble as charge balancer are absorbed much closer to MMT surface than the organic components in the nylon 6 ODTMA-MMT ensemble. Sodium atoms or nitrogen atoms in surfactants …

    unsw Repository record for Molecular dynamics simulation of ODTMA-Montmorillonite and nylon 6 nanocomposites (opens in a new tab)

  15. Rheology, Dynamics and Structure Development During Melt Spinning of Nylon-6

    … spinning dynamics and structure development of nylon-6 was performed. The major emphasis of the research consisted of on-line rheological and morphological measurements. These included diameter, temperature and tension measurements of the fiber as well as x-ray diffraction and birefringence …

    utk-theses Repository record for Rheology, Dynamics and Structure Development During Melt Spinning of Nylon-6 (opens in a new tab)

Page 1 of 10