Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 46 for “"Nylon 66"”.

  1. The melt spinning of nylon-66

    … on the structure development and properties of nylon-66. Experiments were carried out using samples of nylon-66 polymer supplied by the Monsanto Company. The number average molecular weight of this polymer was determined to be 17,500.</p><p>The shear viscosity of nylon-66 melt was determined …

    ut-knoxville Repository record for The melt spinning of nylon-66 (opens in a new tab)

  2. Photolysis and photooxidation of Nylon 66

    … elucidating the UV degradation mechanism(s) of Nylon 66 by using various analytical methods, but until this study, mass spectrometry had not been used as an investigative technique. Nylon 66 films (with and without stabilizing additives), fibers, and nonwoven fabrics were photolyzed (at λ≤300 …

    utk-theses Repository record for Photolysis and photooxidation of Nylon 66 (opens in a new tab)

  3. Rubber toughening of glass-fiber -reinforced nylon 66

    … of a post industrial glass-fiber-reinforced nylon 66 which was separated from other polymers. A virgin glass-fiber-reinforced nylon 66 was also used in order to compare its properties with those of the recycled ones.;Rubbers used in this study were Styrene-Ethylene-Butylene-Styrene and …

    wvu Repository record for Rubber toughening of glass-fiber -reinforced nylon 66 (opens in a new tab)

  4. The action of polar adsorbates on nylon 66

    … perchlorate and magnesium perchlorate with nylon 66. (2) The study of changes in sorption of water, when polyamide (nylon 66) and polypeptide (silk) fibres are subjected to a tensile deformation. The effect of polar reagents on the dimensions and tensile characteristics suggests a …

    glasgow Download PDF for The action of polar adsorbates on nylon 66 (opens in a new tab)

  5. Thermal anisotropy and conductivity studies of nylon 66

    Massive nylon lends itself to many applications because of its outstanding toughness, abrasion-resistance, and chemical resistance. These properties make it a satisfactory bearing material, and in some applications it is superior to metallic bearings. However, the disadvantages of low melting point …

    vt Repository record for Thermal anisotropy and conductivity studies of nylon 66 (opens in a new tab)

  6. The neutral hydrolysis of nylon 66 and nylon 6

    <p>Nylon 66 and nylon 6 were hydrolyzed under neutral conditions in superheated water and under acid conditions in different concentrations of acid. These hydrolyses were carried out in order to determine if neutral hydrolysis is a feasible process for the reclamation of nylon 66 and nylon 6. The …

    ut-knoxville Repository record for The neutral hydrolysis of nylon 66 and nylon 6 (opens in a new tab)

  7. Cellulose fiber reinforced nylon 6 or nylon 66 composites

    … temperature engineering thermoplastics, such as nylon 6 and nylon 66. The continuous extrusion - direct compression molding processing and extrusion-injection molding were chosen to make cellulose fiber/nylon 6 or 66 composites. Tensile, flexural and Izod impact tests were used to demonstrate the …

    gatech Repository record for Cellulose fiber reinforced nylon 6 or nylon 66 composites (opens in a new tab)

  8. The high speed melt spinning of nylon-66 and its mathematical modelling

    … molecular weight and different polydispersity nylon-66 materials at the spinning speed from 1700 to 6300 meters per minute and mass throughput of 2.3-3.3 g/min. The molecular weight was in the range of 13,000-15,600.</p> <p>A mathematical model developed by Zieminski [14] was used and …

    ut-knoxville Repository record for The high speed melt spinning of nylon-66 and its mathematical modelling (opens in a new tab)

  9. Influence of the Interphase on the Mechanical Properties of Nylon 66 Composites

    … of glass fiber and carbon fiber reinforced nylon 66 were investigated using both microscopic and macroscopic testing techniques. The objective was to determine how different interphase morphologies affect the adhesion and properties such as damping, ultimate stress and strain, and modulus of …

    vt Repository record for Influence of the Interphase on the Mechanical Properties of Nylon 66 Composites (opens in a new tab)

  10. The influence of degree of crystallinity on the thermal conductivity of nylon 66

    The use of massive nylon as a material for bearing liners is limited by its low melting point ( 260 °C) and its low thermal conductivity (0.172 Btu per hour - square foot - °F per foot). This combination of defects results in the formation of hot spots at points of stress., and since the material …

    vt Repository record for The influence of degree of crystallinity on the thermal conductivity of nylon 66 (opens in a new tab)

  11. Measurement of elongational rheology of polymer melts using semi-hyperbolically convergent dies

    … polyethylene (HDPE), fourteen samples of blended nylon-66, and eleven samples of solid-state polymerized nylon-66 are characterized at processing temperatures and strain rates using the mentioned technique. The effect of molecular parameters such as molecular weight, molecular weight distribution, …

    utk-theses Repository record for Measurement of elongational rheology of polymer melts using semi-hyperbolically convergent dies (opens in a new tab)

  12. The solution fabrication and wet spinning of polyamides

    … were measured. The materials studied were Nylon-6, Nylon-66, and redissolved DuPont Nomex and Kevlar. The spinning conditions were varied over a range of dope concentrations, coagulation bath concentrations, and temperatures. The effects of polymer solvent on spinnability were also …

    ut-knoxville Repository record for The solution fabrication and wet spinning of polyamides (opens in a new tab)

  13. Stress relaxation in filamentous materials : The effect of humidity, temperature and strain on man-made fibres and silk

    … strained filaments of Terylene, Perlon, Grilon, nylon 66, nylon 610, polyethylene, polypropylene and silk has been studied at strains up to 4% extension, at constant relative humidity of 65% and with humidity fluctuating between 35% and 90% r.h., and at constant humidity with the temperature …

    glasgow Download PDF for Stress relaxation in filamentous materials : The effect of humidity, temperature and strain on man-made fibres and silk (opens in a new tab)

  14. Effects of polymer-organoclay interactions and processing methods on nanocomposite structure and properties

    … dispersion and mechanical property enhancement; nylon 6 nanocomposites show superior clay dispersion and matrix reinforcement than nylon 66 nanocomposites. The affinity of nylon 6 for the organoclay appears to be greater than that of nylon 66, which must be related to some aspect of their …

    texas Repository record for Effects of polymer-organoclay interactions and processing methods on nanocomposite structure and properties (opens in a new tab)

Page 1 of 3