Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 96 for “"O2 plasma"”.

  1. Einfluss negativer Ionen auf Driftwellen in einem Ar/O2-Plasma geringer Dichte

    … in einem Argon-Sauerstoff (Ar/O2)-Mischplasma geringer Dichte ($n_e = 4 · 10^{14}$\,m$^{−3}$) bei hohem Magnetfeld ($B = 0.5$\,T) untersucht. Die vom Druckgradienten der Elektronen angetriebenen Driftwellen sind sowohl in elektro-positiven Argon-Plasmen als auch in reaktiven, …

    cau-kiel Repository record for Einfluss negativer Ionen auf Driftwellen in einem Ar/O2-Plasma geringer Dichte (opens in a new tab)

  2. Experimental investigation of SF6–O2 plasma for the advancement of the anisotropic Si etch process

    … and the operating pressure in an SF6–O2 plasma in two capacitively coupled plasma etch chambers with different geometries. Silicon wafers were used to investigate the anisotropic nature of the etch profiles. The oxygen and fluorine concentrations were measured via optical emission …

    dcu Download PDF for Experimental investigation of SF6–O2 plasma for the advancement of the anisotropic Si etch process (opens in a new tab)

  3. STUDIES OF PLASMA-ENHANCED ATOMIC LAYER DEPOSITION USING A QUARTZ CRYSTAL MICROBALANCE

    … a custom-built viscous flow reactor to study plasma-enhanced atomic layer deposition (PEALD) of ZrO2 and SiO2 films.A thermal ALD process with tetrakis(ethylmethylamido)zirconium(IV) (TEMAZ) and water was first studied, and yielded a growth rate of 1.1 Å/cycle. A PEALD process with TEMAZ and …

    cornell Repository record for STUDIES OF PLASMA-ENHANCED ATOMIC LAYER DEPOSITION USING A QUARTZ CRYSTAL MICROBALANCE (opens in a new tab)

  4. Optimierung der Verbundfestigkeit zwischen PEEK-Werkstoffen und Verblendkompositen durch Niederdruckplasmaprozesse

    … einer Behandlung mit einem Niederdruckplasma auf die Scherhaftfestigkeit (SBS) zwischen Verblendkompositen und PEEK Werkstoffen zu untersuchen. Material und Methoden: 434 Proben wurden aus drei PEEK-Varianten (Juvora Dental Disk (Invibio Ltd., Lancashire, UK), DC 4420 und DC 4450 (beide …

    fu-berlin Repository record for Optimierung der Verbundfestigkeit zwischen PEEK-Werkstoffen und Verblendkompositen durch Niederdruckplasmaprozesse (opens in a new tab)

  5. Modelling of low-pressure discharges for plasma processing

    Low-pressure high density plasma processes are indispensable today for the microelectronic manufacturing industry. Classic plasma global models have been important tools for studying the properties of low pressure plasmas due to their highly computational efficiency and large chemical reaction …

    dcu Download PDF for Modelling of low-pressure discharges for plasma processing (opens in a new tab)

  6. Plasma-assisted atomic layer deposition of Al2O3 studied by infrared transmission spectroscopy

    … than H2O are researched. In precious work the plasma-assisted ALD process of Al2O3 employing Al(CH3)3 (TMA, trimethylaluminum) and an O2 plasma was investigated. In particular gas phase reaction products of the Al(CH3)3 exposure and O2 plasma properties were studied, thereby leaving the exact …

    eindhoven Repository record for Plasma-assisted atomic layer deposition of Al2O3 studied by infrared transmission spectroscopy (opens in a new tab) Download PDF for Plasma-assisted atomic layer deposition of Al2O3 studied by infrared transmission spectroscopy (opens in a new tab)

  7. Micromachining for high density neural electrode arrays: a process development for dry etching polydimethylsiloxane and it’s in vitro electro-chemical behaviour and biological response

    … using sulphur hexafluoride (SF6) and oxygen (O2) plasma to pattern microstructures in medical grade polydimethylsiloxane (PDMS), to allow the transfer of current between the Pt conductor and neural tissue. The process was optimised by investigating the effects of varying the process parameters …

    unsw Repository record for Micromachining for high density neural electrode arrays: a process development for dry etching polydimethylsiloxane and it’s in vitro electro-chemical behaviour and biological response (opens in a new tab)

  8. Tailoring wettability change on aligned and patterned carbon nanotube films for selective assembly

    … the large proportions of air trapping. By using O2 plasma etching, the surface wettability of ACNTs can be tuned from super-hydrophobic to hydrophobic, and then to hydrophilic by adjusting the flow rate of O2 gas during the etching process. Moreover, it was found that the surface wettability …

    nus Repository record for Tailoring wettability change on aligned and patterned carbon nanotube films for selective assembly (opens in a new tab) Download file for Tailoring wettability change on aligned and patterned carbon nanotube films for selective assembly (opens in a new tab)

  9. Experimental investigation of a low pressure capacitively-coupled discharge

    … thesis, a low-pressure, capacitively-coupled plasma (CCP) was investigated using the well established techniques of actinometry, two-photon laser-induced fluorescence (TALIF), appearance potential mass spectrometry (APMS), Langmuir and hairpin probes. The behaviour of atomic oxygen density in …

    dcu Download PDF for Experimental investigation of a low pressure capacitively-coupled discharge (opens in a new tab)

  10. Plasma Interactions on Organosilicate Glass Dielectric Films and Emerging Amorphous Materials- Approach to Pore Sealing and Chemical Modifications

    … The studies indicate that reaction with O2 in presence of VUV photons (~123 nm) result in significant carbon abstraction within the bulk and that the kinetics of this process is diffusion-limited. In contrast, OSG exposed to atomic O (no VUV) results in Si-C bond scission and Si-O bond …

    unt Repository record for Plasma Interactions on Organosilicate Glass Dielectric Films and Emerging Amorphous Materials- Approach to Pore Sealing and Chemical Modifications (opens in a new tab)

  11. Area selective atomic layer deposition of silicon dioxide on silicon dioxide using surface passivation of copper non-growth surface

    … selective atomic layer deposition process of SiO2 on SiO2, using alkanethiol and fluorothiol inhibitors in a three-step process on chemically mechanically planarized (CMP) Cu non-growth surface. In the first part of the study, we analyzed the passivation efficiency of heptane thiol (HT) …

    colo-mines Repository record for Area selective atomic layer deposition of silicon dioxide on silicon dioxide using surface passivation of copper non-growth surface (opens in a new tab)

  12. Metal contacts to P-type gallium nitride

    AQ, Cl2/N2 plasma and O2 plasma treatments on the Ni/Au (20/20 nm) contact to p-GaN are found to result in similar I-V characteristics, attributed to the similar Ga/N and O/Ga ratios obtained. O2 annealing was observed to be better than N2 annealing only for AQ surface treatment due to formation of …

    nus Repository record for Metal contacts to P-type gallium nitride (opens in a new tab) Download file for Metal contacts to P-type gallium nitride (opens in a new tab)

  13. Plasma nanocoatings on cobalt chromium L605 alloy for cardiovascular stent applications

    … coupons were coated with Trimethysilane (TMS) plasma nanocoatings of 20-25 nm in thickness. Direct current (DC) glow discharges were utilized for TMS plasma coatings and additional NH3/O2 plasma surface modification. Effects of plasma nanocoatings on CoCr L605 alloy surfaces were studied in …

    missouri Repository record for Plasma nanocoatings on cobalt chromium L605 alloy for cardiovascular stent applications (opens in a new tab)

  14. Interactions between plasma and material surfaces for sterilization and impurity adsorption

    … have limitations that could be overcome using plasma techniques. The unique characteristics of plasma make it a promising alternative for energy-intensive processes. This work investigated the characteristics of plasma that have the greatest impact on sterilization and the reactivation of …

    msu Repository record for Interactions between plasma and material surfaces for sterilization and impurity adsorption (opens in a new tab)

  15. Modificação superficial de filmes de poliéster usando plasma a baixa temperatura

    … techniques to increase the superficial tension, plasma as energy source is the more promising technique, because of their versatility and for not polluting the environment. The plasma surface polymeric modification has been used for many researchers, because it does not affect the environment …

    brazil-ufrn Repository record for Modificação superficial de filmes de poliéster usando plasma a baixa temperatura (opens in a new tab)

  16. Controlled deposition of gold nanoparticles on polystyrene

    … with poly-l-lysine (PLL). For the silanisation, O2 plasma, UV/O3 treatment and (base) piranha wash were tested as oxidising pre-treatments. For coating with PLL, O2 plasma was tested as pre-treatment for increased surface wettability. AuNP deposition for the different functionalisation methods is …

    chalmers Repository record for Controlled deposition of gold nanoparticles on polystyrene (opens in a new tab)

  17. Study on etching and characterization of advanced gate stack

    … stacks that can be used to replace poly Si and SiO2. Notched gate fabrication and device performance was studied using a gate stack consisting of poly Si on SiGe with different Ge concentration. A process to fabricate sub-50 nm poly Si gate length was developed using a technique similar to that of …

    nus Repository record for Study on etching and characterization of advanced gate stack (opens in a new tab) Download file for Study on etching and characterization of advanced gate stack (opens in a new tab)

  18. Mechanistic study of plasma damage to porous low-k : process development and dielectric recovery

    … of Cu/low-k interconnect. However, during the O2 plasma ashing process, the porous low-k dielectrics tend to degrade due to methyl depletion, moisture uptake, and densification, increasing the dielectric constant and leakage current. This dissertation presents a study of the mechanisms of …

    texas Repository record for Mechanistic study of plasma damage to porous low-k : process development and dielectric recovery (opens in a new tab)

  19. Organic Thin Film Transistor Integration

    … To enhance device performance, optimization of plasma enhanced chemical vapor deposited (PECVD) gate dielectric thin film and investigation of interface engineering methodologies are explored. To advance device manufacture, OTFT fabrication strategies are developed to enable organic circuit …

    waterloo Repository record for Organic Thin Film Transistor Integration (opens in a new tab)

  20. INFLUENCE OF POLYMER STRUCTURE ON PLASMA-POLYMER INTERACTIONS IN RESIST MATERIALS

    The controlled patterning of polymer resists by plasma plays an essential role in the fabrication of integrated circuits and nanostructures. As the dimensions of patterned structures continue to decrease, we require an atomistic understanding underlying the morphological changes that occur during …

    maryland Repository record for INFLUENCE OF POLYMER STRUCTURE ON PLASMA-POLYMER INTERACTIONS IN RESIST MATERIALS (opens in a new tab)

Page 1 of 5