Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 59 for “"OPAL RT"”.
-
Vehicle to grid (V2G) for reliable microgrid operation: Voltage/frequency regulation and real-time OPAL-RT digital simulation
… designed control system. Droop strategy and virtual inertia will be utilized in a unique Unified control with Virtual Inertia, further by adding another unique approach to the MPPT algorithm, by designing an active power point tracking system to give the system an extra capability for …
-
EXPERIMENTAL INVESTIGATION OF OPEN-SWITCH FAULTS FOR INTERFACING INVERTERS IN MICROGRIDS USING OPAL-RT REAL-TIME SIMULATOR TEST BENCH
… typically involve power electronic DC-to-AC inverters interfacing with the grid. In this thesis, the research is focused on the experimental investigation of open-switch faults in these interfacing inverters in a microgrid. To conduct the experiment, various single and multiple open-switch faults …
-
Real time hardware implementation of power converters for grid integration of distributed generation and statcom systems
Deployment of smart grid technologies is accelerating. Smart grid enables bidirectional flows of energy and energy-related communications. The future electricity grid will look very different from today's power system. Large variable renewable energy sources will provide a greater portion of …
-
Conception d’un convertisseur multiniveau basé sur une commande par FPGA et un lien de communication série à faible latence
… commande. La réalisation d’une maquette de convertisseur Modular Multilevel Converter (MMC) permettant la validation expérimentale de modèles est le sujet de ce mémoire. Ce projet est réalisé en partenariat avec l’entreprise Opal-RT Technologies, qui se spécialise dans la simulation temps réel. …
-
A HARDWARE-IN-THE-LOOP EXPERIMENTAL TESTBED FOR THE EVALUATION OF POWER GRID STABILITY AND SECURITY
… lines. The simulated NCS is implemented on an Opal-RT platform, which is a PC/FPGA based real-time simulator that can integrate hardware with software based simulations, commonly referred to as hardware-in-the-loop (HIL). In general, HIL setups have the advantage that physical elements under …
-
Thermal Management of Power Electronic Converters in Electric Motor Drives Using Active Thermal Control and Active Cooling
The application of power electronic converters (PEC) in electric vehicles (EVs) has significantly increased due to their enhanced controllability and flexibility. Additionally, Permanent Magnet Synchronous Machines (PMSMs) are favored in EVs for their higher torque, efficiency, performance, and …
-
Control Strategies and Stabilisation Techniques for DC/DC Converter
… bridge (DAB) and quad active bridge (QAB) converters in low-voltage DC (LVDC) microgrids supplying resistive loads, constant-power loads (CPLs) and pulsed-power loads (PPLs). These loads, the coupling between the ports of multiport converters and the nonlinear converter dynamics make fast and …
-
Power Hardware in the Loop (PHIL) Simulation of Battery Packs
… and tested for PHIL implementation using the OPAL-RT. The single particle model was chosen for its simplicity and to investigate the internal states of the battery with a real load with PHIL simulations.
-
Real time adaptive relay settings for Microgrid protection verified using Hardware in Loop
… with high source impedance which limit the short circuit current. The value of short-circuit current is limited due to converters used which limit the current to a maximum of 1.1 to 1.5 times maximum rated load current. This can result in faults during the islanded mode of microgrid to go …
-
Data-Driven, Large-Scale, Distributed EV Charging Control Supported with Machine Learning
As the electrification of transportation gains speed, the concerns around the impacts of mass electric vehicle (EV) - grid integration (EVGI) on the power distribution grid are rising. Proposed solutions to control and coordinate the EV charging mostly approach the problem from a centralized and …
-
Implementation Of A Novel Cooperative Protocol for Distributed Voltage Control in Active Distribution Networks
… controller boards. The real time simulator Opal-RT has been used to create a microgrid model. Hardware testing is done in real time.
-
Adaptive underfrequency load shedding based on real time simulation
… UFLS but these studies have been using virtual PMUs. Of late, hardware implementations for adaptive UFLS scheme using actual Phasor Measurement Units (PMUs) are reported but also these studies are based on small power systems. This study presents hardware implementation of adaptive UFLS …
-
STUDY OF ELECTRIC VEHICLE CHARGING STRATEGIES AND ENERGY MANAGEMENT IN POWER DISTRIBUTION SYSTEMS
… of providing grid services by using the PEV smart charging method, a study of distribution grid level vehicle - grid integration control with voltage regulation is conducted. In this study, the PEV charging control is designed at both Microgrid-level and distribution-level. The Microgrid …
-
Decentralized-Inverter Based Reactive Power Compensation of Active Meshed Distribution Network
… are interfaced through power electronic inverters. Dynamic response of voltage & frequency under events such as fault or load and/or transmission line switching, may lead to instability in the interconnected micro-grids. These inverters are programmable to work as a source or sink of reactive …
-
Modeling and stability analysis of AC and DC microgrids
… also to minimize the transmission losses. In certain cases of power blackouts they serve as main sources of power for some emergency loads. Traditionally A.C grids are preferred over DC grids to transmit power over long distances even though there are many problems associated with A.C grids such …
-
Real-time modeling and simulation of distribution feeder and distributed resources
… many programs were written for power-flow and short circuit analysis for the improvement of the electrical system. Real-time computer simulations can answer many what-if scenarios in the existing or the proposed power system. In this thesis, the standard IEEE 13-Node distribution feeder is …
-
PHOTOVOLTAIC ARRAY MAXIMUM POWER POINT TRACKING DIGITAL IMPLEMENTATION AND EFFICIENCY ANALYSIS
… power point tracking (MPPT) algorithms, 'Perturb and Observe' and 'Incremental Conductance.' The system includes a commercial-off-the-shelf PV array, buck DC-DC converter, lead-acid batteries as its energy storage system and load, and an Opal-RT real-time simulator for rapid control …
-
Multi-rate real-time simulation of modular multilevel converter using CPU and FPGA
… simulation of a modular multilevel converter (MMC) using Field Programmable Gates Array (FPGA). Undertaking such a project raises challenges due to the very high number of components in MMC. The choice of the hardware used is justified by this particular problematic. Using FPGA, a very …
-
Low Bandwidth Communication for Networked Power Hardware-In-The-Loop Simulation
… and validation of power hardware components in virtual power system schemas with near real-time operation. This technique is increasingly used in the development cycle of many products to reduce design costs and increase design fidelity. The Hardware under Test (HuT) interfaces with a simulation …
-
Improvement of Transient Stability of Photovoltaic-hydro Microgrids Using Virtual Synchronous Machines
… rate of change of frequency in the system. Virtual synchronous machines have been used to enhance performance of a diesel hybrid minigrid but no studies have been performed to account for dynamics of a hydro system. A method is needed to improve the transient stability of photovoltaic-hydro …
Page 1 of 3