Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 93 for “"ORGANIC ADDITIVES"”.
-
Localized adsorption of organic additives during copper electrodeposition
… localized fluorescence patterns of adsorbed organic agents and correlate such adsorption with the changes in surface morphology accompanying electrolysis. In solutions of 5 $\mu$M DiOC$\sb6$(3)/0.01 M $\rm H\sb2SO\sb4$ with and without 0.05 M CuSO$\sb4$, confocal imaging revealed that …
-
Effect of certain organic additives on the morphology of electrodeposited zinc, The
Includes bibliographical references.
-
Hydrophobic coatings and organic additives in Hellenistic-Roman mortars: the case study of Crete
… micro-spectroscopy for detecting and identifying organic additives in mortar matrices. The advantage of the method to provide spatially resolved data non-destructively, was balanced against reported limitations associated with reflectance spectral distortions and interference of inorganic mortar …
-
Study of the Surface Chemistry and Dissolution Rate of Gold in ThiosulfateSolutions with Organic Additives
… of gold with theleaching solution.The organic compounds 2‐thiouracil, 3‐mercaptopropionic acid, and L‐cysteine were studied foruse as additives in thiosulfate leaching solutions. It was found that 2‐thiouracil quickly formed a selfassembledmonolayer (SAM) and this minimized the …
-
In situ studies of copper electrodeposition in the presence of organic additives using atomic force microscopy
In the present study we investigated electrodeposition of Cu from sulfuric acid solutions. Three different substrates were used to investigate the effect of various variables on electrodeposition.
-
In-Depth Study of Different Magnetorheological Fluid Properties Under Different Operating Parameters, and in Presence of Organic Additives
… surface coating and elastic SEBS bead additives to enhance MRF colloidal stability (measured using an in-built setup) and alter viscoelastic properties. respectively. Finally, MRF chain characteristics (the strength, speed, and structure of MRF chains) were also studied as a function of …
-
Tribochemical interaction of newly developed organic lubricant additives with ZDDP; the influence of organic additives on tribological performance of ZDDP
… efficient, environmentally friendly lubricant additives. Zinc dialkyldithiophosphate (ZDDP) and friction modifier (FM) are considered as the most important lubricant additives for the tribological performance under boundary lubrication condition. ZDDP is an effective anti-wear (AW), …
-
A study of some of the factors related to the mechanism of scale prevention by organic additives of higher boiler pressure
Thesis (M.S.)--Michigan State University of Agriculture and Applied Science. Dept. of Chemical Engineering, 1960
-
Impact of organic compounds on arsenic toxicity in arsenopyrite biooxidation for pretreatment of refractory gold ore.
… days, limit its broader application. The use of organic additives has been explored to accelerate oxidation, but the mechanisms by which they influence biooxidation remain unclear. However, there is a lack of understanding of the underlying mechanisms by which these additives influence …
-
Influence of additives on stabilization and mineralization pathway of amorphous calcium carbonate nanoparticles
… phase in various organisms. The presence of organic additives has been shown to affect the mineralization pathway in solution by either inhibiting the aggregation of ACC or stabilizing it. In this study, ACC was precipitated in solution within a poly (acrylic acid) (PAA) matrix. AFM imaging …
-
Studies of interfacial adhesion and copper plating chemistry for metallization of through-package-vias in glass interposers
… TPVs, 2) electrochemical characteristics of organic additives in electrolytic Cu plating, and 3) the mechanism of how organic additives in electrolytic Cu plating enable void-free Cu filling in vias. Various Cu to glass adhesion mechanisms were investigated. Glass surface roughness was first …
-
Synthesis of Novel Zinc Anode via Electroplating for Rechargeable Hybrid Aqueous Batteries
… however, hold a drawback as they utilize organic electrolytes. The use of organic electrolytes not only raises safety and environmental concerns, but also results in a higher manufacturing cost than would be with aqueous electrolytes. Therefore, these issues can be solved by replacing the …
-
Tunable Copper Microstructures in Blanket Films and Trenches Using Pulsed Electrodeposition
… trench deposited samples, where the influence of organic additives, typically used in the electrolytic bath to produce defect-free filling of advanced geometries, on the copper microstructure was studied. With the addition of organic additives, depositions produced finer grained structures with an …
-
ΗΛΕΚΤΡΟΛΥΤΙΚΗ ΑΠΟΘΕΣΗ ΝΙΚΕΛΙΟΥ ΜΕ ΧΡΗΣΗ ΠΑΛΜΙΚΟΥ ΡΕΥΜΑΤΟΣ ΜΕΤΑΒΑΛΛΟΜΕΝΗΣ ΦΟΡΑΣ
… WITH A MECHANISM ANALOGOUS TO THE ACTION OF ORGANIC ADDITIVES UNDER DIRECT CURRENT CONDITIONS. IN THIS WAY, P.R.C. TECHNIQUE REINFORCES THE SELECTIVE PERTURBATION PHENOMENA OF THE CRYSTAL GROWTH AND PERMITS THE PREPARATION OF SMOOTH AND HARD DEPOSITS IN THE ABSENCE OF ORGANIC ADDITIVES.
-
Single electron transfer in organic synthesis targeted towards sustainable manufacture
… technology has received considerable interest in organic synthesis in recent years. Single electron transfer gives rise to unconventional modes of reactivity and intermediates, thus serving as a platform for innovative bond constructions, deconstructions and functional group transformations. This …
-
The Role of the Halides as Addition Agents During the Electrodeposition of Copper
… been found to be increased by the presence of organic additives in the solution. The polarization during the first 30 seconds of electolysis has been interpreted using the knowledge obtained from the radiotracer work.</p>
-
Transport properties for ionic liquids used in next generation high capacity batteries
… benefits over the more volatile, combustible organic solvents currently used. However, in order to gain a more profound understanding of transport in these electrolytes, properties such as conductivity, transference numbers, and salt activity must be measured as a function of salt …
-
Electrodeposition of Cobalt for Advanced Interconnect Applications
… It is can be achieved by adding small amounts of organic additives to the plating bath, which lead to the Co electrodeposition preferentially at the bottom of trench, known as bottom-up filling, or super conformal filling, or simply “super-filling”. As the size of interconnect continues to shrink, …
-
Effect of natural organic matter and a biosurfactant on arsenic mobilization from mine tailings
… the mine tailings in the presence of a natural organic matter (NOM, represented by a Fluka humic acid, HA) and a biosurfactant (represented by JBR425, mixed rhamnolipids), and to evaluate the feasibility of using NOM and biosurfactant in remediating arsenic contaminated mine tailings or soils. …
Page 1 of 5