Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 48 for “"Offset voltage"”.

  1. Design of a Precision Low Voltage Resistor Multiplying Digital-to-Analog Converter

    This work aims to model the effect of the input offset voltage of an operational amplifier on the performance of a high-precision, voltage-mode, resistor-based multiplying digital-to-analog converter (M-DAC). Based on the model, a high precision current buffer is proposed to isolate the resistor …

    tamu Repository record for Design of a Precision Low Voltage Resistor Multiplying Digital-to-Analog Converter (opens in a new tab)

  2. Modeling the Heterojunction Bipolar Transistor for Computer Aided Simulation

    … of the HBT, however, is the presence of an offset voltage from the emitter to the collector. This voltage raises the output low voltage in saturating logic circuits which reduces the low noise margin and also increases the device power consumption, both undesirable traits. An analytical …

    ucf Repository record for Modeling the Heterojunction Bipolar Transistor for Computer Aided Simulation (opens in a new tab)

  3. Novel approaches in current-feedback operational amplifier design

    … with the emphases of improving CMRR, bandwidth, Voltage-Offset and Slew-rate performance. The majority of the results of this work have been reported by the author in references [11 to [6]. Initially a thorough analysis of the conventional CFOA was undertaken to provide an in depth understanding …

    oxford-brookes Repository record for Novel approaches in current-feedback operational amplifier design (opens in a new tab) Download PDF for Novel approaches in current-feedback operational amplifier design (opens in a new tab)

  4. HIGH SPEED, HIGH RESOLUTION COMPARATOR FOR A/D APPLICATIONS

    … parameter. The investigation shows that the offset voltage VOFF ls a big limitation. Offset voltage is inherently present in all operational amplifiers. A comparator consists of such a high gain amplifier and a latch circuit to generate CMOS compatible outputs. A novel method of offset …

    nus Repository record for HIGH SPEED, HIGH RESOLUTION COMPARATOR FOR A/D APPLICATIONS (opens in a new tab) Download file for HIGH SPEED, HIGH RESOLUTION COMPARATOR FOR A/D APPLICATIONS (opens in a new tab)

  5. Design of A Low-power Precision Op Amp with Ping-pong Autozero Architecture

    … “ping-pong” autozero architecture for automatic offset correction. The op amp is designed for extreme environment applications, operating across a wide temperature range (minus 180 degree Celsius to plus 120 degree Celsius) with low offset, low drift and low power consumption. This design has …

    ut-knoxville Repository record for Design of A Low-power Precision Op Amp with Ping-pong Autozero Architecture (opens in a new tab)

  6. Analyses and design strategies for fundamental enabling building blocks: Dynamic comparators, voltage references and on-die temperature sensors

    <p>Dynamic comparators and voltage references are among the most widely used fundamental building blocks for various types of circuits and systems, such as data converters, PLLs, switching regulators, memories, and CPUs. As thermal constraints quickly emerged as a dominant performance limiter, …

    iastate Repository record for Analyses and design strategies for fundamental enabling building blocks: Dynamic comparators, voltage references and on-die temperature sensors (opens in a new tab)

  7. CMOS Compatible 3-Axis Magnetic Field Sensor using Hall Effect Sensing

    … magnets showed proof of concept for hall voltage sensing, however, poor geometry of the structures led to a high offset voltage. A 1-axis Hall effect sensor was designed, fabricated and tested with a sensitivity of 1.12x10-3 mV/Gauss using the RIT metal gate PMOS process. Poor geometry and …

    rit Repository record for CMOS Compatible 3-Axis Magnetic Field Sensor using Hall Effect Sensing (opens in a new tab)

  8. Electromagnetic Interference (EMI) Resisting Analog Integrated Circuit Design Tutorial

    … to each other in terms of EMI-Induced input offset voltage and other important specifications such as current consumption. In this work, EMI-robust analog circuits are proposed, of which the architecture is based on source-buffered differential pair in the previous publications. The EMI …

    tamu Repository record for Electromagnetic Interference (EMI) Resisting Analog Integrated Circuit Design Tutorial (opens in a new tab)

  9. High Performance Analog Circuit Design Using Floating-Gate Techniques

    … addressed. An alternate approach to reduce the offset voltage of the amplifier is presented. The proposed approach uses floating-gate transistors as programmable current sources that provide offset compensation while being a part of the amplifier of interest during normal operation. This results …

    gatech Repository record for High Performance Analog Circuit Design Using Floating-Gate Techniques (opens in a new tab)

  10. Automatic Test System for Characterizing Operational Amplifiers

    … parameters of Operational Amplifiers- the Input Offset Voltage, Input Bias Current and Input Offset Current.

    ttu Repository record for Automatic Test System for Characterizing Operational Amplifiers (opens in a new tab)

  11. Novel approaches in voltage-follower design

    … programme was to design and develop novel voltagefollowerslbuffers, suitable for radio frequency (RF) applications. The emphases throughout has been on improving key characteristics, in particular distortion, operating bandwidth, input and output impedances, offset-voltage and power supply …

    oxford-brookes Repository record for Novel approaches in voltage-follower design (opens in a new tab) Download PDF for Novel approaches in voltage-follower design (opens in a new tab)

  12. Robust low-power digital circuit design in nano-CMOS technologies

    … power density due to slow scaling of supply voltage. Conventional design methods add large pessimistic safety margins to mitigate increased variability, however, they incur large power and performance loss as the combination of worst cases occurs very rarely. In-situ monitoring of timing …

    glasgow Download PDF for Robust low-power digital circuit design in nano-CMOS technologies (opens in a new tab)

  13. Low-Power Soft-Error-Robust Embedded SRAM

    … the reduced node capacitance and supply voltage coupled with high packing density and lack of masking mechanisms are primarily responsible for the increased susceptibility of SRAMs towards soft errors. Coupled with these are the process variations (effective length, width, and threshold …

    waterloo Repository record for Low-Power Soft-Error-Robust Embedded SRAM (opens in a new tab)

  14. Development of a Testing Station for Grid-Interactive Smart Inverter Systems

    … inverter systems are considered a solution to offset voltage and frequency fluctuations, which arise due to this power imbalance. The objective of this work is to develop a system for testing grid-enabled inverters. These inverters use one or more communication standards to control their …

    portland-state Repository record for Development of a Testing Station for Grid-Interactive Smart Inverter Systems (opens in a new tab)

  15. Investigating Input Offset Reduction with Timing Manipulation in Low Voltage Sense Amplifiers

    … and can only generate a limited differential voltage during this read window, typically between 10mV to 100mV. Standard logic devices cannot read this small signal, so sense amplifiers are used to rapidly amplify it to logic levels. A key metric for a sense amplifier’s performance is its …

    waterloo Repository record for Investigating Input Offset Reduction with Timing Manipulation in Low Voltage Sense Amplifiers (opens in a new tab)

  16. High Voltage Analog Design in a Standard Digital CMOS Process

    This thesis introduces high-voltage approaches that are implemented in an analog Hall-effect sensor interface. This interface has been realized in a modified 5V 0.6um CMOS process using 40V high-voltage MOS transistors that do not affect low-voltage device functionality. These circuits include a …

    byu Repository record for High Voltage Analog Design in a Standard Digital CMOS Process (opens in a new tab) Download PDF for High Voltage Analog Design in a Standard Digital CMOS Process (opens in a new tab)

  17. An integrated circuit x-ray sensing array based on a CMOS flip-flop cell

    … partially discharges the large photodiode to an offset voltage level which triggers the flip-flop. The sensitivity of the flip-flop sensing cell is increased by 44 dB using a synchronous pulsed power bus for level detection. A digital-level serial output is obtained from the chip. The chip design …

    njit Repository record for An integrated circuit x-ray sensing array based on a CMOS flip-flop cell (opens in a new tab)

  18. Analysis and Characterization of a SiGe BiCMOS Low Power Operational Amplifier

    … of the op amp include rail-to-rail output voltage swing, low input offset voltage, high open-loop gain and low supply current. The characterization of op amp is done for extreme temperatures and the results demonstrate that the op amp is fully functional across the lunar surface temperature …

    ut-knoxville Repository record for Analysis and Characterization of a SiGe BiCMOS Low Power Operational Amplifier (opens in a new tab)

  19. A low power biosensor for medical applications

    … in the low frequency and suppressed the DC offset voltage between the two input signals. Therefore, this structure is suitable for bio-medical applications. The bio-medical signals are smaller than 5 mV in the low frequency between 0.01 Hz and 1 kHz. After amplifying, the signals will be …

    umn Repository record for A low power biosensor for medical applications (opens in a new tab)

Page 1 of 3