Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 119 for “"Oil Sand"”.
-
Oil Sand Remediation
Oil sand has become an important part of the Canadian economy. It is also a natural, toxic substance. Bitumen and clay suspensions are discussed in context of their position in the biogeochemical carbon and rock cycles, respectively. In the first section, bitumen is described as a product of soil …
-
Carbon Fibers From Athabasca Oil-Sand Asphaltenes
… this study was to utilize such refined Athabasca oil-sand-asphaltenes to produce precursor fibers and convert them into carbon fibers. Various such grades were investigated to determine the effect of impurities and thermal treatment on the processing and properties of carbon fibers. The samples …
-
Factors affecting Athabasca oil sand sludge stability.
The two major oil sand extraction plants, Syncrude Canada Ltd. and Suncor Inc., utilize the Clark Hot Water Extraction Process to remove bitumen from surface mineable Athabasca oil sands. This process produces a waste stream containing dispersed clay, sand, silt, and bitumen which is pumped to …
-
The dispersing action of polysaccharides in oil sand slurries
… (MWDs) were researched as dispersants of oil sand slurries. The molecular weights and MWDs were determined by analytical ultracentrifugation. Viscometric studies on dilute solutions indicated semi-flexible, random coiling behavior of the polymers assuming an extended conformation in …
-
On Stability in Gravity Drainage Oil Sand Recovery Process
… – the greater the heat flux, the larger the oil volume heated and the higher the oil drainage rate. Stability phenomena in SAGD occur both at the edge of the chamber and at the liquid pool that exists above the production well. Previous studies have demonstrated that instability at the steam …
-
Kinetics of gasification and sulphur capture of oil sand cokes
Kinetics of steam gasification of both delayed and fluid cokes, byproducts from thermal cracking processes of Athabasca bitumen, have been studied in laboratory-size stirred and fixed bed reactors. The hydrogen sulphide in the product gas was captured in-situ using calcined dolomite and limestones …
-
Elasto-plastic deformation and flow analysis in oil sand masses
… of stresses, deformations and fluid flow in oil sand layers are important in the design of an oil recovery process. In this study, an analytical formulation is developed to predict these responses, and implemented in both 2-dimensional and 3-dimensional finite element programs. Modelling of …
-
Thermally Induced Wettability Change During SAGD for Oil Sand Extraction
… technique that significantly increases ultimate oil recovery from oil sand reservoirs. Because SAGD is one of the newest proven thermal oil recovery techniques, laboratory test and field pilot efforts are in progress to enhance oil recovery by using less energy and water for steam generation. …
-
Comparative Evaluation of Electrical Heating Methods for Oil Sand Reservoirs
For thermal heavy oil recovery, conventional steam injection processes are generally limited to reservoirs of relatively shallow depth, high permeability, thick pay zones and homogeneity. An alternative approach of applying electrical energy, including methods of electric heater, electrical …
-
HEAVY OIL-SAND MODELING DURING THERMAL PRODUCTION AND ITS SEISMIC RESPONSE
… focuses on the study of the change of heavy oil-sand properties during thermal production. It characterizes the heavy oil-sand properties on micro-scale and macro-scale. The key contributions of this dissertation include the measurements and comparison of pre-steam and post-steam oil-sand …
-
A stress-strain model for the undrained response of oil sand
… undrained model for the deformations analysis of oil sand masses upon undrained loading is presented in this thesis. An analysis which couples the soil skeleton and pore fluids is used. The soil skeleton is modeled as a non-linear elastic-plastic isotropic material. In undrained conditions, the …
-
Hydraulic Properties Of Aggregated Oil Sand Material From The Athabasca Deposit
Of crucial importance to the reclamation of oil sands mining-affected areas, is creation of a soil medium capable of supporting a target ecosystem. A considerable portion of these landscapes contain coarse-textured soils, which have poor water retention. Furthermore, many soils naturally contain …
-
Dewatering Behavior of Centrifuged Oil Sand Fine Tailings for Surface Deposition
… the material cannot be readily reclaimed as a soil. The required improvement is achieved through subsequent dewatering in the disposal facility by evaporation that, in turn, is governed by the prevalent climate. Centrifuge technology is being adapted as part of long time management of oil sand …
-
Bearing Capacity of Multilayer-deposited In-line Flocculated Oil Sand Tailings
Oil sands tailings exhibit poor consolidation and settling behavior when conventional deposition techniques are used; therefore tailings management is a great challenge in the oil sands mining industry. The objectives of this research were to gain an in-depth understanding of the dewatering …
-
Drying Behavior of Oil Sand Mature Fine Tailings Pre-dewatered with Superabsorbent Polymer
Oil sand processing to extract bitumen generates large volumes of slurry comprising water, silt, sand, clay, unrecovered bitumen, and residual chemical aides and solvents added during the extraction process. The by-product stream of the bitumen extraction is pumped into constructed tailings ponds. …
-
Shear behvaiour of oil sand fine tailings in simple shear and triaxial devices
Oil Sand Fine Tailings are difficult to manage due to their poor consolidation characteristics. Once reaching about 35% solids content, they do not appreciably consolidate any further due to low hydraulic conductivity generated by the high dispersion of clay particles. Tailings at 35% solids do not …
-
Performance of Steam Assisted Gravity Drainage in Thin Oil Sand Reservoirs: Well Pair Configuration
… are targeted and performance of SAGD in thin oil sand reservoirs with changing the well configuration is studied. Specifically, the influence of the injection and production wellpair configuration as well as the number of injector wells in a homogeneous formation with thicknesses of 5, 7, and …
-
Application of Rhamnolipid and Microbial Activities for Improving the Sedimentation of Oil Sand Tailings
Densification of oil sand tailings deposited in the tailing ponds and recovering water from them are two major challenges issues in the oil sands surface mining industry. A small increase in the tailing settlement rate (which normally is very slow) can improve the densification of tailings and …
-
Application of Rhamnolipid and Microbial Activities for Improving the Sedimentation of Oil Sand Tailings
Densification of oil sand tailings deposited in the tailing ponds and recovering water from them are two major challenges issues in the oil sands surface mining industry. A small increase in the tailing settlement rate (which normally is very slow) can improve the densification of tailings and …
Page 1 of 6