Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"Oleophobicity"”.
-
Alternatives to fluorinated firefighting foams
… better stability than pure surfactant foams. The oleophobicity of the systems was also evaluated by looking at spreadability on heptane, absorption of an oleophilic dye, and contact angles. The oleophobicity decreased with increasing surfactant concentration, until it reached a plateau at around …
-
Bio-inspired Oleophobic/Conductive Micro/nano Structures and Their Applications in Frozen Oil Adhesion Reduction
… of structures and surface chemistry on superoleophobicity. In this stage, two different chemical modification approaches were applied to both flat and micropillared PDMS: 1) vapour deposition of trichloro (1H, 1H, 2H, 2H-perfluorooctyl) silane (FDTS) on cured polydimethylsiloxane (PDMS) …
-
ULTRATHIN GRAPHENE OXIDE MEMBRANES/COATINGS FOR SEPARATIONS
… approach. The supported GO membranes showed superoleophobicity and low oil-adhesion underwater. This could be ascribed to the hierarchically rough membrane surface and excellent water “locking” property of GO. The hierarchical roughness was introduced by the combination of the intrinsic …
-
STUDY OF PARTIAL HYDROLYSIS STRATEGY MODIFYING POLYACRYLONITRILE-BASED MEMBRANES FOR GREATLY ENHANCED ANTI-OIL FOULING PERFORMANCE IN OILY WASTEWATER TREATMENT
… membranes with greatly enhanced hydrophilicity, oleophobicity and anti-oil fouling properties. The output of current study are fresh insights and novel strategy for the hydrolysis modification of PAN membranes.
-
DEVELOPMENT OF NOVEL FUNCTIONALIZED MEMBRANES FOR ANTIFOULING PERFORMANCES IN WATER OR WASTERWATER TREATMENT
… membrane surfaces with both hydeophilicity and oleophobicity was prepared and tested with a broad spectrum of organic substances including protein, NOM and oils.
-
PVDF Membranes with Stable, Ultrathin Graphene Oxide (GO) Functional Coatings for Antifouling Oil/Water Separation under Cross-Flow Condition
… showed improved hydrophilicity and under water oleophobicity and thus minimized underwater oil adhesion on the membrane surface. And the oil/water separation results showed that by optimization of the GO coating thickness, greatly improved antifouling performance could be achieved. As a result, …
-
Use of wrinkles for fabrication of stretchable electrodes and omniphobic surfaces
… The combination of both structures achieved oleophobicity of more than 110°. The effectiveness of nanoparticles for low surface tension liquid were due to its re-entrant like structure. The omniphobic surfaces were also shown to be repellent to blood (>135°), making it a potential material …
-
Synthesis and Characterization of Oleophobic Fluorinated Polyester Films
… polyester content in blends. To facilitate the oleophobicity of PET films, the fluorinated polyesters terminated with -CF3 groups with two different Mw were synthesized and blended with PET. The results reveal that at low concentrations, low molecular weight polyesters migrate to the surface …
-
Synthesis of novel surfactants from biomass derivable starting materials and analysis of their properties
… tension reduction and extreme hydrophobicity and oleophobicity. However, perfluorinated surfactants are also toxic and persistent in the environment. Globally, the production and use of perfluorinated surfactants is being phased out due to regulatory pressures from Europe and the US. Therefore, …
-
Design, Synthesis, and Fabrication of Membranes and Modules for Water Desalination: Porous Materials with Special Wettability for Membrane Distillation
… create interfaces that show stable underwater oleophobicity. We also targeted the desalination of low-surface-tension water resources (e.g., solutions containing surfactants). Accordingly, by adjusting the process and reaction parameters in a liquid-free process, initiated chemical vapor …
-
Synthesis of environmentally-friendly polyurethane dispersions based on soybean oil- derived polyols and their applications in advanced water-based and uv-cure coatings
… developmental work, where hydrophobicity and oleophobicity of the coatings were improved to meet the goal of the project. Siliconated (Si) and fluorinated (F) polyol was utilized with indigenous soy-polyol, and 7 different polyurethane polymeric chains were fabricated with varying Si and F …
-
Deposition and Characterization of Hydrophobic Coatings
… or water permeability, electrical conductivity, oleophobicity, etc. However, whatever the final/desired properties, deposition via dry-deposition processes offers significant advantages, including greater reproducibility, increased environmental friendliness, and cost effectiveness on an …
-
Stimuli-Responsive Membranes for Membrane Distillation of Oily Waters
… of the PVDF-PAA membrane and its underwater oleophobicity. Analyses of the proposed models showed that the underwater oleophobicity of the PVDF-PAA membrane can be attributed to the combined effect of the PAA patches on the top of the surface roughness features as well as the air-water …
-
Surface Modification of Synthetic and Natural Polymers using Deep Uv (172 Nm) Irradiation
… a marked increase in hydrophobicity and oleophobicity, in some cases reaching that close to pure polytetrafluoroethylene. The grafted surface was found to be significantly wash durable. This is a valuable development as the process is minimally hazardous, relatively simple, fast, …
-
Fabrication of surfaces with controlled wetting properties on porous substrates using non-fluorinated chemicals
… to initiate the polymerization process. The oleophobicity of PBZ coated paper samples is closely related to both the degree of polymerization of PBZ and the amount of PBZ on the paper. Paper samples with a loading of 10.6 mg/cm2 of PBZ display prolonged resistance against oils after curing at …
-
Wettability & coalescence modulation of water droplets through surface engineering, surfactants and electrowetting
… not all textured elastomers exhibited superoleophobicity (in water). Thirdly, droplet roll-off was not observed on any textured elastomer and polymer surface, despite very favorable contact angles, indicating that high contact angles do not always translate to …
-
Biomimetic artificial cell plasma membranes-on-a-chip for drug permeability prediction
… (PFOS) on surface hydrophobicity and oleophobicity. To assess their effect on reducing the rate of aqueous droplet evaporation, I tested surface treatment of PDMS with Teflon AF or Aquapel. I also tested modifications to the device fabrication process by bonding a glass coverslip to …