Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 18 of 18 for “"One-Way Slabs"”.
-
Rehabilitation of one-way slabs using pre-stressed concrete prisms
… by 9 mm diameter seven-wire strands. Six one-way slabs with dimensions of 3000 mm in length, 600 mm width and depth of 200 mm were cast, then cracked and subsequently rehabilitated with PCPs. Deflected profiles and crack widths of the slabs before and after rehabilitation were compared in …
-
Textile Reinforced Concrete Structures - Bending tests of one-way slabs
… thesis, experiments on carbon fibre reinforced one-way concrete slabs were carried out, to study the flexural behaviour in four-point bending tests. The aim of this Master’s thesis project was to provide data for further development of modelling methods for TRC and give new insights in the …
-
Compressive Membrane Capacity Estimates in Laterally Edge Restrained Reinforced Concrete One -Way Slabs
… for laterally restrained reinforced concrete one-way slabs is developed for field use. The estimate uses the axial force-moment interaction equations and a ratio for the peak thrust to the slab's axial capacity. The resulting thrust enhanced moment capacities at the support and midspan hinge …
-
Flexural and Serviceability Behaviour of Steel-GFRP Hybrid Reinforced Concrete Beams and One-way Slabs
… behaviour of steel-GFRP hybrid RC beams and one-way slabs through testing and analyzing 15 RC beams and eight RC one-way slabs. The experimental results were analyzed and compared in terms of the first cracking moment and yielding moment, failure modes, flexural capacity, concrete and rebar …
-
Effect of High-Performance Concrete and Steel Materials on the Blast Performance of Reinforced Concrete One-Way Slabs
… innovative materials in reinforced concrete slabs and panels. As part of the study, a total of fourteen one-way slab specimens with different combinations of concrete, steel fibres and steel reinforcement are tested under simulated blast loads using the University of Ottawa Shock-Tube …
-
Impact of steel ductility on the structural behaviour and strength of RC slabs
… strength and ductility of reinforced concrete slabs. An extensive experimental program examining the ultimate strength, ductility and failure mode of one-way and two-way reinforced concrete slabs is described and the results are presented and analysed. A numerical finite element model is …
-
Strengthening of RC slabs with openings using CFRP systems
… systems in the strengthening of openings in RC slabs. In the study, the concept of strong bands, as indicting a zone for strengthening, was derived first for both one-way and two-way slabs using parametric studies. Thereafter, the required FRP reinforcement was derived for small and large …
-
Fibre reinforced seawater and sea-sand and concrete for marine structures
… developed concrete was used in the casting of one-way slabs reinforced with glass fibre reinforced polymer (GFRP) bars. Flexural test results showed that the combination of GFRP bars with SWSS concrete could be reliably used in the construction of concrete slabs. Adding fibres resulted in a …
-
Σύμμεικτες πλάκες από παραμένοντες τύπους ινοπλεγμάτων σε ανόργανες μήτρες και οπλισμένο σκυρόδεμα: πειραματική διερεύνηση μηχανικής συμπεριφοράς και βέλτιστος σχεδιασμός
… the experimental and analytical investigation of one-way concrete slabs cast over Stay-In-Place formwork elements produced from cementitious composite materials reinforced with textile structures from non-metallic continuous fibers (Textile Reinforced Mortar). In this dissertation the development …
-
Service and Ultimate Limit State Flexural Behavior of One-Way Concrete Slabs Reinforced with Corrosion-Resistant Reinforcing Bars
… to traditional black steel. Flexural tests of one-way slabs were conducted to simulate negative transverse flexure over a bridge girder as assumed in the commonly employed strip design method. The bar types studied were Grade 60 (uncoated), epoxy-coated reinforcing (ECR, Grade 60), Enduramet 32 …
-
Studying the Influence of Cracking on The Behaviour of Reinforced Concrete Beams using Distributed Fibre Optic Sensors
… beams and the second three lightly reinforced one-way slabs. All of the specimens were instrumented with distributed fibre optic sensors (DFOS) to measure reinforcement and concrete surface strains. The continuous beams were one degree statically indeterminate and had two asymmetric span …
-
Enhancing Ductility of One-Way Concrete Slabs Reinforced With Welded Wire Reinforcement
… and minimum reinforcement required for WWR slabs. The effect of different types of WWR coating on mechanical properties were investigated. The dissertation next examined the effects of strain rate on the mechanical properties of WWR and traditional rebar. In total, fifty four slabs have been …
-
Durability Study on Concrete Bridge Decks With Pultruded FRP Stay-in-Place Structural Forms
… were thawed without being submerged and one specimen had perforated forms for drainage. Subsequent testing to failure showed no reduction in ultimate capacity or stiffness, despite the 23% reduction in tensile strength of GFRP coupons from the same form, because failure was governed by …
-
A generic mechanics approach for predicting shear strength of reinforced concrete beams.
… and with any bond properties. Moreover, no component of the proposed approach relies on empiricism to account for the mechanics of shear failure, and the approach can accommodate any material characteristics which with time can be refined and revisited to improve the accuracy of shear strength …
-
Strength and Serviceability of Concrete Elements Reinforced with High-Strength Steel
… topics: (i) minimum flexural reinforcement in slabs and walls, (ii) maximum flexural reinforcement in beams, and (iii) crack widths and deflections. Nine slabs with gross longitudinal reinforcement ratio (𝜌𝑔) between 0.07% and 0.18%, four walls with 𝜌𝑔 between 0.07% and 0.24%, and six …
-
Effect of FRP Anchors on the FRP Rehabilitation of Shear Critical RC Beams and Flexure Critical RC Slabs
… techniques and clamps have been explored to postpone and/or delay the debonding process which results in premature failure. FRP anchors are of particular interest because they can be selected to have the same material properties as the FRP sheets that are installed for strengthening or repair of …
-
Numerical analysis of the influence of end restraints on the fire resistance of continuous reinforced concrete beams and slabs
… shows that the underground structures are always subjected to more severe fire disasters. Fire accidents in underground structures experience higher and longer temperature histories. From the structural side of view, the most obvious difference between the underground ones and the ones above …