Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 193 for “"Open circuit potential"”.

  1. Corrosion of titanium and titanium alloys in aqueous acid electrolyte

    … sulphuric acid electrolytes were studied using open circuit potential measurements, potentiodynamic techniques, and long term immersion testing. The effects of acid concentration, alloying addition, temperature, and the iron and chloride content of the electrolyte were examined. The open circuit …

    ubc Repository record for Corrosion of titanium and titanium alloys in aqueous acid electrolyte (opens in a new tab) Download PDF for Corrosion of titanium and titanium alloys in aqueous acid electrolyte (opens in a new tab)

  2. Nanostructered Aminophenylporphyrin Films for Use in Bulk Heterojunction and Inverse Dye-Sensitized TiO₂ Solar Cells

    … phases. Poly-TAPP/PCBM cells exhibited short-circuit current densities of 140 μA/cm 2 and open-circuit potential values up to 500 mV under simulated full-sun illumination. An inverse dye-sensitized solar cell was developed by incorporating TiO2 into a dye-coated nanoporous poly-TAPP electrode. …

    portland-state Repository record for Nanostructered Aminophenylporphyrin Films for Use in Bulk Heterojunction and Inverse Dye-Sensitized TiO₂ Solar Cells (opens in a new tab)

  3. EFFECTS OF EXTERNAL PRESSURE ON SOLID STATE DIFFUSION OF LITHIUM IN LITHIUM-ION BATTERIES

    … electrodes, can be studied with respect to the open-circuit potential and the applied hydrostatic pressure. In this study, commercial thin film batteries were subjected to tests in a low-pressure chamber and in a dynamic materials analyzer simulating hydrostatic pressures between 0 and 115 KPa. …

    maryland Repository record for EFFECTS OF EXTERNAL PRESSURE ON SOLID STATE DIFFUSION OF LITHIUM IN LITHIUM-ION BATTERIES (opens in a new tab)

  4. Αλληλεπίδραση ηλεκτρομαγνητικής ακτινοβολίας με νανοδομημένους ημιαγωγούς

    … under external anodic bias, as well as under open circuit potential conditions. Samples prepared by thermal decomposition of SiO exhibit strong photoluminescence, at room temperature, in the near infrared and at energies higher than the band gap of bulk silicon (1.12 eV), as a result of …

    greece Repository record for Αλληλεπίδραση ηλεκτρομαγνητικής ακτινοβολίας με νανοδομημένους ημιαγωγούς (opens in a new tab)

  5. Physics-Based Li-Svo Cathode Model

    … particle Fick's second law approach with the open-circuit potential modeled with a Redlich-Kister equation. By assuming that lithium ions intercalate only through the ends of the cuboid SVO particles, the model is able to predict accurately the discharge profile of experimental cathode half …

    south-carolina Repository record for Physics-Based Li-Svo Cathode Model (opens in a new tab)

  6. Investigation and Advancement of Novel Single Compartment Hydrogen Peroxide Fuel Cells

    … and results are discussed. Enhancer-free output potential in the range of 0.57V to 0.62V was achieved in acidic peroxide electrolytes using the novel electrodes. Addition of a novel enhancer salt to the same setup results in an open circuit potential boost of 0.33V, resulting in an open circuit …

    guelph Repository record for Investigation and Advancement of Novel Single Compartment Hydrogen Peroxide Fuel Cells (opens in a new tab)

  7. Evaluation of Corrosion Mechanisms in Stainless Steel Orthodontic Retainer Wires

    … properties were evaluated with a potentiostat. Open circuit potential (mV) and current density (nA/mm2) were compared in tests 1-3, as well as charge (mC) in the galvanic test. Statistical comparisons were completed with analysis of variance (ANOVA) tests and T-tests.Results:One brand of …

    marquette Repository record for Evaluation of Corrosion Mechanisms in Stainless Steel Orthodontic Retainer Wires (opens in a new tab)

  8. Experimental study of reverse crevice corrosion of copper

    … electrochemical tests were conducted including open circuit potential measurement, potentiodynamic measurement and electrochemical impendence spectroscopy (EIS). Atomic Force Microscopy (AFM) and Raman Spectroscopy were used to analyze the surfaces of the copper coupon.The results of the …

    sask Repository record for Experimental study of reverse crevice corrosion of copper (opens in a new tab)

  9. Effect of Alloying with Palladium on the Corrosion Behavior of CoCr and NiCr Dental Alloys

    … in phosphate buffered saline at 24°C. The open circuit potential (OCP) was monitored for 20 hrs followed by linear polarization and cyclic polarization tests. OCP at 20 hrs, polarization resistance (Rp), and corrosion current density (Icorr) were compared using Kruskal-Wallis and …

    marquette Repository record for Effect of Alloying with Palladium on the Corrosion Behavior of CoCr and NiCr Dental Alloys (opens in a new tab)

  10. Detection of Biomolecules via OCP Measurements using NPG Electrodes

    … and cyclic voltammetry (CV). In this work, the open circuit potential (OCP) of ferricyanide, cysteine, uric acid, and ascorbic acid was measured in phosphate buffer solution (PBS) and biofouling solution containing bovine serum albumin (BSA) at pH 7.4. OCP measurement has been hindered due to …

    vcu Repository record for Detection of Biomolecules via OCP Measurements using NPG Electrodes (opens in a new tab)

  11. Investigation of Ultratrace Metallic and Organic Contaminants in Semiconductor Processing Environments

    … is based on direct measurements of the silicon open-circuit potential shift generated by the interaction between metallic ions and the silicon-based sensing surface. The new sensor can have practical applications in the on-line monitoring of microelectronic chemical processing. The detection of …

    unt Repository record for Investigation of Ultratrace Metallic and Organic Contaminants in Semiconductor Processing Environments (opens in a new tab)

  12. Development and Evaluation of NI-P-PTFE Based Nano-Composite Coatings for Medical Devices

    … and the coatings. While in the corrosion test, open circuit potential, polarization resistance (Rp), corrosion current density (Icorr), and corrosion rate (CR) were obtained by measuring the open circuit potential and anodic, cathodic tafel plots of Ni-P-PTFE-ZrO2 and Ni-P-PTFE-ZrO2-TiO2 …

    dundee Repository record for Development and Evaluation of NI-P-PTFE Based Nano-Composite Coatings for Medical Devices (opens in a new tab) Download PDF for Development and Evaluation of NI-P-PTFE Based Nano-Composite Coatings for Medical Devices (opens in a new tab)

  13. Development of an advanced DC-polarisation/AC-impedance cyclic test to evaluate the corrosion of electrically-conductive coating/substrate systems

    … impedance spectroscopy (EIS) evaluation at open circuit potential (EOCP). The (AC)DC/OCP/AC cyclic test provides valuable information concerning the corrosion behaviour of uncoated Al 6082 alloy (repeat tests are performed, to eliminate test protocol variables and improve the robustness of …

    whiterose Download PDF for Development of an advanced DC-polarisation/AC-impedance cyclic test to evaluate the corrosion of electrically-conductive coating/substrate systems (opens in a new tab)

  14. Influence of Fluoride and Stress on the Electrochemical Properties of Nickel-Titanium Coils

    … potentiostat and three tests were conducted: open circuit potential monitoring for 2 hours, a linear polarization scan, and a cyclic polarization test. The results showed the coils to possess a more noble OCP when in artificial saliva compared to fluoride. The non-compressed, artificial saliva …

    marquette Repository record for Influence of Fluoride and Stress on the Electrochemical Properties of Nickel-Titanium Coils (opens in a new tab)

  15. Interfacial Electrochemistry in Metallic Film Fabrication

    … using a Co/Pt rotating disk electrode. The Open Circuit Potential of Co electrode in CuSO4 electrolyte was recorded at different rotation rates. The reaction rates between Cu2+ and Co electrode were calculated under different conditions such as the thickness of Co substrate, the …

    eiu Repository record for Interfacial Electrochemistry in Metallic Film Fabrication (opens in a new tab)

  16. Mapeamento de corrosão localizada através de técnicas eletroquímicas e de imagem

    … The technique presented will be compared with open circuit potential measurement (OCP), anodic polarization and electrochemical noise tests, using some metal samples of stainless steel AISI 304L, immersed in NaCl solutions in concentrations of 1M and 3M. The chief advantage of colourimetric …

    brazil-uerj Repository record for Mapeamento de corrosão localizada através de técnicas eletroquímicas e de imagem (opens in a new tab)

  17. Electrochemistry of stress corrosion cracking of brass

    … and nonammoniacal aqueous solutions at open circuit potential applying a constant load technique. The SCC tests, using tensile stress and loop specimens, showed pure copper to be immune in all solutions tested, the (alpha)(beta)'-brass (60/39) alloy to be most susceptible to SCC, and the …

    iastate Repository record for Electrochemistry of stress corrosion cracking of brass (opens in a new tab)

  18. Laser Surface Alloying of Refractory Metals on Aluminum for Enhanced Corrosion Resistance: Experimental and Computational Approaches

    … the Al-Mo, Al-W, Al-Nb, and Al-Ta systems as a potential corrosion resistant coatings on aluminum. The refractory metal (Mo, W, Nb, Ta) precursor deposit was spray coated separately on aluminum substrate and was subsequently surface alloyed using a continuous wave diode-pumped ytterbium laser at …

    unt Repository record for Laser Surface Alloying of Refractory Metals on Aluminum for Enhanced Corrosion Resistance: Experimental and Computational Approaches (opens in a new tab)

  19. Electrochemical Investigation of Corrosion Resistance of Weldments in Steel Bridges

    … the laboratory. Four electrochemical tests: a) open circuit potential, b) Rp/Ec Trend, c) electrochemical impedance spectroscopy and d) potentiodynamic polarization, were identified and conducted to gain fundamentals to weldment corrosion in two commonly used bridge steels (A572 and A588). In …

    ndsu Repository record for Electrochemical Investigation of Corrosion Resistance of Weldments in Steel Bridges (opens in a new tab)

Page 1 of 10