Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"Open hole compression"”.
-
Standard Angle and Non-Standard Angle Composite Laminate Design and Modeling under Open-Hole Compression
… studies the design of composite laminates under open-hole compression (OHC) in this dissertation, with particular focus on aerospace applications. Composite laminates are studied with two primary motivations. First, the structural performance of laminate panels can be improved from a material …
-
Wing and Fuselage Optimization Considering Alternative Material
… CFRP material, the optimized weight results show Open Hole compression enhancement produces the most weight benefit. The Fatigue strength is the most sensitive material property for the baseline Aluminum Alloy structure. The results also indicate that the current CFRP laminate minimum gauge limits …
-
Finite Element Analysis Investigation of Hybrid Thin-Ply Composites for Improved Performance of Aerospace Structures
… efforts were performed using test data from open hole tension, open hole compression, notched tension, and notched compression specimens. Once the models were validated sufficiently, the same modeling practices were used to compare laminates with varying ply angle orientations and various …
-
Characterization and Analysis of Damage Progression in Non-Traditional Composite Laminates With Circular Holes
… lay-up, where theta =0,5 or 10, were tested in open hole tension, filled hole tension, open hole compression, single shear bearing, and unnotched tension. These coupon level tests illustrated the effects of lay-up, notch constraint, and load type on traditional and non-traditional laminates. Die …
-
An investigation of non-standard angle composite laminate design
… the limiting factor in composite structures, Open Hole Compression (OHC) testing has been carried out on non-standard and standard designs. The failure modes and failure strengths for the designs were analyzed. The NS designs were observed to be weaker due to fiber discontinuity. Modifications …
-
FULL-FIELD DAMAGE ASSESSMENT OF NOTCHED CFRP LAMINATES
… to the comprehensive damage assessment of open-hole compression (OHC) in composite laminates, under both static and fatigue loading. The relevance of the work comes from OHC being one of the two main tests used in industry to measure damage tolerance of composite material systems. The main …
-
Προσομοίωση βλάβης λόγω κρούσης σύνθετων υλικών σε αεροναυπηγικές εφαρμογές
… results is executed. •Simulation of compression after impact for laminated composite material coupon, estimation of residual strength and comparison with experimental results and compression before impact. •Micromechanical models of composite materials for evaluation of stress field …
-
Compressive Failure of Open-Hole Carbon Composite Laminates
The issue of how open-hole carbon composite laminates fail in compression is addressed in this paper. The author makes use of finite element analysis, coupled with SIFT and EFM, in order to predict failure of open-hole composite laminates. The results obtained from the simulations are then compared …
-
Studies of Damage Tolerance in Automated Fiber Placement Based Heterogeneous Meso-Architectured Carbon/ Epoxy Composite Laminates.
… of 250-400ft/s, low velocity impacts of 15-55 J, open hole tension and open hole compression. C-scans and digital image correlation techniques are employed to better understand the experimental response. The hybrid MAC laminates demonstrate a significant 45% reduction in back-face surface damage, …
-
Advancing double-double composite laminates as next-generation alternatives to traditional quad laminates
… SEDD architectures. Unnotched tension, unnotched compression, Open-Hole Tension (OHT), Open-Hole Compression (OHC), and flexural tests were performed on a diverse set of laminates to comprehensively assess the in-plane and out-of-plane mechanical performance.<br/><br/>While the standard four-ply …
-
Thermal, rheological, and mechanical properties of a polymer composite cured at staged cure cycles
… beam shear (SBS) strength, combined loading compression (CLC) strength, CLC modulus, CLC Poisson’s ratio, open-hole compression (OHC) strength, and OHC modulus. The SBS, CLC, and OHC tests were performed at room temperature to obtain the mechanical properties. For the one-stage cure cycles …