Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Open microchannels"”.
-
Capillary Flow and Evaporation in Open Microchannels
… devices to printed electronics manufacturing. Open rectangular microchannels often appear in these applications, with the lack of top resulting in a complex free-surface morphology and evaporation. While prior work has demonstrated that evaporation hinders capillary flow, the underlying …
-
Flow Boiling Heat Transfer Over Open Microchannels With Tapered Manifold
… to fluid difference. Flow boiling with microchannels has shown a great potential with its high surface area to volume ratio and latent heat removal. However, flow instabilities and early critical heat flux (CHF) have prevented its successful implementation. A novel flow boiling design …
-
Pool Boiling Enhancement Through Improved Liquid Supply Pathways Over Open Microchannels
… liquid supply pathways to nucleation sites in open microchannels. A two part study is conducted to enhance pool boiling performance of open microchannels. Micromachined and porous surfaces are identified as enhancement techniques in Part-I and Part-II respectively. The results obtained in …
-
Enhanced pool boiling of water with open microchannels over cylindrical tubes
… the boiling heat transfer rates with an array of open microchannels over a cylindrical tube. In order to develop high performance surfaces, rectangular and V-groove cross-sectional geometry microchannels were fabricated and tested over tubular test sections. These microchannels were manufactured …
-
Flow Boiling in Open Microchannels with Tapered Manifolds using Ethanol in a Gravity-Driven Flow
… electronics. Previous works have proven open microchannels with tapered gap manifolds are effective in delivering enhanced flow boiling performance, with significant reductions in pressure drop. This work explores the feasibility of employing ethanol as a dielectric fluid in an open …
-
Enhancement of Pool Boiling Heat Transfer using a Combination of Open Microchannels and Microporous Surfaces
… employed to selectively coat the fin tops of open microchannel structures. Effects of geometrical parameters of the microchannels were investigated on pool boiling performance at atmospheric pressure. A maximum value of critical heat flux of 3,250 kW/m2 was obtained for Chip 9 (fin width = 200 …
-
ENHANCEMENT OF SPRAY COOLING HEAT TRANSFER USING EXTENDED SURFACES AND NANOFLUIDS
… deposition. The addition of high aspect ratio open microchannels to the sprayed surface resulted in significant enhancement at all wall superheats and over 200% enhancement in the low temperature single-phase regime. The two-phase regime began at lower temperatures with microchannels, which …
-
Flow and Drying Dynamics in Gravity- and Capillary-Driven Coating Processes
… Chapters 3–5 focus on capillary-driven flows in open microchannels. First, in Chapter 3, capillary flow dynamics of non-evaporating liquids are studied and compared against existing theoretical models. In Chapter 4, this work is extended to open microchannels fabricated using several …
-
Liquid flow in open metal oxide channels of controlled surface chemistry
Open microchannels offer many advantages over conventional closed channels, such as relatively simple fabrication, straightforward cleaning, and easy surface modification. However, only a few studies have been performed on the dynamics of the liquid transport in these channels. A thorough …
-
Concentration of Phosphorylated Proteins Using Modified PMMA Microanalytical Devices
… proteins on nitroavidin−functionalized PMMA open microchannels, while high capture efficiency (96 ± 0.5%) for bound biotinylated proteins were observed on PMMA microchannels with fabricated microposts. To further improve the efficiency of capture and release processes, PMMA …
-
New Approaches for Printed Electronics Manufacturing
… printing approach. In the second method, open microchannels, imprinted in plastic substrates, are filled with a controlled amount of metal using liquid-based additive processes, to obtain conductive wires flush with the substrate surface. Finally, this thesis addresses the issue of overlay …
-
Rectified electroosmotic flow in microchannels using Zeta potential modulation – Characterization and its application in pressure generation and particle transport
… devices using electroosmotic flows (EOFs) in microchannels have been developed and widely applied in chemistry, biology and medicine. Advantages of using these devices include the reduction of reagent consumption and duration for analysis. Moreover the velocity profile of EOFs, in contrast to …
-
Μελέτη της ροής σε ανοιχτούς κεκλιμένους μικροαγωγούς
… of the liquid phase, flowing in inclined open microchannels, have been investigated experimentally. Experiments have been conducted in three microchannels of different width (i.e. 1200, 600 and 300 μm) while distilled water, two aqueous solutions of glycerol and two aqueous solutions of …
-
Influence of neuroimplant materials, drugs and drug-material combinations on healthy cells of the brain
… could be adjusted by scaffold size, porosity, open microchannels and infiltrated drug concentration. In vitro studies showed a sufficient treatment efficiency in GBM cells whilst not affecting astrocytes stronger than the free drug. Similar to this material scientific approach, graphene based …
-
Fabrication and Characterization of Micro/Nanostructured Ceramic Device for Energy Conversion
… featuring radially well-aligned micro-channels open at the inner surface. A thin YSZ electrolyte and LSM electrode are then fabricated on the substrate. Upon reducing treatment, nickel nanoparticles are exsolved from LSTN grains and uniformly decorated onto grain surface. With CO/CO2 gas mixture …
-
Development of novel functional and sustainable materials for Vat-based 3D printing
… the high-resolution 3D printing of customized, open microfluidic structures in a size of 80 μm with residual functional groups is achieved. These functional groups at the intermediate state enable the immobilization of biomolecules as well as the adhesive-free dry bonding. The 3D printed open …