Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 200 for “"OpenSees"”.

  1. Reliability-based structural design optimization for nonlinear structures in OpenSees

    … optimization approaches are implemented in OpenSees, a modern and comprehensive finite element software that has recently been extended with reliability and response sensitivity analysis capabilities. These new implementations enable reliability-based design optimization for comprehensive …

    ubc Repository record for Reliability-based structural design optimization for nonlinear structures in OpenSees (opens in a new tab) Download PDF for Reliability-based structural design optimization for nonlinear structures in OpenSees (opens in a new tab)

  2. Evaluation of an OpenSees Layered Shell Model for Simulating Flexure-Controlled Reinforced Concrete Walls

    … cloud-computing resources to calibrate an OpenSees model for simulating the earthquake response of planar walls. Jupyter notebooks were used to create and run OpenSees models of individual walls included in a published experimental dataset, and Jupyter notebooks were used to define error …

    washington Repository record for Evaluation of an OpenSees Layered Shell Model for Simulating Flexure-Controlled Reinforced Concrete Walls (opens in a new tab)

  3. Evaluation of Site Response Analysis Programs in Predicting Nonlinear Soil Response Using Geotechnical Downhole Array Data

    … commonly used software packages, DEEPSOIL and OPENSEES, in estimating the seismic response of the soil has been conducted. OPENSEES is a finite element based program which is capable of 3D modeling meanwhile DEEPSOIL is a finite different based software which can only perform one dimensional …

    unr Repository record for Evaluation of Site Response Analysis Programs in Predicting Nonlinear Soil Response Using Geotechnical Downhole Array Data (opens in a new tab)

  4. Seismic Response Analysis of a Full-Scale Base-Isolated Structure via Measurements and Modeling

    … by implementing advanced numerical modeling in OpenSees for direct analysis of soil-structure interaction.</p><p>This dissertation presents a novel method for recovering force-displacement relations within the isolators of building structures with unknown nonlinearities from sparse …

    duke Repository record for Seismic Response Analysis of a Full-Scale Base-Isolated Structure via Measurements and Modeling (opens in a new tab)

  5. Numerical study of pin-supported cross-laminated timber (CLT) shear wall system equipped with low-yield steel dampers

    … shear wall system have been developed using both OpenSees Navigator and ABAQUS software. Models of low-yield steel damper systems were calibrated using available experimental results. With the rigid floor/roof assumption, a simplified OpenSees model of the CLT shear wall system was demonstrated to …

    ubc Repository record for Numerical study of pin-supported cross-laminated timber (CLT) shear wall system equipped with low-yield steel dampers (opens in a new tab) Download PDF for Numerical study of pin-supported cross-laminated timber (CLT) shear wall system equipped with low-yield steel dampers (opens in a new tab)

  6. Reduced component model for double-angle shear connections considering the contribution of the concrete slab for cyclic analysis of steel structures

    … and to create a simplified component model in OpenSees to simulate their response. A component model for bare steel and composite double-angle web shear connections is proposed based on components developed in previous studies. Additionally, analysis work pertaining validation and response …

    texas Repository record for Reduced component model for double-angle shear connections considering the contribution of the concrete slab for cyclic analysis of steel structures (opens in a new tab)

  7. Development of An Open-Source Methodology for Simulation of Civil Engineering Structures Subject to Multi-Hazards

    … constructed within the OpenFOAM toolbox and OpenSees framework, respectively. The capabilities of OpenFOAM and OpenSees, when combined, allow for the evaluation of nonlinear structural response to multi-hazard excitation. Communication between component analyses is established by the coupling …

    washington Repository record for Development of An Open-Source Methodology for Simulation of Civil Engineering Structures Subject to Multi-Hazards (opens in a new tab)

  8. Implementation, Verification, Validation, and Application of Two Constitutive Models for Earthquake Engineering Applications

    … 2017, 2018), in the finite element platform OpenSees (OpenSees, 2007). These models are developed for earthquake engineering applications and can achieve reasonable approximations of desired behavior including pore pressure generation and dissipation, limiting strains, and cyclic mobility …

    washington Repository record for Implementation, Verification, Validation, and Application of Two Constitutive Models for Earthquake Engineering Applications (opens in a new tab)

  9. Multi-Model Structural Analysis

    … investigated through the comparison of various openSEES models. A series of models is created and the responses compared with each other as well as with a full scale shake table experiment. The openSEES models selected for comparison include two linear models, a nonlinear model using the Steel01 …

    south-carolina Repository record for Multi-Model Structural Analysis (opens in a new tab)

  10. Nonlinear analysis of T-shaped concrete walls subjected to multi-directional displacements

    … using the open source finite element package OpenSees. Both pre- and post-test analysis of the walls was done to understand the simulation capabilities, and improvements that are required to improve the simulation and prediction of the response of the structural walls.</p> <p>The OpenSees …

    iastate Repository record for Nonlinear analysis of T-shaped concrete walls subjected to multi-directional displacements (opens in a new tab)

  11. Development of an innovative modular steel truss system

    … conducted in conjunction with the Matlab and OpenSees. Space trusses are utilized to provide sufficient stiffness to support gravity, eliminate vertical deflection and transfer lateral force without significantly increasing floor depth. The buckling restrained braces (BRBs) in MBRBTMF are …

    ubc Repository record for Development of an innovative modular steel truss system (opens in a new tab) Download PDF for Development of an innovative modular steel truss system (opens in a new tab)

  12. Comparative response of mid-rise (9-story) based-isolated and conventional steel moment resisting frame buildings

    … the current building code standards (ASCE 2005). OpenSees and SAP 2000 were used to develop analytical models of the 9-story buildings for independent purposes. The SAP model was used primarily for model analysis and to perform a design check with standard response spectrum analysis procedures. …

    unr Repository record for Comparative response of mid-rise (9-story) based-isolated and conventional steel moment resisting frame buildings (opens in a new tab)

  13. Fragility Assessment of Steel Frames under Post-Earthquake Hazards

    … finite element modeling for seismic loading in OpenSees. However, the fire module relies exclusively on a distributed plasticity model to represent the temperature gradient across the section depth. Thus, the temperature-dependent distributed plasticity model has been used for PEF, although it …

    mcmaster Repository record for Fragility Assessment of Steel Frames under Post-Earthquake Hazards (opens in a new tab)

  14. Seismic performance quantification of reinforced concrete shear walls with high-strength materials in nuclear facilities: hybrid simulation testing and numerical modelling assessment

    … To perform this evaluation, a numerical OpenSees model is developed and experimentally validated using several walls with a wide range of design parameters and geometrical configurations, tested in previous experimental programs. Incremental dynamic analyses are then performed following …

    mcmaster Repository record for Seismic performance quantification of reinforced concrete shear walls with high-strength materials in nuclear facilities: hybrid simulation testing and numerical modelling assessment (opens in a new tab)

  15. Hybrid simulation and its application to the gravity load collapse of reinforced concrete frames

    … systems using the finite element software OpenSees, the software framework for hybrid simulation OpenFresco and an event-driven predictor-corrector scheme ensuring continuous testing. Geographically distributed hybrid simulation is introduced and distributed tests performed between the …

    ubc Repository record for Hybrid simulation and its application to the gravity load collapse of reinforced concrete frames (opens in a new tab) Download PDF for Hybrid simulation and its application to the gravity load collapse of reinforced concrete frames (opens in a new tab)

  16. Ground Movements and Nonlinear-Inelastic Response of Buildings Induced by Excavations in Glacial Clay Deposits

    … finite element models built in PLAXIS2D and OpenSees. PLAXIS2D was used to simulate the performance of an urban cofferdam excavation braced with a concrete bracing system. Measured ground movements were compared with the computed response, and the influence of the temperature, installation, …

    ucf Repository record for Ground Movements and Nonlinear-Inelastic Response of Buildings Induced by Excavations in Glacial Clay Deposits (opens in a new tab)

  17. A study of the behavior of veneer wall systems in medium rise buildings under seismic loads.

    … ground motions, using the state of the art OpenSees framework. The preliminary designs of the building frames were performed on the STAAD.Pro software, according to American Building Code provisions. The member sizes were selected by the software using its inbuilt design algorithms, so as to …

    louisville Repository record for A study of the behavior of veneer wall systems in medium rise buildings under seismic loads. (opens in a new tab)

  18. Effect of Skew on Seismic Performance of Bridges with Seat-Type Abutments

    … a detailed 3D analytical model developed in OpenSees, that considers pounding and friction effects at the abutment-deck interface. During these experiments, excessive in-plane rotation of the deck was observed after the expansion gap closed and the deck impacted the abutment. This rotation …

    unr Repository record for Effect of Skew on Seismic Performance of Bridges with Seat-Type Abutments (opens in a new tab)

  19. Numerical Modelling of Exposed Base Plate Connections and Their Influence on System-level Seismic Response

    … the proposed modelling approach in ABAQUS and OpenSees, it is compared with available experimental data in the literature. The results show that both developed modelling approaches can capture the nonlinear cyclic response of exposed column base connections and that the simplified model is …

    queens Repository record for Numerical Modelling of Exposed Base Plate Connections and Their Influence on System-level Seismic Response (opens in a new tab)

Page 1 of 10