Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 212 for “"Operating speed"”.

  1. Operating Speed Models for Low Speed Urban Enviroments based on In-Vehcile GPS

    Low speed urban streets are designed to provide both access and mobility, and accommodate multiple road users, such as bicyclists and pedestrians. However, speeds on these facilities often exceed the intended operating speeds as well as their design speeds. Several studies have indicated that the …

    gatech Repository record for Operating Speed Models for Low Speed Urban Enviroments based on In-Vehcile GPS (opens in a new tab)

  2. OPERATING SPEED PREDICTION MODELS FOR HORIZONTAL CURVES ON RURAL FOUR-LANE NON-FREEWAY HIGHWAYS

    One of the significant weaknesses of the design speed concept is that it uses the design speed of the most restrictive geometric element as the design speed of the entire road. This leads to potential inconsistencies among successive sections of a road. Previous studies documented that a uniform …

    uky-thes Repository record for OPERATING SPEED PREDICTION MODELS FOR HORIZONTAL CURVES ON RURAL FOUR-LANE NON-FREEWAY HIGHWAYS (opens in a new tab)

  3. Understanding Operating Speed Variation of Multilane Highways with New Access Density Definition and Simulation Outputs

    Traffic speed is generally considered a core issue in roadway safety. Previous studies show that faster travel is not necessarily associated with an increased risk of being involved in a crash. When vehicles travel at the same speed in the same direction (even high speeds, as on interstates), they …

    usf Repository record for Understanding Operating Speed Variation of Multilane Highways with New Access Density Definition and Simulation Outputs (opens in a new tab)

  4. DEVELOPMENT AND CALIBRATION OF A GLOBAL GEOMETRIC DESIGN CONSISTENCY MODEL FOR TWO-LANE RURAL HIGHWAYS, BASED ON THE USE OF CONTINUOUS OPERATING SPEED PROFILES

    … crash risk potential. This PhD presents a new, operating speed-based global consistency model. It is based on the analysis of more than 150 two-lane rural homogeneous road segments of the Valencian Region (Spain). The final consistency parameter was selected as the combination of operational …

    upv Repository record for DEVELOPMENT AND CALIBRATION OF A GLOBAL GEOMETRIC DESIGN CONSISTENCY MODEL FOR TWO-LANE RURAL HIGHWAYS, BASED ON THE USE OF CONTINUOUS OPERATING SPEED PROFILES (opens in a new tab)

  5. Development of an Operating Speed Prediction Model and Investigation of the Relationship between Speed Variability and Crash Frequency: A Case Study of Residential Urban Streets in the City of Saskatoon

    … interest in highway engineering: predicting operating speeds and investigating the relationship between speed and safety for urban roads. Speed is a foundational parameter in highway safety, highway design and operational analysis. However, appropriate speed levels to meet satisfactory …

    sask Repository record for Development of an Operating Speed Prediction Model and Investigation of the Relationship between Speed Variability and Crash Frequency: A Case Study of Residential Urban Streets in the City of Saskatoon (opens in a new tab)

  6. Experimental and Numerical Analysis of Rolling Dynamic Compaction

    … depth and it can be operated at a higher speed. Although RDC has been successfully applied to many construction projects, there is currently very limited understanding of the behaviour of soil beneath the ground during the RDC process. In addition, the relationships between soil response …

    adelaide Repository record for Experimental and Numerical Analysis of Rolling Dynamic Compaction (opens in a new tab)

  7. Safety and Operations of Urban Arterials Incorporating the Context Classification System

    … and indicating the factors contributing to operating speed as well as non-motorist crashes. The analyses included tuning, testing, and comparing multiple parametric and machine learning models. First, a framework was proposed to estimate cycle-level turning movements' counts at signalized …

    ucf Repository record for Safety and Operations of Urban Arterials Incorporating the Context Classification System (opens in a new tab)

  8. Ελαχιστοποίηση απωλειών σύγχρονων κινητήρων με δρομέα έκτυπων πόλων

    … respectively. These values depend on the operating speed and the load torque. The proposed method is easily implemented on inverter fed, adjustable speed, motor drives. The efficiency improvement and the energy saving are considerable when the motor operates at light load. The Loss Model …

    greece Repository record for Ελαχιστοποίηση απωλειών σύγχρονων κινητήρων με δρομέα έκτυπων πόλων (opens in a new tab)

  9. MANUFACTURING OF A GAS FOIL BEARINGS FOR PALMED-SIZED TURBOMACHINERY

    … as loss factor, was conducted in which the rotor speed was varied and the responses were used to create cascade plots. Both the response and cascade plots are useful to determine the onset of instability and the maximum operating speed of the foil bearing manufactured through LIGA. The unique …

    tamu Repository record for MANUFACTURING OF A GAS FOIL BEARINGS FOR PALMED-SIZED TURBOMACHINERY (opens in a new tab)

  10. A PMAC motor drive with a minimum number of sensors / Li Ying.

    … estimation. This feature provides a wider operating speed range and robustness.

    adelaide Repository record for A PMAC motor drive with a minimum number of sensors / Li Ying. (opens in a new tab)

  11. A microprocessor-based experiment controller for the VPI & SU satellite tracking station

    … and reliability, generally at the expense of operating speed. This paper contains a detailed description of such a system, in which a Zilog Z80 microprocessor is used as the basis for an intelligent controlling interface between an assortment of experimental instruments and a PDP-11 …

    vt Repository record for A microprocessor-based experiment controller for the VPI & SU satellite tracking station (opens in a new tab)

  12. A single phase Al₀ 3Ga₀ 7As/GaAs heterojunction resistive-gate charge-coupled device

    … (HRGCCD) is described. The HRGCCD has a higher operating speed and a larger charge handling capacity in comparison to the conventional buried channel, resistive-gate GaAs charge-coupled device (GaAs RGCCD). The higher operating speed of HRGCCDs is due to the higher electron mobility and velocity …

    ubc Repository record for A single phase Al₀ 3Ga₀ 7As/GaAs heterojunction resistive-gate charge-coupled device (opens in a new tab) Download PDF for A single phase Al₀ 3Ga₀ 7As/GaAs heterojunction resistive-gate charge-coupled device (opens in a new tab)

  13. A Simulation Framework for Edge Lane Roads and Bicycle Shared Roadways

    … by motorists. They are commonly applied on lower speed corridors and can be used both where roadway width is limited and where agencies seek to manage vehicle speeds, clarify cyclist positioning, or improve shared roadway operations. The configuration provides visually designated space for …

    calpoly Repository record for A Simulation Framework for Edge Lane Roads and Bicycle Shared Roadways (opens in a new tab)

  14. Advanced Flux-Weakening Control Methods for Interior Permanent Magnet Synchronous Motors with Torque Performance Improvement

    … is adjusted based on the torque reference, operating speed, and modulation index. Two voltage feedback paths are established and chosen based on the torque reference and operating speed. The stator resistance and nonlinear inductance characteristics are constructed based on the experimental …

    mcmaster Repository record for Advanced Flux-Weakening Control Methods for Interior Permanent Magnet Synchronous Motors with Torque Performance Improvement (opens in a new tab)

  15. High-Speed, High-Specific Power Electric Machine for Aerospace Propulsion: Design, Optimization and Technology Demonstration

    … PMSM with a 36/6 slot-pole combination and an operating speed of 20000 rpm. Recognizing motor design's iterative and computationally intensive nature, this work proposes a multi-objective optimization strategy incorporating a neural network-based surrogate model and a genetic algorithm. This …

    mcmaster Repository record for High-Speed, High-Specific Power Electric Machine for Aerospace Propulsion: Design, Optimization and Technology Demonstration (opens in a new tab)

  16. Soil forces on deep tillage tools

    … fields at a working depth of 18 cm and at three operating speeds. The tools included four cutting edges: flat, 90°, 40°, and elliptical with rake angles of 20° and 33°. Draft, vertical, and side forces were measured using six loadcells in a three directional arrangement such that two loadcells …

    sask Repository record for Soil forces on deep tillage tools (opens in a new tab)

  17. Optimal train control on various track alignments considering speed and schedule adherence constraints

    … subject to allowable travel time, maximum operating speed, and maximum acceleration/deceleration rates. The research problem is structured into four cases which consist of the combinations of track alignments (e.g., single vertical alignment and mixed vertical alignment) and the variation …

    njit Repository record for Optimal train control on various track alignments considering speed and schedule adherence constraints (opens in a new tab)

  18. Development and Evaluation of an Inertial Based Pavement Roughness Measuring System

    … and after new method analysis), impact of operating speed and sample interval, correlativity and etc. IRI from these devices were analyzed to evaluate the correlativity between these devices. Some regression models were developed in this research. Test results show that the new method can …

    usf Repository record for Development and Evaluation of an Inertial Based Pavement Roughness Measuring System (opens in a new tab)

Page 1 of 11