Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 69 for “"Operational Modal Analysis"”.

  1. Operational modal analysis applied to centrifugal compressors

    … of critical speeds with low damping inside the operational speed range at full or partial load conditions. The present work examines Operational Modal Analysis methods applied to centrifugal compressors, as an alternative to the methods applied to conventional stability tests. Five OMA methods …

    brazil-uerj Repository record for Operational modal analysis applied to centrifugal compressors (opens in a new tab)

  2. Operational modal analysis for chatter prediction in milling

    … sampling of stable process vibrations with Operational Modal Analysis to estimate the Floquet multipliers of the delayed linear time-periodic dynamics in milling, all from the natural process vibrations without external excitation. The identified multipliers quantify vibration stability, …

    uvic Repository record for Operational modal analysis for chatter prediction in milling (opens in a new tab)

  3. Predicting regenerative chatter in turning using operational modal analysis

    … vibrations during turning operations using Operational Modal Analysis (OMA). The numerical simulations and experimental results presented in this thesis confirm the possibility of using Operational Modal Analysis as an online chatter prediction method during stable machining operations.

    uvic Repository record for Predicting regenerative chatter in turning using operational modal analysis (opens in a new tab)

  4. Operational modal analysis and model updating with a cyclostationary input

    … thesis addresses the problem of identifying the modal properties of a system based only on measurements of the system responses. This situation is frequently encountered in structural dynamics and is particularly relevant for systems where the in-service excitation is not artificially …

    unsw Repository record for Operational modal analysis and model updating with a cyclostationary input (opens in a new tab)

  5. Automatic operational modal analysis: challenges and applications to historic structures and infrastructures

    … the work turns around the capability to automate Operational Modal Analysis methods for permanent dynamic monitoring systems. In general, the application of OMA methods requires an experienced engineer in experimental dynamics and modal analysis; in addition, a lot of time is usually spent in …

    cagliari Repository record for Automatic operational modal analysis: challenges and applications to historic structures and infrastructures (opens in a new tab)

  6. Novel Probabilistic and Bayesian Approaches to Uncertainty Quantification for Operational Modal Analysis

    The analysis of dynamic systems is of fundamental importance to countless engineering applications. The default way to analyse linear structural dynamic systems is through a methodology known as modal analysis. Since its introduction over 50 years ago, experimental modal analysis (EMA) has …

    whiterose Download PDF for Novel Probabilistic and Bayesian Approaches to Uncertainty Quantification for Operational Modal Analysis (opens in a new tab)

  7. Operational Modal Analysis of Rolling Tire: A Tire Cavity Accelerometer Mediated Approach

    … date, there is no direct procedure available for modal analysis of rolling tires with tread patterns under realistic operating conditions. The present start-of-art laser vibrometer based non-contact measurements are limited to tread vibration measurement of smooth tires only in a lab environment. …

    vt Repository record for Operational Modal Analysis of Rolling Tire: A Tire Cavity Accelerometer Mediated Approach (opens in a new tab)

  8. Operational modal analysis, model updating, and seismic analysis of a cable-stayed bridge

    … the effects of model updating using a seismic analysis. The dynamic behaviour of the Port Mann Bridge’s main span is studied using experimental data from field ambient vibration tests and from a structural health monitoring network. A finite element model is created by importing a version of …

    ubc Repository record for Operational modal analysis, model updating, and seismic analysis of a cable-stayed bridge (opens in a new tab) Download PDF for Operational modal analysis, model updating, and seismic analysis of a cable-stayed bridge (opens in a new tab)

  9. Operational modal analysis of a rotating cantilever beam using high-speed digital image correlation

    A novel procedure to perform an operational modal analysis on a rotating cantilever beam is described. This procedure uses Digital Image Correlation (DIC) to measure the deformation of a beam from images captured with a pair of high-speed digital cameras. Modal parameters including natural …

    texas Repository record for Operational modal analysis of a rotating cantilever beam using high-speed digital image correlation (opens in a new tab)

  10. Operational modal analysis, model updating and response prediction bridge under the 2014 Napa Earthquake

    … The work reported here includes an in-depth analysis of the behavior of the Vallejo- Hwy 37 Napa River Bridge during the 2014 California, Napa earthquake (M 6.0). The bridge located in Vallejo California connects Sears Point Road and Mare Island to Vallejo. It was built in 1967. The bridge …

    ubc Repository record for Operational modal analysis, model updating and response prediction bridge under the 2014 Napa Earthquake (opens in a new tab) Download PDF for Operational modal analysis, model updating and response prediction bridge under the 2014 Napa Earthquake (opens in a new tab)

  11. Operational modal analysis of flexible robots and contact force estimation for robotic grinding applications

    … end-effector contact force estimation and operational modal analysis are important aspects must be considered in robotic grinding. As can be seen from the title of this thesis, the work is concerned with two aspects of robotics research. In the first one, special attention has been given to …

    ets-quebec Download PDF for Operational modal analysis of flexible robots and contact force estimation for robotic grinding applications (opens in a new tab)

  12. Structural health assessment of bridges by long-term vibration monitoring and automated operational modal analysis

    … and on the theoretical aspects such as advanced analysis and interpretation through improved system identification, automated operational modal analysis and long-term tracking of modal estimates which will lead to proper condition assessment. The Confederation Bridge's long-term remote vibration …

    carleton Repository record for Structural health assessment of bridges by long-term vibration monitoring and automated operational modal analysis (opens in a new tab)

  13. Removal of transfer function effects for gear condition monitoring using cepstrum-based operational modal analysis

    … to obtain more direct diagnostic information. Operational modal analysis (OMA) is capable of identifying the dynamic characteristics of a system from response measurements only. Cepstrum-based OMA can provide the relative scaling between adjacent modes, which is an advantage compared to other …

    unsw Repository record for Removal of transfer function effects for gear condition monitoring using cepstrum-based operational modal analysis (opens in a new tab)

  14. Full Field Reconstruction Enhanced With Operational Modal Analysis and Compressed Sensing for General Dynamic Loading

    … structure. Among all the analytical methods, the modal expansion method is computationally efficient and thus more suitable for real time expansion of measured data. In this method, the full-field response is approximated by the linear combination of mode shapes. In previous studies, the modal …

    vt Repository record for Full Field Reconstruction Enhanced With Operational Modal Analysis and Compressed Sensing for General Dynamic Loading (opens in a new tab)

  15. Multiple-Input Multiple-Output (MIMO) blind system identification for operational modal analysis using the Mean Differential Cepstrum (MDC)

    The convenience of Operational Modal Analysis (OMA), over conventional Experimental Modal Analysis (EMA), has seen to its increasing popularity over the last decade for the purpose of evaluating dynamic properties of structures. OMA features an advantage of requiring only output information, which …

    unsw Repository record for Multiple-Input Multiple-Output (MIMO) blind system identification for operational modal analysis using the Mean Differential Cepstrum (MDC) (opens in a new tab)

  16. SMART AERODYNAMIC CONTROL DEVICES DESIGN AND VIBRATION REDUCTION ANALYSIS FOR WIND TURBINE BLADES

    … on the flap under the wind turbine’s normal operational conditions, the required energy output from the actuators was calculated. To meet the energy requirements, the configuration of actuator array was determined. Amplification systems were designed to enhance the displacement output at the …

    mtu Repository record for SMART AERODYNAMIC CONTROL DEVICES DESIGN AND VIBRATION REDUCTION ANALYSIS FOR WIND TURBINE BLADES (opens in a new tab)

  17. Ověřování věrohodnosti měřicí metody z oblasti modální analýzy

    … MATLAB, a dále pomocí komerčního softwaru PULSE Operational Modal Analysis. Správnost získaných výsledků byla ověřena výpočtovým modelováním a experimentální modální analýzou.

    brno-tech Repository record for Ověřování věrohodnosti měřicí metody z oblasti modální analýzy (opens in a new tab)

  18. Identification of in-process machine tool dynamics

    … of in-process machine tool dynamics using operational modal analysis and machine learning principles. The process-dependent force coefficients which characterize the milling force model are also identified. The in-process spindle mode is identified using a modification of operational modal …

    ubc Repository record for Identification of in-process machine tool dynamics (opens in a new tab) Download PDF for Identification of in-process machine tool dynamics (opens in a new tab)

  19. Structural dynamics analysis in the presence of unmeasured excitations

    Methods for comprehensive structural dynamic analysis generally employ input-output modal analysis with a mathematical model of structural vibration using excitation and response data. Recently operational modal analysis methods using only vibration response data have been developed. In this …

    unsw Repository record for Structural dynamics analysis in the presence of unmeasured excitations (opens in a new tab)

Page 1 of 4