Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 83 for “"Operational bandwidth"”.

  1. Design of Reconfigurable Multiband Low Noise Amplifiers for Software Defined Radios

    … increased NF, degraded linearity and reduced operational bandwidth. To fill these research gaps, firstly we propose a step-wise impedance scaling method to design concurrent multiband matching networks for LNAs. Subsequently, we design a dual band LNA (1.1GHz and 2.4GHz) that substantially …

    auckland-tech Repository record for Design of Reconfigurable Multiband Low Noise Amplifiers for Software Defined Radios (opens in a new tab)

  2. Design and analysis of super wideband microstrip antennas for parameter optimization

    … knowledge, the proposed antenna has the widest operational bandwidth of 196.42 GHz (2.38 GHz to 197.8 GHz) reported so far. The VSWR for this design is < 2 and the impedance bandwidth ratio (IBR) is 82.77:1, which is, to our best knowledge, also higher than any reported values. The antenna has a …

    missouri Repository record for Design and analysis of super wideband microstrip antennas for parameter optimization (opens in a new tab)

  3. The Study and Implementation of Electrically Small Printed Antennas for an Integrated Transceiver Design

    … provides the best compromise among volume, bandwidth and efficiency. For experimentation purposes, three types of meandering-monopole antenna are examined resulting in five antennas for the study. The performance of each antenna under study is evaluated based upon return loss, operational …

    ku Repository record for The Study and Implementation of Electrically Small Printed Antennas for an Integrated Transceiver Design (opens in a new tab)

  4. Sinusoidal anti-coupling symmetric strip waveguides on a silicon-on-insulator platform

    … has an average crosstalk SR of 34.9 dB over an operational bandwidth of 35 nm. The PBS has a small coupler length of 8.55 μm, has average extinction ratios of 12.0 dB for the TE mode and of 20.1 dB for the TM mode, and has average polarization isolations of 20.6 dB for the through port (the TE …

    ubc Repository record for Sinusoidal anti-coupling symmetric strip waveguides on a silicon-on-insulator platform (opens in a new tab) Download PDF for Sinusoidal anti-coupling symmetric strip waveguides on a silicon-on-insulator platform (opens in a new tab)

  5. Hybrid digital control of piezoelectric actuators.

    … have high stiffness, provide excellent operating bandwidth and high force output. Consequently they have been widely used in many applications ranging from scanning tunnelling microscopes (STM) to vibration cancellation in disk drives. However, piezoelectric actuators are nonlinear in nature and …

    adelaide Repository record for Hybrid digital control of piezoelectric actuators. (opens in a new tab)

  6. Design and optimisation of constrained electromagnetic energy harvesting devices

    … in real conditions. In order to increase the operational bandwidth of rotational energy harvesters, subjected to time-varying frequency vibrations, a variable moment of inertia mechanism is proposed to adaptively tune the resonance frequency of harvester to match the excitation frequency. …

    soton Download PDF for Design and optimisation of constrained electromagnetic energy harvesting devices (opens in a new tab)

  7. Information theoretic analysis design of antenna systems

    … The development shows that tight MC widens the operational bandwidth of antenna arrays thereby unleashing a missing MIMO gain that was coined ``bandwidth gain''. For practical implementation of MIMO arrays, I demonstrate a capacity-based design of tightly-coupled connected array …

    manitoba Repository record for Information theoretic analysis design of antenna systems (opens in a new tab)

  8. Design And Characterization Of Multi-Layer Coplanar Waveguid Baluns And Inductors

    … good in the frequency range 4-8 GHz with a 4 GHz operational bandwidth (OBW) and 5o phase difference and 0.5 dB amplitude imbalance. The larger balun (5.6mm x 3.0 mm) with minimum spacing of 100mm works well in the frequency range 2-4 GHz with a 2 GHz operational bandwidth (OBW) and 10o phase …

    usf Repository record for Design And Characterization Of Multi-Layer Coplanar Waveguid Baluns And Inductors (opens in a new tab)

  9. Design of millimetre-wave antennas on LTCC and PCB technologies for beam-steering applications

    An increasing need for wider bandwidths and higher data rates makes the use of millimetre-wave frequencies (30–300 GHz) attractive for the wireless communications applications. At millimetre-wave frequencies, directive antennas with a moderate or high antenna gain are usually needed to compensate …

    aalto Repository record for Design of millimetre-wave antennas on LTCC and PCB technologies for beam-steering applications (opens in a new tab)

  10. State estimation of International Space Station centrifuge rotor with incomplete knowledge of disturbance inputs

    … testing goes on to show that increased estimator operational bandwidth can be achieved through the expansion of the disturbance model within the filter dynamics. In addition, Monte Carlo analysis shows the varying levels of robustness against defined plant/filter uncertainty variations.

    rice Repository record for State estimation of International Space Station centrifuge rotor with incomplete knowledge of disturbance inputs (opens in a new tab)

  11. Design and Characterization of RFID Modules in Multilayer Configurations

    … profile and especially small size whereas the bandwidth requirement (few kilohertz to megahertz) is less critical. In this document, methods to reduce tag size, the performance optimization of the tag by using novel antenna matching techniques for increased operational bandwidth and …

    gatech Repository record for Design and Characterization of RFID Modules in Multilayer Configurations (opens in a new tab)

  12. Direct and inverse design of microstructured optical fibres

    … for fabricating fibres with the widest possible operational bandwidth possible are developed and presented.

    soton Download PDF for Direct and inverse design of microstructured optical fibres (opens in a new tab)

  13. Integrated three-axis accelerometers with nanometer scale capacitive gaps and signal conditioning interface IC

    … coupling that enables improved operational bandwidth while achieving low-noise without altering device geometry. Furthermore, the use of nano-gap enables adjustment of air-damping so that the quasi-static (i.e. non-resonant) accelerometers can be operated in low-pressure level …

    gatech Repository record for Integrated three-axis accelerometers with nanometer scale capacitive gaps and signal conditioning interface IC (opens in a new tab)

  14. Benchmarking Test-Time DNN Adaptation at Edge with Compute-In-Memory

    … for its computational efficacy and superior operational bandwidth. Additionally, emerging lightweight unsupervised DNN adaptation techniques during test-time have showcased promising results in enhancing model accuracy for data with noise. This paper pioneers a holistic benchmarking …

    gatech Repository record for Benchmarking Test-Time DNN Adaptation at Edge with Compute-In-Memory (opens in a new tab)

  15. Wideband active MMIC baluns -concepts and design

    … circuits that can provide signal gain and a wide operational bandwidth. This work investigates three active balun designs operating between 2-18 GHz in 0.25 μm GaAs technology. The results are obtained from simulations in Keysight Advanced Design System using the UMS PH25-20 v.1.3.1 process design …

    chalmers Repository record for Wideband active MMIC baluns -concepts and design (opens in a new tab)

  16. Sensor UHF elíptico para detecção de descargas parciais

    … the insertion of the FSSs did not impact the operational bandwidth of the antenna, which comprises 100% of the characteristic frequency range, of the PD activity (300 – 1500 MHz). The insertion of the FSSs resulted in an average gain of 4 dBi, concerning the isolated antenna, increasing the …

    brazil-ufrn Repository record for Sensor UHF elíptico para detecção de descargas parciais (opens in a new tab)

  17. Passive Wireless Saw Sensors With New And Novel Reflector Structures Design And Applications

    … a constant Q for SAW transducers for a given operational bandwidth, independent of device and transducer embodiment. Results on these new NLR SAW structures and devices along with a new novel 915 MHz transceiver based on a software radio approach was designed, built, and analyzed. Passive …

    ucf Repository record for Passive Wireless Saw Sensors With New And Novel Reflector Structures Design And Applications (opens in a new tab)

  18. Design and Application of Anti-Symmetric Grating for Optical Communication Systems

    … without mode conversion. In addition, the operational bandwidth and versatility are enhanced while keeping the compactness and simplicity of the devices.In this work, the AWBG concept is experimentally demonstrated using several devices: an optical add/drop multiplexer based on AWBG, …

    arizona-thes Repository record for Design and Application of Anti-Symmetric Grating for Optical Communication Systems (opens in a new tab)

  19. Ambient Vibration Energy Harvesting

    … power consumption in small-scaled and remotely operational electronic components. For the past ten years, there has been many research works in vibration-based energy harvesting, i.e., converting ambient vibration sources into electrical energy via different transduction methods. In dealing with …

    adelaide Repository record for Ambient Vibration Energy Harvesting (opens in a new tab)

  20. Measurement techniques of scattering parameters based on six-port technology for microwave applications

    … Resonator (SIR) is introduced to improve its operational bandwidth and performance compared to the reported ring structure. A comparative study between the designed device and the previously reported ring power divider is conducted. The electromagnetic (EM) simulated results show that the …

    ets-quebec Download PDF for Measurement techniques of scattering parameters based on six-port technology for microwave applications (opens in a new tab)

Page 1 of 5