Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 48 for “"Optic fiber"”.

  1. An optic fiber sensor for partial discharge acoustic detection

    … are consistent with theoretical expectations. Fiber optic-based sensors have been shown to be attractive devices for PD detection because of a number of inherent advantages including small size, high sensitivity, electrical nonconductivity, and immunity to electromagnetic interference (EMI). A …

    njit Repository record for An optic fiber sensor for partial discharge acoustic detection (opens in a new tab)

  2. Thermo-fluid modeling and robust control of modern optic fiber drawing processes

    … developed for the design and control of a modern optic fiber drawing process. Although modeling of the fiber drawing process has been of interest for the past three decades, most of the previous studies were limited to low draw speeds and small preforms. Large preforms drawn at high speeds have …

    gatech Repository record for Thermo-fluid modeling and robust control of modern optic fiber drawing processes (opens in a new tab)

  3. Evaluation and Quantification of Optic Fiber Distributed Sensor Response in Air and Water Environments

    … dense experimental results for comparison. Optic fiber distributed sensors can provide the dense and accurate data desired. While this sensing technology is mature, the responses of these sensors need to be fully characterized for all experimental conditions. This study performed multiple …

    tamu Repository record for Evaluation and Quantification of Optic Fiber Distributed Sensor Response in Air and Water Environments (opens in a new tab)

  4. Φωτοδυναμική θεραπεία ακτινωτού σώματος με verteporfin: πειραματική και κλινική μελέτη

    … due to progressive irreversible loss of optic nerve fibers (23,24). The main risk factor of glaucoma is the intraocular pressure (IOP) and all current anti-glaucoma treatments aim to its reduction (19). Topical anti-glaucoma medications and current surgical treatments, cannot always …

    greece Repository record for Φωτοδυναμική θεραπεία ακτινωτού σώματος με verteporfin: πειραματική και κλινική μελέτη (opens in a new tab)

  5. Applications of random matrix theory in wireless and fiber optical channels

    … performance of modern communication links both fiber opticaland wireless. Therefore, we had to work on different channel models which describe thephysics governing the various connections, by using the assumption of large systemsand hence utilizing the approximations provided by the random …

    greece Repository record for Applications of random matrix theory in wireless and fiber optical channels (opens in a new tab)

  6. Solar power systems for 3D printing on lunar surface using In Situ Resources Utilization

    … lens will concentrate the radiation onto an optical waveguide system. The design is based on fused deposition modeling and selective laser melting techniques. Electronic components like Arduino and RepRap Arduino Mega Polulu Shield are utilized to control the 3D printing machine. The distinct …

    carleton Repository record for Solar power systems for 3D printing on lunar surface using In Situ Resources Utilization (opens in a new tab)

  7. Equalização neural aplicada a sistemas com modulação bidimensional em fibra óptica

    Nowadays, optic fiber is one of the most used communication methods, mainly due to the fact that the data transmission rates of those systems exceed all of the other means of digital communication. Despite the great advantage, there are problems that prevent full utilization of the optical channel: …

    brazil-ufrn Repository record for Equalização neural aplicada a sistemas com modulação bidimensional em fibra óptica (opens in a new tab)

  8. Optimization of Luminescent Metal-Organic Compounds for Oxygen Sensing Applications

    … applications. Recent developments to optic fiber and waveguide technology have made luminescence-based molecular sensors more competitive than traditional sensing methods due to their easy modes of detection and portability. Several transition metal complexes have been investigated for …

    queens Repository record for Optimization of Luminescent Metal-Organic Compounds for Oxygen Sensing Applications (opens in a new tab)

  9. A fiber optic pressure transducer.

    … statically tested. The transducer used a glass fiber bundle 0.109" in diameter to transmit and receive reflected light from a pressure diaphragm. The amount of light returned to a photosensor was dependent upon the diaphragm shape and relative position from the optic fiber bundle. The response …

    nps Repository record for A fiber optic pressure transducer. (opens in a new tab)

  10. Display to Camera Calibration Techniques

    In today's technology, with digitally controlled optic sensing devices, there exists a need for a fast and accurate calibration procedure. Typical display devices and optic fiber bundles are plagued with inaccuracies. There are many sources of error such as delay, time constants, pixel distortion, …

    ucf Repository record for Display to Camera Calibration Techniques (opens in a new tab)

  11. HNK-1 Immunoreactivity in <i>In Situ</i> Adult Teleost Retina

    … at the outer limiting membrane, throughout the optic fiber layer, and in tubular processes surrounding cone horizontal cells in the inner nuclear layer. A differential fixation scheme suggested that the Müller cell microvillar and tubular process HNK-1 immunoreactivity was due primarily to …

    utahstate Repository record for HNK-1 Immunoreactivity in <i>In Situ</i> Adult Teleost Retina (opens in a new tab)

  12. Precise passive alignment between single-mode fibers and grating couplers using 3D nanoprinted ferrules

    … between integrated waveguides and external optic fiber waveguides is one of the major potential sources of inefficiency in these systems. For insertion loss to be minimized, physical alignment between waveguide modes must be highly precise. One way to achieve this is through active …

    gatech Repository record for Precise passive alignment between single-mode fibers and grating couplers using 3D nanoprinted ferrules (opens in a new tab)

  13. Fabrication of integrated optic sensor to monitor pollutant concentration in effluents

    … attempt has been made to fabricate an integrated optic sensor to monitor pollutant concentration in effluents. Optic fiber has to be coupled to the waveguide in order to send light through the waveguide. In order to facilitate the easy coupling of the fiber to the waveguide, V-grooves were formed …

    njit Repository record for Fabrication of integrated optic sensor to monitor pollutant concentration in effluents (opens in a new tab)

  14. Structural Health Monitoring of Concrete Elements Using Deep Machine Learning

    … the present study uses a distributed optic fiber system to monitor the strain distribution along steel reinforcing bars. The preliminary results of the study indicate that a semi-supervised Deep Autoencoder algorithm (DAE) can successfully quantify the damage attributable to transverse …

    chalmers Repository record for Structural Health Monitoring of Concrete Elements Using Deep Machine Learning (opens in a new tab)

  15. Desenvolvimento de um protocolo de comunicação para automação de subestações móveis via satélite

    … Center. Generally energy companies uses radio or optic fiber, depending of distances and infrastructure of each situation. This rule applies to common substations. Mobile substations are a particular case, therefore they are conceived for use at provisional situations, emergencies, preventive or …

    brazil-ufrn Repository record for Desenvolvimento de um protocolo de comunicação para automação de subestações móveis via satélite (opens in a new tab)

  16. A precessing-coin-like rotary actuator for endoscopic multimodal imaging

    … an inclined disc rotor that serves as a distal optical scanner for endoscopic probes, enabling side-viewing endoscopy in luminal organs using different imaging/analytic modalities such as optical coherence tomography and Raman spectroscopy. This scanner uses the magnetic rotor designed to have a …

    ubc Repository record for A precessing-coin-like rotary actuator for endoscopic multimodal imaging (opens in a new tab) Download PDF for A precessing-coin-like rotary actuator for endoscopic multimodal imaging (opens in a new tab)

  17. Systematic Methodology for Enhanced Performance Prediction in Designing Large Active Phased Array Antennas for Satellite Communication

    … infrastructure, including base stations and optical fiber, faces challenges in remote or sparsely populated regions, such as mountainous terrain and oceans. Satellite communication (SATCOM) provides a complementary solution, enabling direct wireless links between users and satellite …

    waterloo Repository record for Systematic Methodology for Enhanced Performance Prediction in Designing Large Active Phased Array Antennas for Satellite Communication (opens in a new tab)

  18. Development of a Handheld Scanning Transducer Probe for Ultrasound Imaging

    … 3D ultrasound imaging. In addition, integrated optical light delivery with optic fiber cables was also investigated to extend its capability for photoacoustic imaging.

    tamu Repository record for Development of a Handheld Scanning Transducer Probe for Ultrasound Imaging (opens in a new tab)

  19. Evaluation of Post-tensioned Concrete Structures by Fiber Sensors: A study to develop sensor driven methods for evaluation of PRC elements, determine remaining prestressing force and assess key performance indicators.

    … two beams and im plement distributed optical fiber sensors (DOFS), key performance indicators of thepost-tensioned concrete specimens were monitored and evaluated. One specimenwas post-tensioned, while the other one served as a reference specimen, built the same apart from being …

    chalmers Repository record for Evaluation of Post-tensioned Concrete Structures by Fiber Sensors: A study to develop sensor driven methods for evaluation of PRC elements, determine remaining prestressing force and assess key performance indicators. (opens in a new tab)

Page 1 of 3