Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"Optical Strain"”.

  1. A Fibre Optical Strain Sensor

    Strain-sensing elements, fabricated in standard communications-grade single mode optical fibre, are increasingly being considered for application in structural health monitoring. The reason for this is the numerous advantages demonstrated by these devices compared with traditional indicators. This …

    plymouth Repository record for A Fibre Optical Strain Sensor (opens in a new tab)

  2. Microexpression Spotting in Video Using Optical Strain

    … pictures or extremely short videos; motion constrained; containing only a single microexpression and do not contain negative cases where microexpressions are absent. Only a few of these systems run in real time and even fewer have been tested on real life videos. This work proposes a novel …

    usf Repository record for Microexpression Spotting in Video Using Optical Strain (opens in a new tab)

  3. Next-Generation 2D Optical Strain Mapping: Strain-Sensing Smart Skin vs. Digital Image Correlation

    … local damage detection technique based on strain monitoring is important to ensure the safe functioning of these structures. Traditional techniques, such as resistance strain gauges and fiber Bragg grating (FBG) sensors, monitor only at discrete locations along a specific direction, and …

    rice Repository record for Next-Generation 2D Optical Strain Mapping: Strain-Sensing Smart Skin vs. Digital Image Correlation (opens in a new tab)

  4. Intermediate strain rate testing methodologies and full-field optical strain measurement techniques for composite materials characterisation

    Two optical full-field strain measurement techniques, Digital Image Correlation and the Grid Method, are applied to characterise the strain-rate dependent constitutive behaviour of composite materials. Optical strain measurement techniques based on full-field images are well established for …

    soton Download PDF for Intermediate strain rate testing methodologies and full-field optical strain measurement techniques for composite materials characterisation (opens in a new tab)

  5. Multi-Segment Waveguide Photodetectors For High Resolution Wavelength Monitoring Near 1.55 μm

    … (WDM) networks and fiber Bragg grating optical strain sensors. The presented technique utilizes in-line pairs of quantum well waveguide photodiodes fabricated in an InGaAsP /InP material system. The ratio of photocurrents produced between two consecutive waveguide detectors is taken as a …

    mcmaster Repository record for Multi-Segment Waveguide Photodetectors For High Resolution Wavelength Monitoring Near 1.55 μm (opens in a new tab)

  6. Novel Device to Quantify the Mechanical Properties of Electrospun Nanofibers

    … and constructed. To facilitate wet testing, optical strain recording, and cellular substrate testing, the novel device is capable of testing in a cell culture environment and can keep the electrospun fibers within the focal plane of an inverted microscope. To limit the complications arising …

    uab Repository record for Novel Device to Quantify the Mechanical Properties of Electrospun Nanofibers (opens in a new tab)

  7. A Novel Approach to Residual Stress Measurement

    … thesis provides an authentication of a novel strain measurement and residual stress calculation method. This method is heavily rooted in the fields of optical strain measurement and elementary solid mechanics. The types of measurements discussed involve using two specialty optical strain gages …

    south-carolina Repository record for A Novel Approach to Residual Stress Measurement (opens in a new tab)

  8. A thermodynamic relation for elastic solids.

    … utilizing a high temperature Tuckerman optical strain gage instead of the wire resistance strain gages employed by the earlier authors are described, and the difficulties encountered in their use are discussed.

    nps Repository record for A thermodynamic relation for elastic solids. (opens in a new tab)

  9. The Application of Distributed Optical Sensing to Measure the Full-Field Strain Response of Uniaxial Compression Test Specimens

    … component of UCS testing is measuring the strain response of test specimens. Conventionally, discrete strain measuring devices such as extensometers and/or electric foil strain gauges are used to measure the strain response at the mid-height of a specimen. However, this ultimately limits …

    queens Repository record for The Application of Distributed Optical Sensing to Measure the Full-Field Strain Response of Uniaxial Compression Test Specimens (opens in a new tab)

  10. A photoelastic investigation of thermal stresses.

    … in models fabricated of paraplex p-43. The optical and physical properties of this polyester resin were determined over the temperature range from room temperature to -40°F. Details of the techniques of casting and fabricating the models are given. Tuokerman optical strain gages were …

    nps Repository record for A photoelastic investigation of thermal stresses. (opens in a new tab)

  11. Novel experimental split-Hopkinson techniques for characterising strain rate effects and thermomechanical behaviour

    … to accurately characterise materials under high strain rate deformation, focusing particularly on thermomechanical effects. Conventional split Hopkinson methods have limitations when testing certain challenging materials such as low strength polymers, highly ductile metals, and materials with low …

    freiburg-diss Repository record for Novel experimental split-Hopkinson techniques for characterising strain rate effects and thermomechanical behaviour (opens in a new tab)

  12. Electrospun polycaprolactone scaffolds: mechanical properties, alignment quantification, and topology induced gene expression

    … nanofibers. Additionally, this device permitted optical strain recording to visualize the true strain along the length of an electrospun fiber. To investigate the importance of fiber alignment within electrospun scaffolds, a metric of fiber alignment first needed to be defined. Using an …

    uab Repository record for Electrospun polycaprolactone scaffolds: mechanical properties, alignment quantification, and topology induced gene expression (opens in a new tab)

  13. Modeling strain demands in longitudinal steel bars of concrete columns

    Fracture of longitudinal bars, due to high-strain low-cycle fatigue, is a common failure mode in seismically detailed reinforced concrete columns. The issue has recently attracted increased scrutiny due the national push to introduce high-strength reinforcing bars with yield strengths exceeding 80 …

    texas Repository record for Modeling strain demands in longitudinal steel bars of concrete columns (opens in a new tab)

  14. REDUCTION OF SKIN STRETCH INDUCED MOTION ARTIFACTS IN ELECTROCARDIOGRAM MONITORING USING ADAPTIVE FILTERING

    … artifacts are adaptively filtered by using skin strain as the reference signal. Skin strain is measured non-invasively using a light emitting diode (LED) and an optical sensor incorporated in an ECG electrode. The optical strain sensor is calibrated on animal skin samples and finally in-vivo, in …

    maryland Repository record for REDUCTION OF SKIN STRETCH INDUCED MOTION ARTIFACTS IN ELECTROCARDIOGRAM MONITORING USING ADAPTIVE FILTERING (opens in a new tab)

  15. Holographic laser ablation for nanopatterning

    … methods to produce nanophotonic devices for optical applications are costly and time consuming. Holographic direct laser interference patterning has helped to establish a strategy to rapidly create 1/2D nanopatterns from a variety of materials. A 640 nm × 640 nm pattern structure of Au-Ti was …

    birmingham Download PDF for Holographic laser ablation for nanopatterning (opens in a new tab)

  16. The application of distributed optical sensing for monitoring support in underground excavations

    … system. Within this context, a novel distributed optical strain sensing (DOS) technology has been implemented with rock bolt and forepole support elements. Unlike conventional, discrete strain measurement methods, the optical technology captures a distributed strain profile along the length of a …

    queens Repository record for The application of distributed optical sensing for monitoring support in underground excavations (opens in a new tab)

  17. SPR STUDIES OF N-HETEROCYCLIC CARBENE ADSORPTION KINETICS AND THE APPLICATION OF FIBER FABRY-PÉROT CAVITIES IN CHEMISTRY

    … on metal surfaces are a key component of many optical biosensors. The discovery that N-heterocyclic carbenes (NHC) form higher-stability SAMs has sparked a wave of exploratory studies and applications. There are still many unknowns surrounding NHC SAM formation, including the adsorption …

    queens Repository record for SPR STUDIES OF N-HETEROCYCLIC CARBENE ADSORPTION KINETICS AND THE APPLICATION OF FIBER FABRY-PÉROT CAVITIES IN CHEMISTRY (opens in a new tab)

  18. Deformation Behaviour of Woven Fibre Elastomeric Composites

    … Through the novel use of an advanced non-contact optical strain measurement technique, the hyperelastic material behaviour of the composite is investigated, and materials parameters reported for both the warp and the weft directions of reinforcement fibre alignment. To characterise the materials, …

    lancaster Download PDF for Deformation Behaviour of Woven Fibre Elastomeric Composites (opens in a new tab)

  19. Measurement and modelling of soil-structure interaction for open caisson shafts

    … force sensing is demonstrated, to enable optical strain measurement in the form of FBGs to be utilised. This is applied to create a sensor for detailed measurements of combined normal and frictional interface stresses in underground construction applications. Numerical simulation and …

    oxford Repository record for Measurement and modelling of soil-structure interaction for open caisson shafts (opens in a new tab)

  20. Development of Experimental Equipment and Identification Procedures for Sheet Metal Constitutive Laws

    … it includes the kinematics of a continuum body, strain and stress definitions, and a general elasto-plastic constitutive model description. This last point iscomplemented by the definition of anisotropy, as well as the description of some yield criteria and hardening laws.Next, Chapter 3 defines …

    liege Repository record for Development of Experimental Equipment and Identification Procedures for Sheet Metal Constitutive Laws (opens in a new tab) Download PDF for Development of Experimental Equipment and Identification Procedures for Sheet Metal Constitutive Laws (opens in a new tab)

Page 1 of 2