Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Optical films"”.
-
Sol-gel processing of RxY3-xAlyFe5-yO12 magneto-optical films
… of this research was the fabrication of thin films with magneto-optic (MO) properties. Accomplishment of this task was achieved via sol-gel processing of rare-earth and aluminum substituted yttrium-iron garnet (RxY3-xAlyFe5-yO12, R,Al:YIG), where R= Bi, Gd, Er, Ho. Detailed are the processing …
-
The study of photo-thermal lensing system and its applications
The high quality optical films in coatings with low absorption and good environmental stability are required for the development of high power lasers, because even slightest absorbing defects could lead to material's breakdown. Thus, a non-destructive absorption measurement is required to measure …
-
Regioselective Synthesis of Cellulose Esters
… derivatives have been widely used as coatings, optical films, fibers, molded objects, and matrices for controlled release. The properties of cellulose derivatives are not only affected by the degree of substitution, but also by the position of substitution. In order to establish the …
-
Power conversion and control for pulsed magnetron reactive sputtering
… This enables reactive co-sputtering of optical films when one target material is different than the other. Modeling shows that reactive gas partial pressure must be regulated, in addition to independent regulation of power to each target, in order to gain control over film composition. …
-
Defect and thickness inspection system for cast thin films using machine vision and full-field transmission densitometry
… areas is for 0.5-500 micrometer thick thin films, which are used for semiconductor wafers, amorphous photovoltaics, optical films, plastics, and organic and inorganic membranes. As a demonstration application, a prototype roll-feed imaging system has been designed to inspect high-temperature …
-
Laser direct-write of optical components prepared using the sol-gel process
… techniques for novel and cost effective optical components has focused on versatile new materials and low temperature processing. The laser direct-write of sol-gel optical films has the potential for addressing these two needs for the fabrication of photonic components for rapid …
-
MICROSTRUCTURE RELATED PROPERTIES OF OPTICAL THIN FILMS.
Both the optical and physical properties of thin film optical interference coatings depend upon the microstructure of the deposited films. This microstructure is strongly columnar with voids between the columns. Computer simulations of the film growth process indicate that the two most important …
-
LAMA-produced metal-on-oxide nanoparticles and films
… producing unique nanostructured particles and films are studied. The processing parameters are adjusted to create nanostructures that have potential for producing superior properties in two distinct technologically important areas – olefin gas separations and plasmonic films. Two extremes in …
-
The impact of the manufacturing process on the surface quality of polyethylene terephthalate optical film
… film can affect the surface quality of clear optical films. The purpose of gaining this understanding was to improve on existing cleaning methods and processing conditions that are currently insufficient and lead to a decrease in surface quality over time. Flexible electronics is a growing …
-
Bromide-free TEMPO-mediated oxidation of cellulose by hypochlorite - fundamental and practical aspects
… material for many applications such as electro-optical films, microelectronics, gas-barrier films, cosmetics, flame-resistant materials and other high-tech applications. The drawback in the traditional procedure, which is effective enough for industrial purposes, is the use of bromide in high …
-
THE ION-ASSISTED DEPOSITION OF OPTICAL THIN FILMS.
… microstructure of most thermally evaporated thin films detrimentally affects many of their properties through a reduction in packing density. In this work, we have investigated ion-assisted deposition as a means of disrupting this columnar growth for a number of coating materials. A Kaufman …
-
Optically transparent boron-doped diamond electrodes for chemical analysis
Thesis (Ph. D.)--Michigan State University. Department of Chemistry, 2004
-
STRUCTURE-INDUCED OPTICAL ANISOTROPY IN THIN FILMS
… microstructure to polarization effects in thin films. The microstructure is pictured by a simple model as composed of identical columns with elliptical cross section elongated in a direction perpendicular to that of the vapor incidence. The asymmetry in columnar structure that results from …
-
Laser-induced desorption and damage of water- and heavy water-dosed optical thin films.
… Samples consisted of bulk-etched CaF₂ and optical thin-film coatings of CaF₂--undosed or H₂O/D₂O dosed--on a variety of substrates. Some analysis was performed on cleaved, single-crystal alkali halides. The focused laser spot size was 155 μm (l/e² diameter) for the HF laser and 138 μm (l/e² …
-
WAVEFRONT ERRORS PRODUCED BY MULTILAYER THIN-FILM OPTICAL COATINGS
… at least two requirements that are uncommon in optical engineering: the reflectance of such mirrors must be very high (> 0.999), and the level of aberrations introduced by the mirrors is desired to be very low, typically λ/50 peak at 3.8 μ. The first requirement can be met by using multilayer …
-
Optical thin films prepared by ion-assisted and ultrasound-assisted deposition.
Optical, electrical, and microstructural effects of Ar ion bombardment and Ar incorporation on thermally evaporated Ag and Al thin films were investigated. The results show that as the momentum supplied to the growing films by the bombarding Ar ions per arriving metal atom increases, refractive …
-
Modeling Of Liquid Crystal Display And Photonic Devices
… materials have been widely applied in electro-optical devices, among which display is the most successful playground and numerous new applications in photonic areas (such as laser beam steering devices) are also emerging. To well guide the device design for optimum performance, accurate …
-
Diamond optically transparent electrodes for use in IR transmission spectroelectrochemical measurements
Thesis (M.S.)--Michigan State University. Department of Chemistry, 2007
-
Optimal design problems in thin-film and diffractive optics
Optical components built from thin-film layered structures are technologically very important. Applications include but are not limited to energy conversion and conservation, data transmission and conversion, space technology, imaging and so on. In practice these structures are defined by various …
-
Development of a transmission spectroelectrochemical method with optically transparent diamond electrode for the study of redox proteins
Thesis (Ph. D.)--Michigan State University. Chemistry, 2009
Page 1 of 2