Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"Optical glass"”.

  1. Characterization of photoinduced gratings in optical glass fibers.

    … of photo-induced gratings in germania doped glass fibers were studied. Permanent phase gratings in a fiber core were fabricated by the mixing of two contra propagating waves. Experiments are described and results are presented which show that the strength of a photoinduced grating is strongly …

    arizona-thes Repository record for Characterization of photoinduced gratings in optical glass fibers. (opens in a new tab)

  2. The measurement of birefringence in optical glass by electronic means

    … indicating their limitations in respect to large optical glass blanks, and then explains in considerable detail the writers' new radiation method, which is free of many of these limitations. The procedure and theory of this new method are given here briefly. Procedure: A collimated beam of …

    bu Repository record for The measurement of birefringence in optical glass by electronic means (opens in a new tab)

  3. Fabrication and Characterization of new Magneto Optical Glass for magneto optical waveguide and sensing applications

    … is to fabricate and characterize new magneto-optical glasses in terms of thermal stability, mechanical property and Verdet constant for magneto-optical waveguide and sensing applications. Firstly, 3 heavy metal oxides magneto-optical (MO) glasses were fabricated and characterized including …

    poli-torino Repository record for Fabrication and Characterization of new Magneto Optical Glass for magneto optical waveguide and sensing applications (opens in a new tab)

  4. The effect of striae on image quality.

    Striae are defined as fine streaks in optical glass that have an index of refraction different from that of the surrounding glass mass. The formation of striae occurs during the melting process and is attributed to a number of causes. Striae in optical glass result in an angular deviation of the …

    bu Repository record for The effect of striae on image quality. (opens in a new tab)

  5. Turbulent flow through a rectangular channel

    … designed and constructed to facilitate these optical measurements. It had negligible vibration and flow oscillation. Its length was 200 channel heights, sufficient to produce fully developed turbulent flow. The optical system had a specially designed optical table and traverse; optical glass …

    uiuc Repository record for Turbulent flow through a rectangular channel (opens in a new tab)

  6. Non-Optical contact glass welding at different laser pulse durations /

    Ultrashort pulse laser welding of glass is particularly valuable for creating hermetic seals in various industries and has many advantages over traditional bonding methods. Welding glasses in optical contact produce high-strength seams, however, achieving consistent optical contact, especially over …

    vilnius Repository record for Non-Optical contact glass welding at different laser pulse durations / (opens in a new tab)

  7. Stress relaxation of glass using a parallel plate viscometer

    … is the traditional method for manufacturing optical glass lenses. However, for a few years now, precision glass molding has gained importance for its flexibility in manufacturing aspheric lenses. With this new method, glass viscoelasticity and more specifically stress relaxation are important …

    clemson Repository record for Stress relaxation of glass using a parallel plate viscometer (opens in a new tab)

  8. Fluidic Assisted Fabrication of Elastomer Optical Lenses Using Capillarity

    Traditional methods of optical glass-based lens fabrication require subtractive manufacturing, which leads to high loss of material and long cycle time. With polymeric lenses, however, additive manufacturing methods work very well and have advantages of shorter processing times, negligible material …

    houston Repository record for Fluidic Assisted Fabrication of Elastomer Optical Lenses Using Capillarity (opens in a new tab)

  9. Effects on pH, surfactant concentration, and surface type on the removal of an oil from a solid surface

    … Two surfaces were tested, stainless steel and optical glass. Greater displacement of the oil occurred when using the stainless steel surface than when using the glass surface. Increasing the concentration of surfactant from below the critical micelle concentration (CMC) to above the CMC while …

    ut-knoxville Repository record for Effects on pH, surfactant concentration, and surface type on the removal of an oil from a solid surface (opens in a new tab)

  10. Application of computed tomography for measuring three dimensional refractive index inhomogeneity

    Manufacturers of optical glass strive to make a product that is homogeneous, isotropic, and free of any bubbles or mechanical strain. Glass used in forming images is very good, but the process of mixing the constituent materials, and melting them into a glass is limited. The index of refraction …

    arizona-thes Repository record for Application of computed tomography for measuring three dimensional refractive index inhomogeneity (opens in a new tab)

  11. Metrology Of Volume Chirped Bragg Gratings Recorded In Photo-thermo-refractive Glass For Ultrashort Pulse Stretching And Compressing

    … (CBGs) recorded in photo-thermo-refractive (PTR) glass provide a very efficient and robust way to stretch and compress ultra-short laser pulses. These gratings offer the ability to stretch pulses from hundreds of femtoseconds, to the order of 1 ns and then recompress them. However, in order to …

    ucf Repository record for Metrology Of Volume Chirped Bragg Gratings Recorded In Photo-thermo-refractive Glass For Ultrashort Pulse Stretching And Compressing (opens in a new tab)

  12. Solid matrix Christiansen filters.

    … of other wavelengths. Unlike filters based on optical interference, the transmitted wavelength does not depend on the angle of light incidence on the filter. These filters have been fabricated with solid host matrices by mixing finely ground optical glass powders with pellets of optical grade …

    arizona-thes Repository record for Solid matrix Christiansen filters. (opens in a new tab)

  13. Nikon and the sponsorship of Japan’s optical industry by the Imperial Japanese Navy, 1923-1945

    This thesis examines the development of Japan's optical industry during the 1920s, 1930s, and through the immediate post-World War Two era, placing particular emphasis upon the support given to emergent optical firms by the Imperial Japanese Navy (IJN). The author seeks to trace IJN support for …

    ubc Repository record for Nikon and the sponsorship of Japan’s optical industry by the Imperial Japanese Navy, 1923-1945 (opens in a new tab) Download PDF for Nikon and the sponsorship of Japan’s optical industry by the Imperial Japanese Navy, 1923-1945 (opens in a new tab)

  14. Ultrashort Laser Pulse Interaction With Photo-thermo-refractive Glass

    Photo-thermo-refractive (PTR) glass is an ideal photosensitive material for recording phase volume holograms. It is a homogeneous multi-component silicate glass that demonstrates all the advantages of optical glass: thermal stability, high laser damage threshold, and a wide transparency range. …

    ucf Repository record for Ultrashort Laser Pulse Interaction With Photo-thermo-refractive Glass (opens in a new tab)

  15. Siloxane modified hybrid materials by the sol-gel process

    … stemmed from the desire to make materials for optical filters since a gradient of optical properties can be derived based on the composition and the initial reaction conditions. 29Si NMR studies were conducted to investigate the incorporation process which led to the conclusion that the PDMS …

    vt Repository record for Siloxane modified hybrid materials by the sol-gel process (opens in a new tab)

  16. Studies of methylene blue monomer-dimer reaction in super-cooled glycerol

    … TNM model is designed to model a liquid near the glass transition point. It also proved to be a good model for fitting the change in the spectrum of dyestuff in solution with an optical glass transition point well above the calorimetric glass transition point. In these studies a hysteresis was …

    ttu Repository record for Studies of methylene blue monomer-dimer reaction in super-cooled glycerol (opens in a new tab)

  17. Plonasluoksnių pramoninių optinių dangų gamyba ir jų fizikinių savybių tyrimas /

    … thesis investigates HfO₂ and SiO₂ thin-film optical coatings formed by the electron beam evaporation method and the relationship between their structural properties and residual stresses. The main problem analyzed in this work is the formation of residual stresses and their influence on the …

    vilnius Repository record for Plonasluoksnių pramoninių optinių dangų gamyba ir jų fizikinių savybių tyrimas / (opens in a new tab)

  18. Sub-paviršinių defektų vaizdinimas stikle panaudojant optinę mikroskopiją su lazeriniu apšvietimu /

    … powerful laser systems, the requirements for optical elements are constantly growing. Optical glasses and their surface is particularly important part of laser technology: most of optical laser components are glass–based. While processing the glass with the traditional processing technologies, …

    vilnius Repository record for Sub-paviršinių defektų vaizdinimas stikle panaudojant optinę mikroskopiją su lazeriniu apšvietimu / (opens in a new tab)

Page 1 of 2