Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 132 for “"Optical losses"”.

  1. Contributions to Spectrophotometric Characterisation of Thin Films Showing Considerable Optical Losses

    Verschiedene Typen von Dnnschichtsystemen, die aufgrund der starken Wirkung optischer Verlustmechanismen wie Absorption oder diffuser Streuung nur schwer der optischen Analyse mittels Spektralphotometrie zugnglich sind, werden in dieser Arbeit mittels einer einheitlichen Methode …

    qucosa-diss

  2. Reducing optical losses in organic photovoltaic devices using microlens arrays: theoretical and experimental investigation

    … silicon solar cells. There are many losses that can be contributed to the low efficiencies of OPV devices. Among them, optical loss is a big part, which can account for ~40% of total losses. The incident solar spectrum still largely remains poorly absorbed. In the OPV device …

    iastate Repository record for Reducing optical losses in organic photovoltaic devices using microlens arrays: theoretical and experimental investigation (opens in a new tab)

  3. Optinių padėklų paviršiaus šiurkštumo kontrolės ir jo įtakos aukšto atspindžio dangų optiniams nuostoliams tyrimas /

    … pulse laser systems require high quality optical components with minimal optical losses. High finesse mirrors, typically manufactured using Ion Beam Sputtering (IBS), are essential for laser beam steering. However, the final performance of such mirrors depends not only on the theoretical …

    vilnius Repository record for Optinių padėklų paviršiaus šiurkštumo kontrolės ir jo įtakos aukšto atspindžio dangų optiniams nuostoliams tyrimas / (opens in a new tab)

  4. Preparation and investigation of transparent conductive film prepared by magnetron sputtering /

    … process with various oxygen content and analyze optical and electrical properties. To achieve this aim, the following tasks gave been set: 1) Investigate ITO plasma using optical emission spectroscopy; 2) Prepare ITO films with various oxygen flow rates; 3) Evaluate optical and electrical …

    vilnius Repository record for Preparation and investigation of transparent conductive film prepared by magnetron sputtering / (opens in a new tab)

  5. Itin plonų chromo dangų paruošimas ir tyrimas /

    … by magnetron sputtering and their surface and optical properties were investigated. The main aim of this work is to deposit and characterize the multilayer metal-dielectric coatings, which contain ultrathin chromium films. To accomplish the aim there were several tasks done: 1) in-situ …

    vilnius Repository record for Itin plonų chromo dangų paruošimas ir tyrimas / (opens in a new tab)

  6. Optinių dangų formavimas ant struktūrizuotų elementų naudojant atominių sluoksnių nusodinimo technologiją /

    The formation of optical coatings on structured elements using atomic layer deposition technology Hybrid polymer SZ2080 is used for the fabrication of micro-optical components by two photon polymerization technique. Physical vapor deposition is restricted in capabilities to deposit conformal …

    vilnius Repository record for Optinių dangų formavimas ant struktūrizuotų elementų naudojant atominių sluoksnių nusodinimo technologiją / (opens in a new tab)

  7. Emergent phenomena in electro-optic oxides

    … for photonic modulators, waveguides, and related optical devices. Despite decades of experimental study, the microscopic origins of their large Pockels coefficients, and the mechanisms governing optical losses in thin-film devices remain incompletely understood. This dissertation presents a …

    texas Repository record for Emergent phenomena in electro-optic oxides (opens in a new tab)

  8. Fotobiologiškai aktyvios apšvietimo technologijos kūrimas ir tyrimas /

    … using polycarbonate diffusers, but they caused optical losses. However, since the operating temperature of the controllers was reduced by setting a lower internal operating frequency of the controllers, it was possible to increase the LED current, resulting in increased irradiance and …

    vilnius Repository record for Fotobiologiškai aktyvios apšvietimo technologijos kūrimas ir tyrimas / (opens in a new tab)

  9. Cold-cavity measurement of excess optical loss in oxide-confined vertical cavity surface emitting lasers

    … requires a quantitative knowledge of the cavity optical losses. A generalized method using sub-threshold spectral measurements matched to model calculations is demonstrated to determine optical loss in microcavity lasers. Cold-cavity spectral characteristics are used to extract the size dependent …

    uiuc Repository record for Cold-cavity measurement of excess optical loss in oxide-confined vertical cavity surface emitting lasers (opens in a new tab)

  10. High power high efficiency electron-hole and unipolar quantum dot lasers

    … lengths. This limitation arises from inherent optical losses tied to the two-dimensional density of available states in QWs. A novel approach is proposed here to circumvent this limitation by introducing self-assembled QDs into the laser cavity which due to their delta-like discrete density of …

    texas Repository record for High power high efficiency electron-hole and unipolar quantum dot lasers (opens in a new tab)

  11. Atominio storio sluoksnio nusodinimo technologijos taikymas optinių dangų formavimui: dielektrinių plonų sluoksnių sintezė ir tyrimas /

    These days most optical components are deposited using physical vapor deposition (PVD). However, the improvement of laser technologies rises a demand for more complex, three dimensional (3D) substrates or more specific optical coatings that PVD is not capable to the deposit. Therefore, the search …

    vilnius Repository record for Atominio storio sluoksnio nusodinimo technologijos taikymas optinių dangų formavimui: dielektrinių plonų sluoksnių sintezė ir tyrimas / (opens in a new tab)

  12. Improving Bragg Reflection Waveguide Lasers for Quantum State Generation

    … was developed in a new facility to reduce optical losses and improve yield. The pair generation rate can be greatly improved if all of the laser power is contained in a single longitudinal mode. Conventional gratings, including distributed feedback and distributed Bragg reflectors, greatly …

    toronto-retro Repository record for Improving Bragg Reflection Waveguide Lasers for Quantum State Generation (opens in a new tab)

  13. Multifunctional coatings and encapsulations for improved light management and durability in perovskite solar cells

    … critical challenges in the development of PSCs: optical losses and long-term stability. To mitigate optical losses, a nature-inspired multifunctional light management layer (LML) was fabricated by replicating the micro- and nanoscale surface morphology of leek leaves onto cellulose acetate. The …

    aalto Repository record for Multifunctional coatings and encapsulations for improved light management and durability in perovskite solar cells (opens in a new tab)

  14. Development of low-cost high-efficiency commercial-ready advanced silicon solar cells

    … accomplished by reducing both the electrical and optical losses in solar cells through fundamental understanding, applied research and demonstrating the success by fabricating large-area commercial ready cells with much higher efficiency than the traditional Si cells. By developing and integrating …

    gatech Repository record for Development of low-cost high-efficiency commercial-ready advanced silicon solar cells (opens in a new tab)

  15. Engineering Si-compatible materials based on transparent nitrides and conductive oxides (TNCOs) for broadband active plasmonic and metamaterials applications

    … shown that these materials feature reduced optical losses compared with conventional noble metals such as Au and Ag in the visible and near-infrared spectral range. However, it is still an open challenge to tailor the structural and optical properties of these materials, and to further …

    bu Repository record for Engineering Si-compatible materials based on transparent nitrides and conductive oxides (TNCOs) for broadband active plasmonic and metamaterials applications (opens in a new tab)

  16. Radiative Transfer and Spectrophotometric Characterization of Mineral Dust Optics on Photovoltaic Cells

    … as other particles, and experiments reveal that losses can be significant (up to ~85%) depending on various factors. However, little is known about the role of light scattering and absorption in reducing optical transmission to the solar cell semiconductor. This dissertation first develops a …

    unr Repository record for Radiative Transfer and Spectrophotometric Characterization of Mineral Dust Optics on Photovoltaic Cells (opens in a new tab)

  17. Fine Line Metallization of Silicon Heterojunction Solar Cells via Collimated Aerosol Beam Direct Write

    … are amenable to decreasing both resistive and optical losses. The ability to produce high aspect ratio grid fingers, and deposit optimized grid structures on high efficiency SHJ solar cells using silver nanoparticle inks is also demonstrated. A decrease in shadowing and via profile modification …

    ndsu Repository record for Fine Line Metallization of Silicon Heterojunction Solar Cells via Collimated Aerosol Beam Direct Write (opens in a new tab)

  18. Optical characterization of wet chemically derived organic-inorganic hybrid (polyceram) films

    … of thin films of Polycerams. Numerous optical characterization techniques were performed to study the passive properties of Polycerams, including index of refraction, optical attenuation, UV transmission and surface embossing. Dielectric waveguides of superior optical quality were …

    arizona-thes Repository record for Optical characterization of wet chemically derived organic-inorganic hybrid (polyceram) films (opens in a new tab)

  19. ACTIVE PHOTONIC DEVICES IN LITHIUM NIOBATE DESIGN, FABRICATION AND CHARACTERIZATION

    Lithium niobate is a commonly used material for optical applications due to its variety of useful optical properties, making it an ideal choice for photonic integrated circuits. However, conventional fabrication techniques produce small associated index increase, precluding compact structures due …

    nus Repository record for ACTIVE PHOTONIC DEVICES IN LITHIUM NIOBATE DESIGN, FABRICATION AND CHARACTERIZATION (opens in a new tab) Download file for ACTIVE PHOTONIC DEVICES IN LITHIUM NIOBATE DESIGN, FABRICATION AND CHARACTERIZATION (opens in a new tab)

Page 1 of 7