Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 88 for “"Optimal Settings"”.

  1. Estimation of the Particle and Gas Scavenging Contributions to Wet Deposition of Organic and Inorganic Nitrogen

    … (UV)-photolysis method and presents the optimal settings for its application on atmospheric samples. Using a factorial design scheme, experiments on surrogate nitrogen compounds, typically found in the atmosphere, indicated that DON can be xviii measured with no biases if optimal settings …

    usf Repository record for Estimation of the Particle and Gas Scavenging Contributions to Wet Deposition of Organic and Inorganic Nitrogen (opens in a new tab)

  2. Dental dose and image quality surveys using optically stimulated luminescence

    … to determine if the exposures were performed at optimal settings for easy reading by the dentist. Through the use of a survey in which the dental office sends in the x-ray film to Landauer for analysis, these factors can be determined using calibration curves determined from collected data for …

    tamu Repository record for Dental dose and image quality surveys using optically stimulated luminescence (opens in a new tab)

  3. Development of Wind Tunnel Internal Strain-Gage Balance Calibration Software with Self-Assembling Gaussian Radial Basis Function Algorithm

    … of both. The GRBF algorithm was designed to find optimal settings for the number, locations, and widths of the GRBFs without trial and error attempts by the user. The new program's performance was compared against an existing balance calibration software on several experimental and artificial …

    rice Repository record for Development of Wind Tunnel Internal Strain-Gage Balance Calibration Software with Self-Assembling Gaussian Radial Basis Function Algorithm (opens in a new tab)

  4. Ion flux maps and helicon source efficiency in the VASIMR VX-100 experiment using a moving Langmuir probe array

    … scanned from pulse to pulse in an effort to find optimal settings. Secondary electron emission was found to be an important factor that artificially enhanced the measured flux at large negative bias voltages. The most accurate bias voltages were found to be around -20 volts where the flux …

    rice Repository record for Ion flux maps and helicon source efficiency in the VASIMR VX-100 experiment using a moving Langmuir probe array (opens in a new tab)

  5. Exposure of soft defects in integrated circuits using Taguchi methods

    The work of Taguchi for determining the optimal settings of controllable factors through off-line experiments focuses on products with a single quality characteristic or response. However, most products have several quality characteristics or responses of interest. Taguchi's technique in itself …

    ttu Repository record for Exposure of soft defects in integrated circuits using Taguchi methods (opens in a new tab)

  6. Inductively Coupled CMOS Power Receiver For Embedded Microsensors

    … (MPP) theory is also developed to predict the optimal settings of the power stage with 98.6% accuracy. Finally, this research addresses the system integration challenges such as synchronization and over-voltage protection. The fabricated self-synchronized prototype outputs up to 89% of the …

    gatech Repository record for Inductively Coupled CMOS Power Receiver For Embedded Microsensors (opens in a new tab)

  7. Methodology for mechanical property optimization of selective laser sintered parts using design of experiments

    … aerospace, automobile and biomedical. Machine settings, laser settings, and powder properties are all input parameters that affect the dimensional quality and mechanical properties of the produced SLS parts. A key challenge to successfully manufacturing SLS parts is learning how to control …

    texas Repository record for Methodology for mechanical property optimization of selective laser sintered parts using design of experiments (opens in a new tab)

  8. An Experimental Investigation of Friction Bit Joining in AZ31 Magnesium and Advanced High-Strength Automotive Sheet Steel

    … steel as the bit material. In order to determine optimal settings for the magnesium/steel joints, experimentation was performed using a purpose-built computer controlled welding machine, varying factors such as rotational speeds, plunge speed, cutting and welding depths, and dwell times. It was …

    byu Repository record for An Experimental Investigation of Friction Bit Joining in AZ31 Magnesium and Advanced High-Strength Automotive Sheet Steel (opens in a new tab) Download PDF for An Experimental Investigation of Friction Bit Joining in AZ31 Magnesium and Advanced High-Strength Automotive Sheet Steel (opens in a new tab)

  9. Design and simulation of the Colorado State University linear accelerator system

    … their parameters are characterized, and optimal initial settings are found. These individual simulations are then combined into a complete start-to-end simulation of the machine. The start-to-end simulation is then used to demonstrate the expected performance of the machine with the …

    colostate Repository record for Design and simulation of the Colorado State University linear accelerator system (opens in a new tab)

  10. Performance models for parallel applications under failures

    … in a volunteer environment by finding the optimal checkpoint interval. Validation is performed with a sample real world application running on a pool of distributed volunteer nodes. The results shows that the predicted checkpoint interval gives performance closed to optimal checkpoint …

    houston Repository record for Performance models for parallel applications under failures (opens in a new tab)

  11. Propagation environment assessment using UAV electromagnetic sensors

    … information allows operators to choose the optimal settings for the maximum detection range of their radar and radio systems. We also investigate the measurement system requirements and operational scenarios such as the number of unmanned aerial vehicles and the total time needed to collect …

    nps Repository record for Propagation environment assessment using UAV electromagnetic sensors (opens in a new tab)

  12. A comparative study of GDSS use: empirical evidence and model design

    … groups of three were tested in two different settings. One setting involved unaided face-to-face problem solving and the other involved GDSS-aided face-to-face problem solving. Our study expanded the research of Fijol and Woodbury and thus, we replicated the conditions of their experiment. In …

    nps Repository record for A comparative study of GDSS use: empirical evidence and model design (opens in a new tab)

  13. Simulation to determine the impacts of life-cycle manning on lieutenants

    … system. By minimizing a quadratic loss function, optimal settings are determined that trade off some expected delay in order to achieve greater consistency. This analysis reveals that this system behaves like a queueing model in which officer accessions influence the arrival rate and the number of …

    nps Repository record for Simulation to determine the impacts of life-cycle manning on lieutenants (opens in a new tab)

  14. Modeling Conversions in Online Advertising

    … model, showing how this tool can be used to find optimal settings for advertiser models of conversion attribution.</p>

    montana Repository record for Modeling Conversions in Online Advertising (opens in a new tab)

  15. Modeling Conversions in Online Advertising

    … model, showing how this tool can be used to find optimal settings for advertiser models of conversion attribution.</p>

    montana-tech Repository record for Modeling Conversions in Online Advertising (opens in a new tab)

  16. Collimator width Optimization in X-ray Luminescent Computed Tomography

    … there is still lack of information about optimal settings or combination of imaging parameters, which could yield best outputs. Research groups participating in this area have reported results on basis of dose, signal to noise ratio or resolution only. In this thesis, the candidate has …

    vt Repository record for Collimator width Optimization in X-ray Luminescent Computed Tomography (opens in a new tab)

  17. Assessing human performance trade-offs of a telephone-based information system

    … variables. A response surface was plotted, and optimal settings for the Information system were also calculated. Two seconds was found to be an optimal time for users to enter their selection. The computer synthesized speech rate should be set close to 120-150 words per minute. Background music …

    vt Repository record for Assessing human performance trade-offs of a telephone-based information system (opens in a new tab)

  18. Thermo-economic optimization of a heat recovery steam generator (HRSG) system using Tabu search

    … To achieve such low cost efficiencies, near optimal settings of parameters of the HRSG must be employed. Unfortunately, current approaches to obtaining such parameter settings are very limited. The published literature associated with the Tabu Search (TS) metaheuristic has shown conclusively …

    texas Repository record for Thermo-economic optimization of a heat recovery steam generator (HRSG) system using Tabu search (opens in a new tab)

  19. Prediction Models for Multi-dimensional Power-Performance Optimization on Many Cores

    … show that the prediction framework derives near-optimal settings of the three power-aware program adaptation knobs that we consider. Our overall runtime optimization framework achieves significant reductions in energy (12.27% mean) and ED² (29.6% mean), through simultaneous power savings (3.9% …

    vt Repository record for Prediction Models for Multi-dimensional Power-Performance Optimization on Many Cores (opens in a new tab)

Page 1 of 5