Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Optimal control design"”.

  1. Dynamic Neural Network-based Adaptive Inverse Optimal Control Design

    … Network (DNN) model based adaptive inverse optimal control design for a class of nonlinear systems. A DNN structure is developed and stabilized based on a control Lyapunov function (CLF). The CLF must satisfy the partial Hamilton Jacobi-Bellman (HJB) equation to solve the cost function in …

    siu-theses Repository record for Dynamic Neural Network-based Adaptive Inverse Optimal Control Design (opens in a new tab)

  2. OPTIMAL CONTROL DESIGN FOR POLYNOMIAL NONLINEAR SYSTEMS USING SUM OF SQUARES TECHNIQUE WITH GUARANTEED LOCAL OPTIMALITY

    Optimal control design and implementation for nonlinear systems is a topic of much interest. However, unlike for linear systems, for nonlinear systems explicit analytical solution for optimal feedback control is not available. Numerical techniques, on the other hand, can be used to approximate the …

    siu-theses Repository record for OPTIMAL CONTROL DESIGN FOR POLYNOMIAL NONLINEAR SYSTEMS USING SUM OF SQUARES TECHNIQUE WITH GUARANTEED LOCAL OPTIMALITY (opens in a new tab)

  3. Optimal control design to reduce sideslip during rolling maneuvers at supersonic mach numbers in the F-14 fighter aircraft

    … development of a modification to the flight control system (FCS) of the Grumman/Navy F-14 Tomcat to reduce excessive sideslip generated during supersonic rolling maneuvers at normal accelerations greater than one g. The airplane currently has a flight manual limitation prohibiting lateral …

    ut-knoxville Repository record for Optimal control design to reduce sideslip during rolling maneuvers at supersonic mach numbers in the F-14 fighter aircraft (opens in a new tab)

  4. Impacts of Connected and Automated Vehicles on Energy and Traffic Flow: Optimal Control Design and Verification Through Field Testing

    … to directly measure energy benefits from the designed eco-driving control strategies. In particular, vehicle-in-the-loop is leveraged for the CAVs driven on a physical test track to interact with surrounding traffic that is virtually realized through said microsimulation software in real time. …

    clemson Repository record for Impacts of Connected and Automated Vehicles on Energy and Traffic Flow: Optimal Control Design and Verification Through Field Testing (opens in a new tab)

  5. Single network adaptive critic aided nonlinear dynamic inversion

    … Programming (ADP) offers a systematic method of optimal control design for nonlinear systems. Of the many architectures based on ADP, Adaptive Critic (AC) is the most popular. An AC consists of two neural networks that interactively train each other to arrive at the optimal control solution. …

    wichita-thes Repository record for Single network adaptive critic aided nonlinear dynamic inversion (opens in a new tab)

  6. Design and control of a variable ratio gearbox for distributed wind turbine systems

    … limit power in the full-load region where pitch control is often used. To maximize electrical production, mechanical braking is applied during the normal operation of the wind turbine. A strategy is used to select gear ratios that produce torque slightly above the maximum amount the generator can …

    texas Repository record for Design and control of a variable ratio gearbox for distributed wind turbine systems (opens in a new tab)

  7. Robust power control design for wind energy in microgrid

    … Our objective is to reduce costs, while controlling a microgrid in an environment friendly manner. Since the production and consumption of wind energy is unpredictable, it is desirable for the connection between a wind farm and a gas turbine to maintain a constant energy output for the …

    wichita-thes Repository record for Robust power control design for wind energy in microgrid (opens in a new tab)

  8. Finite Element Analysis for Nonlinear Flutter Suppression of Composite Panels at Elevated Temperatures Using Piezoelectric Materials

    … are then employed for time domain simulation and controller design. A self-sensing piezoelectric actuator is used as a sensor and actuator simultaneously. An optimal control design is developed based on the linearized modal equations while the numerical simulations are obtained based upon the …

    odu Repository record for Finite Element Analysis for Nonlinear Flutter Suppression of Composite Panels at Elevated Temperatures Using Piezoelectric Materials (opens in a new tab)

  9. A cell-to-cell mapping based analysis and design of fuzzy dynamic systems and its applications

    Systematic design and analysis of fuzzy dynamic systems has been a problem which attracted much attention from researchers in recent years. In this dissertation, we propose a methodology for analysis and design of fuzzy dynamic systems. First, we introduce a new way to treat fuzzy sets: fuzzy sets …

    arizona-thes Repository record for A cell-to-cell mapping based analysis and design of fuzzy dynamic systems and its applications (opens in a new tab)

  10. Optimal design of complex systems with low sensitivity to time delay

    In this dissertation, two optimal control strategies are investigated for a large-scale decentralized system in order to optimize and study the system. The main objective of the optimization and analysis is to reduce the effect of time delay on the system. This can be accomplished by adding the …

    wichita-thes Repository record for Optimal design of complex systems with low sensitivity to time delay (opens in a new tab)

  11. Robust safety and stability of learning-based optimal controllers

    Traditional model-based design of optimal controllers for nonlinear systems under a drifting environment is nontrivial and requires solving online optimization, in general, which is computationally expensive and challenging to realize in real time. On the other hand, learning-based …

    iastate Repository record for Robust safety and stability of learning-based optimal controllers (opens in a new tab)

  12. Dynamic power system modelling and linear optimal stabilization design using a canonical form

    The linear optimal stabilization of power systems has become a very active area of research in recent years. Implementation of an optimal control scheme usually requires the measurement of all state variables, some of which are not accessible. Dynamic estimators may be used to estimate immeasurable …

    ubc Repository record for Dynamic power system modelling and linear optimal stabilization design using a canonical form (opens in a new tab) Download PDF for Dynamic power system modelling and linear optimal stabilization design using a canonical form (opens in a new tab)

  13. Control system design for morphing aircraft

    The focus of this study is flight control design of morphing aircraft. In recent years, advances in smart technologies and lightweight materials have fueled interest in morphing airvehicles. Typically, lightweight materials are used in airframe design as a means to reduce aircraft weight without …

    wichita-thes Repository record for Control system design for morphing aircraft (opens in a new tab)

  14. Simulation of the control characteristics of an axial piston pump and a flapper-nozzle valve combination

    … and simulate the mathematical model for the control of an axial piston pump using a flapper-nozzle valve. It was assumed that all the state variables are defined as the perturbations in the physical quantities; therefore, linearized relations were used. These linearized relations were …

    iastate Repository record for Simulation of the control characteristics of an axial piston pump and a flapper-nozzle valve combination (opens in a new tab)

  15. Optimal control approaches for consensus and path planning in multi-agent systems

    Optimal control is one of the most powerful, important and advantageous topics in control engineering. The two challenges in every optimal control problem are defining the proper cost function and obtaining the best method to minimize it. In this study, innovative optimal control approaches are …

    missouri Repository record for Optimal control approaches for consensus and path planning in multi-agent systems (opens in a new tab)

  16. Controller design and implementation on a two-axis dual stage nanopositioner for local circular scanning in high speed atomic force microscopy

    … appealing to alternative scan patterns, either designed to be easier for the actuators to follow or to reduce the amount of sampling needed. One particular example in this latter category is the local circular scan (LCS). LCS reduces the imaging time by scanning less sample area rather than …

    bu Repository record for Controller design and implementation on a two-axis dual stage nanopositioner for local circular scanning in high speed atomic force microscopy (opens in a new tab)

  17. Data-Driven Control with Learned Dynamics

    This research focuses on studying data-driven control with dynamics that are actively learned from machine learning algorithms. With system dynamics being identified using neural networks either explicitly or implicitly, we can apply control following either a model-based approach or a model-free …

    clemson Repository record for Data-Driven Control with Learned Dynamics (opens in a new tab)

  18. Optimal and adaptive control in large scale sensor networks

    … tools to scalable and efficiently deal with the control of complex, uncertain and time-changing large-scale systems, not only leads to a effort-, time- and cost-consuming deployment of Large-Scale Control Systems (LSCSs), but also prohibits the wide application of LSCS in areas and applications …

    greece Repository record for Optimal and adaptive control in large scale sensor networks (opens in a new tab)

  19. Controller Design for Hydraulic Position Control Systems

    … (linear or rotary) which in turn is used to control the positioning or speed of the load. Because there are no major losses associated with throttling of the fluid, power losses are minimized. In earlier EHA systems, the actuator was limited to that of a rotary system because of the …

    sask Repository record for Controller Design for Hydraulic Position Control Systems (opens in a new tab)

  20. A new dynamic mode for fast imaging in atomic force microscopes

    … nanopositioning stages and electronics. The design is accomplished by model-based force regulation that utilizes the fast cantilever deflection signal instead of its slower derivative signals used in existing methods. The control design uses the vertical and dither (shake) piezo-actuators to …

    uiuc Repository record for A new dynamic mode for fast imaging in atomic force microscopes (opens in a new tab)

Page 1 of 2