Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 8 of 8 for “"Optimized Blade"”.

  1. Studies of Multipoint Optimization of Transonic Stators

    … and 17% faster than K-ε. Variable stator blades were added to an optimized blade geometry and compared to a design case where the stator blade angle was a part of the design vector. The optimized blade without variable stator blades was able to reduce total pressure loss to be 66.5% of the …

    ku Repository record for Studies of Multipoint Optimization of Transonic Stators (opens in a new tab)

  2. Reduced order modelling of optimized transonic compressor rotor blades

    … a faster design for transonic compressor rotor blades with the same efficiency would therefore be beneficial. In this thesis the blade generation method, multiple circular arc (MCA) blades represented on conical surfaces was followed to investigate the feasibility of modelling an already …

    chalmers Repository record for Reduced order modelling of optimized transonic compressor rotor blades (opens in a new tab)

  3. 3D Aerodynamic Optimization of NREL VI Wind Turbine Blade for Increased Power Output and Visualization of Flow Characteristics

    … aspect of optimization of NREL VI wind turbine blade for increased power output using commercial solver ANSYS 14.5. The power curve obtained from BEMT, Baseline NREL VI CFD Simulations and Optimized Blade Simulations are compared with experimental results. Over prediction is observed in the …

    embry-riddle Repository record for 3D Aerodynamic Optimization of NREL VI Wind Turbine Blade for Increased Power Output and Visualization of Flow Characteristics (opens in a new tab)

  4. Concept Application Of Active Magnetic Bearing Technology For Offshore Horizontal Axis Wind Turbines

    … of a 130 MW wind turbine was remodeled and optimized to facilitate the integration of magnetic bearings. Also, a bench test using scaled wind turbine models was conducted to examine the performance characteristics of both bearing systems. Simulation results show that shaft weight and input …

    nodak Repository record for Concept Application Of Active Magnetic Bearing Technology For Offshore Horizontal Axis Wind Turbines (opens in a new tab)

  5. Aerodynamic Design and Structural Analysis Procedure for Small Horizontal-Axis Wind Turbine Rotor Blade

    … two correlated goals of designing a new rotor blade to be used with the Cal Poly Wind Power Research Center, as well as defining the methodology required for the aerodynamic analysis of an optimized blade, the procedure required for generation of an accurate CAD model for the new blade …

    calpoly Repository record for Aerodynamic Design and Structural Analysis Procedure for Small Horizontal-Axis Wind Turbine Rotor Blade (opens in a new tab)

  6. Fluid-structure Interaction and Multidisciplinary Design Analysis Optimization of Composite Wind Turbine Blade

    … process is defined for a composite wind turbine blade to optimize its aerodynamic and structural performance by developing a fluid-structural interaction (FSI) system. The objectives are to maximize aerodynamic efficiency and structural robustness while reducing blade mass and total cost. In the …

    embry-riddle Repository record for Fluid-structure Interaction and Multidisciplinary Design Analysis Optimization of Composite Wind Turbine Blade (opens in a new tab)

  7. Experimental and Numerical Investigations of Optimized High-Turning Supercritical Compressor Blades

    … of three high-turning supercritical compressor blades were conducted. The blades were designed at an inlet Mach number (M1) of 0.87 and inlet flow angle of 48.4 deg, with high camber angles of about 55 deg. The baseline blade was a conventional Controlled Diffusion Airfoil (CDA) design and the …

    vt Repository record for Experimental and Numerical Investigations of Optimized High-Turning Supercritical Compressor Blades (opens in a new tab)

  8. FINISH-MACHINING STRATEGIES FOR BLADED DISKS

    Integrally Bladed Rotors (IBRs) or Bladed Disks (Blisks) are strategic components of compressor or turbine stages of aircraft engines. Development of manufacturing techniques and materials have aided the integration of two components, blades and the disk, which were originally manufactured …

    whiterose Download PDF for FINISH-MACHINING STRATEGIES FOR BLADED DISKS (opens in a new tab)