Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Orthogonal machining"”.

  1. Prediction of cutting forces in orthogonal machining.

    In this investigation two methods of machining analysis have been used to make predictions of cutting forces from a knowledge of the workpiece material flowstress and the cutting conditions. The first method of the analysis is used withthree different materials namely EN8, Aluminium and 70-30 …

    sheffield-hallam Download PDF for Prediction of cutting forces in orthogonal machining. (opens in a new tab)

  2. Shearing, ploughing, and wear in orthogonal machining

    Under normal machining conditions, cutting forces are due primarily to the bulk shearing of the workpiece material in a narrow region called the shear zone. However, under certain conditions, such as finishing cuts or a worn tool, force components due to the rubbing and ploughing of the edge or …

    uiuc Repository record for Shearing, ploughing, and wear in orthogonal machining (opens in a new tab)

  3. Determination of material constitutive models using orthogonal machining tests

    … high conductivity (OFHC) copper using orthogonal machining tests. This dissertation is divided into two parts. Part one is concerned with improving Johnson-Cook (JC) constitutive model parameters for AISI 1045 carbon steel by comparing results of finite element (FE) simulations of …

    wichita-thes Repository record for Determination of material constitutive models using orthogonal machining tests (opens in a new tab)

  4. Mechanisms and modeling of white layer formation in orthogonal machining of steels

    … that the temperature for phase transformation in machining is the same as the nominal phase transformation temperature of the steel, (3) Quantify the contributions of thermal and mechanical effects to white layer generation in machining, (4) Develop a semi-empirical procedure for prediction of …

    gatech Repository record for Mechanisms and modeling of white layer formation in orthogonal machining of steels (opens in a new tab)

  5. A Study on the Impact of Tool-Chip Contact Time on the Shear Angle in Orthogonal Machining using Constitutive Models on Metal Cutting FEM Simulations

    Machining is a subtractive production technique for achieving desired shapes from preformed blocks of materials with surface quality and dimensional accuracies. Despite the development of high performance finite-element codes, the simulation of machining remains a complex task due to geometric …

    clemson Repository record for A Study on the Impact of Tool-Chip Contact Time on the Shear Angle in Orthogonal Machining using Constitutive Models on Metal Cutting FEM Simulations (opens in a new tab)

  6. ANALYSIS OF MACHINING PROCESS USING THE FINITE ELEMENT METHOD

    The orthogonal machining process is modelled using the finite element method. Starting with fundamental work material properties and cutting conditions, the distribution of flow stress within the chip and workpiece is computed. Plastic and elastic tool-chip friction are accounted for. The …

    nus Repository record for ANALYSIS OF MACHINING PROCESS USING THE FINITE ELEMENT METHOD (opens in a new tab) Download file for ANALYSIS OF MACHINING PROCESS USING THE FINITE ELEMENT METHOD (opens in a new tab)

  7. An Analytical Model of Material Deformation in Rotary Friction Welding of Thin-Walled Tubes

    … transition in this path is compared to orthogonal machining and equal channel angular pressing. The process to estimate the variables needed to calculate strain and strain rates using the equations from orthogonal machining and equal channel angular pressing is defined. Strain and strain …

    byu Repository record for An Analytical Model of Material Deformation in Rotary Friction Welding of Thin-Walled Tubes (opens in a new tab) Download PDF for An Analytical Model of Material Deformation in Rotary Friction Welding of Thin-Walled Tubes (opens in a new tab)

  8. Engineering Residual Stress into the Workpiece through the Design of Machining Process Parameters

    … a prescribed residual stress profile for an orthogonal machining operation. The model is based on the inverse solution of a physics-based modeling approach of the orthogonal machining operation and the inverse solution of the residual stress prediction from Hertzian stresses. Experimental and …

    gatech Repository record for Engineering Residual Stress into the Workpiece through the Design of Machining Process Parameters (opens in a new tab)

  9. Numerical and Experimental Assessment of Nano MQL Machining of Ti-6Al-4V

    … studies to attest the benefits of NFMQL machining; however, numerical modeling of NFMQL machining has not received significant attention. Since machining with coolant is a Multiphysics phenomenon, Finite Element Method (FEM) and Computational Fluid Dynamics (CFD) are needed to construct a …

    guelph Repository record for Numerical and Experimental Assessment of Nano MQL Machining of Ti-6Al-4V (opens in a new tab)

  10. An investigation of the machining performance and mechanisms with rake face textured cutting tools

    … tool-work interfaces and cutting tool wear in machining. However, a comprehensive investigation is imperative to provide an insight into the mechanisms under which cutting tool surface textures improve the cutting performance. An experimental study is reported to investigate the effect of …

    unsw Repository record for An investigation of the machining performance and mechanisms with rake face textured cutting tools (opens in a new tab)

  11. Modeling and Control of Roll-To-Roll Manufacturing Systems for Metal Peeling

    … generated from a rotating feedstock by orthogonal machining under controlled tension. When integrated with roll-to-roll transport and processing, metal peeling enables single-step continuous production of strip and foil, substantially reducing energy use, emissions, and manufacturing …

    tamu Repository record for Modeling and Control of Roll-To-Roll Manufacturing Systems for Metal Peeling (opens in a new tab) Embargoed until 2028-05-01

  12. Committee neural network force prediction model in milling of fiber reinforced polymers

    … Some of the damage problems encountered during machining these materials include: delamination, surface roughness and high rate of tool wear. Major factors that affect damage during machining in these materials are cutting forces, tool geometry, feed rate, and spindle speed. The first part of …

    wichita-thes Repository record for Committee neural network force prediction model in milling of fiber reinforced polymers (opens in a new tab)

  13. A Thermo-Mechanical Force Model for Machining Hardened Steel

    … to machine these difficult to cut alloys. The machining of hardened tool steels have been explored in the recent literature to a great extent because of the possible gains and benefits this technology has to offer. Near net shape manufacturing can become a viable technology and save the die and …

    mcmaster Repository record for A Thermo-Mechanical Force Model for Machining Hardened Steel (opens in a new tab)

  14. On the characterization of Johnson-Cook constants : numerical and experimantal study of high speed machining aerospace alloys

    … industry would eventually replace chemical machining by mechanical machining which is more accurate, more predictable and more ecological. In fact, the discharges in the case of chemical machining contain especially carbon dioxide and solvents that are difficult to degrade in groundwater. …

    ets-quebec Download PDF for On the characterization of Johnson-Cook constants : numerical and experimantal study of high speed machining aerospace alloys (opens in a new tab)

  15. A Tool Wear Comparative Study in Turning Versus Computer Simulation in 1018 Steel

    The material removal process uses cutting tools in order to produce the desired shape of the workpiece. Tool wear has been a problem for cutting tools, since cutting tools wear and break. Research has been accomplished in the tool wear field for tool life and more recently tool wear. The computer …

    byu Repository record for A Tool Wear Comparative Study in Turning Versus Computer Simulation in 1018 Steel (opens in a new tab) Download PDF for A Tool Wear Comparative Study in Turning Versus Computer Simulation in 1018 Steel (opens in a new tab)

  16. Výpočtová simulace procesu třískového obrábění

    Tato diplomová práce zpracovává seznam různých dostupných konečnoprvkových programů, které nám umožní simulovat proces dělení materiálu. Závěrem zde hodnotíme jejich výhody a nevýhody. V programu ANSYS Ls-Dyna byl vytvořen 3D model, na kterém simulujeme proces ortogonálního třískového obrábění a …

    brno-tech Repository record for Výpočtová simulace procesu třískového obrábění (opens in a new tab)

  17. Contributions to understanding the high speed machining effects on aeronautic part surface integrity

    … on part surface integrity during the machining of aluminium alloys and hardened materials (low alloy steels) using orthogonal machining tests data. The studied materials are two aluminum alloys (6061-T6 and 7075-T651) and AISI 4340 steel. The AISI 4340 steel was machined after been …

    ets-quebec Download PDF for Contributions to understanding the high speed machining effects on aeronautic part surface integrity (opens in a new tab)