Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 105 for “"Other Aerospace Engineering"”.

  1. Thermal Modeling and Testing of the Blue Thermal Vacuum Chamber

    The Blue Thermal Vacuum Chamber (TVAC) located in the Space Environments Laboratory at California Polytechnic State University, San Luis Obispo (Cal Poly), may be used for thermal vacuum testing of test articles that fit with in the semi cylindrical test section that has a radius of approximately …

    calpoly Repository record for Thermal Modeling and Testing of the Blue Thermal Vacuum Chamber (opens in a new tab)

  2. Secondary Uses of Ballutes After Aerocapture

    Aerocapture is a method for spacecraft orbital insertion that is currently being assessed for use in interplanetary missions. This method would use a low periapsis hyperbolic entry orbit to induce drag allowing the spacecraft to slow down without the use of a propulsion system. This is accomplished …

    calpoly Repository record for Secondary Uses of Ballutes After Aerocapture (opens in a new tab)

  3. The measurement of the adhesion of glaze ice.

    … pusher tests and centrifuge tests. These and other methods are problematic in evaluating the adhesive properties of ice to a substrate in aircraft icing conditions; no data in the literature exists that accounts for stress concentrations at the interface and the strain rate at the interface, …

    louisville Repository record for The measurement of the adhesion of glaze ice. (opens in a new tab)

  4. Improving Solder Joints Formed in Microgravity by Use of Magnetic Soldering Paste Additives

    With the expansion of the space industry, the need for the capability to repair electronics in space grows. Previous researchers have found that soldering in microgravity has yielded joints of poorer quality than those made on Earth, with increased interior porosity. WVU’s microgravity research …

    wvu Repository record for Improving Solder Joints Formed in Microgravity by Use of Magnetic Soldering Paste Additives (opens in a new tab)

  5. Conceptual Design of MALE UAVs

    … means possible across multiple subdisciplines of Aerospace Engineering. This paper will outline a unique methodology that involves calculating certain design variables such as wing loading, power loading, aspect ratio and cruise altitude in the conceptual design phase for MALE (medium altitude …

    wvu Repository record for Conceptual Design of MALE UAVs (opens in a new tab)

  6. Micrometeoroid Fluence Variation in Critical Orbits Due to Asteroid Disruption

    Micrometeoroids and orbital debris (MMOD) is a growing issue with international importance. Micrometeoroids are naturally occurring fragments of rock and dusk that exist throughout the solar system. Orbital debris is human made material like rocket bodies, paint flakes, and the effluent of …

    calpoly Repository record for Micrometeoroid Fluence Variation in Critical Orbits Due to Asteroid Disruption (opens in a new tab)

  7. Characterization of the Spallation Phenomenon in Ablative Thermal Protection System Materials Resulting from Arc-Jet Experiments

    Thermal protection systems are critical for protecting spacecraft from the large amounts of heating incurred during atmospheric entry. Ablative thermal protection systems in particular often consist of a carbon fiber matrix impregnated with a polymer resin and use thermal and chemical reactions to …

    uky-thes Repository record for Characterization of the Spallation Phenomenon in Ablative Thermal Protection System Materials Resulting from Arc-Jet Experiments (opens in a new tab)

  8. Mass Estimation Through Fusion of Astrometric and Photometric Data Collection with Application to High Area-to-Mass Ratio Objects

    … can greatly affect its orbital dynamics. On the other hand, photometric data is not sensitive to mass but is a function of the albedo-area and the rotational dynamics of the space object. Thus from these two data types it is possible to disentangle intrinsic properties using albedo-area and …

    calpoly Repository record for Mass Estimation Through Fusion of Astrometric and Photometric Data Collection with Application to High Area-to-Mass Ratio Objects (opens in a new tab)

  9. Thermal Analysis of a Monopropellant Micropropulsion System for a CubeSat

    … CubeSat are the next step in advancement in the Aerospace Industry. This is no longer a quest that is being sought by just university programs, but a challenge that is being taken on by all of the industry due to the low-cost missions that can be accomplished. At this time, all of the proposed …

    calpoly Repository record for Thermal Analysis of a Monopropellant Micropropulsion System for a CubeSat (opens in a new tab)

  10. Development of a Tailored Flight Test Approach for Small Unmanned Aircraft Systems

    This document contains the details of a study conducted to determine an effective performance flight test approach specifically for small Unmanned Aircraft Systems (sUAS). This was done by taking proven procedures and documentation from the FAA and the Air Force for manned aircraft and tailoring …

    calpoly Repository record for Development of a Tailored Flight Test Approach for Small Unmanned Aircraft Systems (opens in a new tab)

  11. Control System Development for Small UAV Gimbal

    The design process of unmanned ISR systems has typically driven in the direction of increasing system mass to increase stabilization performance and imagery quality. However, through the use of new sensor and processor technology high performance stabilization feedback is being made available for …

    calpoly Repository record for Control System Development for Small UAV Gimbal (opens in a new tab)

  12. The Feasibility and Application of Observing Small LEO Satellites with Amateur Telescopes

    … data to further research efforts within the Aerospace community, through the use of amateur telescopes. A Meade LX200 12 in. telescope and Lumenera Skynyx 2.0 camera were utilized to observe small LEO satellites, using a well-documented point-and-wait staring method. Over a period of three …

    calpoly Repository record for The Feasibility and Application of Observing Small LEO Satellites with Amateur Telescopes (opens in a new tab)

  13. CubeSat Constellation Analysis for Data Relaying

    Current CubeSat communication technology limits the amount of time, and number of accesses with ground stations. It has been proposed to use a constellation of CubeSats to improve relay performance and increase the number of accesses between a CubeSat and ground stations. By using the spatial and …

    calpoly Repository record for CubeSat Constellation Analysis for Data Relaying (opens in a new tab)

  14. Development and Verification of an Updated Thermal Model for Cal Poly's Small Thermal Vacuum Chamber

    This thesis discusses modifications made to the Small Thermal Vacuum (TVAC) Chamber in the Space Environments Laboratory at California Polytechnic State University, San Luis Obispo, and the development and verification of an updated thermal model reflecting these changes. The chamber was redesigned …

    calpoly Repository record for Development and Verification of an Updated Thermal Model for Cal Poly's Small Thermal Vacuum Chamber (opens in a new tab)

  15. Development of an Interactive Wave Drag Capability for the OpenVSP Parametric Geometry Tool

    Minimizing wave drag is critical to successful and efficient transonic and supersonic flight. Area-ruling is the process of managing the cross-sectional area of an aircraft to lessen the wave drag experienced in flight. Effectively calculating the necessary areas for a given aircraft can be …

    calpoly Repository record for Development of an Interactive Wave Drag Capability for the OpenVSP Parametric Geometry Tool (opens in a new tab)

  16. Improvement of Electromagnetic Railgun Barrel Performance and Lifetime by Method of Interfaces and Augmented Projectiles

    Several methods of increasing railgun barrel performance and lifetime are investigated. These include two different barrel-projectile interface coatings: a solid graphite coating and a liquid eutectic indium-gallium alloy coating. These coatings are characterized and their usability in a railgun …

    calpoly Repository record for Improvement of Electromagnetic Railgun Barrel Performance and Lifetime by Method of Interfaces and Augmented Projectiles (opens in a new tab)

  17. Neural Network Models for Generating Synthetic Flight Data

    … test data is a valuable resource used in many aerospace applications. However, procuring a sufficiently large database of flight test data poses several challenges. Nominal flight tests can be expensive and time-consuming and require much post-processing depending on the availability of sensors …

    embry-riddle Repository record for Neural Network Models for Generating Synthetic Flight Data (opens in a new tab)

  18. Flow Field Measurement and Qualification of the West Virginia University Environmental Wind Tunnel

    … well as educational purposes for students in the Aerospace Engineering Department. The methods employed for this effort included developing a grid of pitot tubes to cover the test section cross sectional area. An electric pressure-scanning module that contained 64 pressure scanning ports was …

    wvu Repository record for Flow Field Measurement and Qualification of the West Virginia University Environmental Wind Tunnel (opens in a new tab)

  19. COMMISSIONING AND TESTING OF A NEW DUSTY THERMAL VACUUM CHAMBER

    The Dusty Thermal Vacuum Chamber (DTVAC) is a new facility purchased by the Planetary Surface Technology Development Lab (PSTDL) that will be used to test the Technology Readiness Level (TRL) of extraplanetary devices and systems. With the use of vacuum pumps and simulated regolith, the DTVAC can …

    mtu Repository record for COMMISSIONING AND TESTING OF A NEW DUSTY THERMAL VACUUM CHAMBER (opens in a new tab)

Page 1 of 6