Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1677 for “"Out of plane"”.
-
Micromachined, Out-of-Plane Micro Flow Sensors
In addition, we use the fabrication platform to integrate 8 sensor array with on-chip signal conditioning using a commercial operational amplifier circuit. A new method to make the sensor array flexible is also proposed.
-
Out-of-Plane Vibration of Portal Frames
… are primarily related to the dynamic response of simple portal frames. the theoretical results obtained sing beam elements with consistent mass matrix, are compared with experimental results. The interaction of the components in modes of the combined structure is investigated.</p>
-
Design of Unimorph Out-of-Plane Piezoelectric Actuator
… transduction is an important component of microelectromechanical systems (MEMS), a technology with wide-ranging applications, including mobile computing, sensors, energy harvesting, and displays. These disparate applications have varying performance requirements, but generally …
-
Moiré interferometry for out-of-plane displacement measurements
Moiré interferometry is a relatively new branch of photomechanics that utilizes a diffraction grating on the specimen to determine surface displacements. To date, it has been used primarily to determine in-plane displacements of the specimen surface. The objective of this work is to demonstrate …
-
Design and implementation of out-of-plane thermal actuators
The goal of this research is mainly to study the feasibility of using thermal expansion buckle up effect of a microbridge structure to develop a vertical motion, large-force, large-displacement electrical thermal actuator device for micro systems application. Initial results on a prototype system …
-
Seismic Assessment of Out-of-Plane Loaded Unreinforced Masonry Walls
This thesis investigates the behaviour of URM walls subjected to out-of-plane seismic forces, and the study is focused primarily on single-storey and two-storey one-way spanning walls connected to flexible diaphragms. Expressions that describe the intermediate-height cracking of out-of-plane loaded …
-
Minimum steel requirements for masonry walls : out-of-plane forces
The behaviour of reinforced masonry walls subjected to out-of-plane forces, and the limitations on amounts and spacing of reinforcement required by the present code were examined. A research project was carried out in order to determine experimentally the capacity of the walls, the appropriate …
-
Out-of-plane strengthening of unreinforced masonry walls using FRP.
… structures constitute both a significant portion of the world’s heritage buildings and a significant component of the modern residential building stock, and are particularly susceptible to damage from out-of-plane loads such as those generated by earthquakes (Ingham and Griffith 2011). …
-
Unreinforced masonry walls subjected to out-of-plane seismic actions.
… must possess sufficient capacity to withstand out-of-plane collapse. Traditionally, design against this type of failure has been performed using a force-based (FB) approach, in which the engineer must ensure that the force capacity of the wall is not exceeded during a design earthquake. In …
-
Reactivity of 2D Materials Induced via Out-of-Plane Distortions
Due to the increasing scarcity of raw materials and the great extent of waste produced from solvent-based reactions, the scientific community has developed an interest in pursuing solid-state methods of driving chemical reactions. Mechanochemistry- inducing chemical reactions by the direct …
-
Fabrication of out-of-plane microneedles for drug delivery and biosensing
… microneedles, and investigates new methods of characterizing the drug delivery and interstitial fluid sampling using microneedles. First, a method is presented for fabrication of hollow polymer microneedle arrays. Microneedles are formed during a solvent casting process, which leaves a …
-
Out-of-plane seismic performance of unreinforced clay brick masonry walls
Given sufficient anchorage to the diaphragms, out-of-plane walls in unreinforced masonry buildings have been shown to crack above mid-height and rock as two rigid bodies. This study investigates the sensitivity of the rocking response to the type of ground motion and the quality of the wall …
-
Development of hollow out-of-plane polymer microneedles using solvent casting
… research has been done to find innovative ways of drug delivery to replace traditional injection using hypodermic needles. Although microneedles are proposed to provide one of the most effective and convenient transdermal drug delivery methods, their expensive fabrication techniques have created …
-
Out-of-plane behaviour of concrete block walls with unbonded reinforcement
The use of grout in conventional reinforced masonry construction increases the cost and time of construction but, when used in combination with reinforcing steel, allows walls subject to out-of-plane loads an enhanced ability to span between lateral support levels. Reinforced concrete block walls …
-
Out-of-plane behaviour of masonry walls: structural assessment and strengthening
… obtido pode servir de referência para profissionais envolvidos em atividades de engenharia destinadas à avaliação estrutural de edifícios existentes.
-
Dynamic analysis of out-of-plane loaded masonry walls using homogenization
… contínuos de placa e casca (teorias de Kirchhoff-Love e Mindlin-Reissner). Uma técnica de homogeneização periódica de primeira ordem com recurso a tensões de Cauchy é assumida. As unidades de alvenaria são modeladas com EFs quadriláteros lineares com um comportamento elástico. As juntas de …
Page 1 of 84