Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 76 for “"Output Beam"”.

  1. An Optical System to Transform the Output Beam of a Quantum Cascade Laser to be Uniform

    … remote sensing applications. However, the output beam from a QCL has some characteristics that are undesirable in a calibration source. These characteristics need to be mitigated before QCLs can be used as calibration sources. This study presents the design and implementation of an optical …

    utahstate Repository record for An Optical System to Transform the Output Beam of a Quantum Cascade Laser to be Uniform (opens in a new tab)

  2. A feasibility study on the use of a low-resolution infrared detector array for monitoring the output beam of a high-power laser

    … laser's spot focus distance, spot location, and output changes during a full day of operation potentially producing an uncertain weld strength and a variation in cutting thickness. Therefore, it is desirable to monitor the laser beam output to determine if changes are occurring in the operating …

    ut-knoxville Repository record for A feasibility study on the use of a low-resolution infrared detector array for monitoring the output beam of a high-power laser (opens in a new tab)

  3. Optical development of an ion/electron acceleration facility

    … data is then compared with the actual output beam from the accelerating facility. The behavior of each of the elements is determined and its affect on the output beam is established. Changes to the design of the facility can then be made based upon this information.

    rice Repository record for Optical development of an ion/electron acceleration facility (opens in a new tab)

  4. Thermodynamics of Transiently Pumped CO2 Gas Laser Plasmas

    … low operating voltage, uniformity of the output beam, and the ability to vary the output parameters over a wide range. A major aim of this dissertation is to provide a fundamental physical understanding and data that will enable effective design.

    glasgow Download PDF for Thermodynamics of Transiently Pumped CO2 Gas Laser Plasmas (opens in a new tab)

  5. Šiluminio lęšio charakterizavimas bei jo įtakos mažinimas išilginio diodinio kaupinimo lazeriuose /

    … laser threshold reducing and ensured improved output beam quality parameter M2 in wide pump power range. Prospects of output pulse energy scaling in diode end-pumped Yb:YAG laser by employing elliptical mode geometry was investigated. During our experiments, maximum average power in of ~ 5.5 W …

    vilnius Repository record for Šiluminio lęšio charakterizavimas bei jo įtakos mažinimas išilginio diodinio kaupinimo lazeriuose / (opens in a new tab)

  6. Thermal lens diagnostics and mitigation in diode end pumped lasers /

    … laser threshold reducing and ensured improved output beam quality parameter M2 in wide pump power range. Prospects of output pulse energy scaling in diode end-pumped Yb:YAG laser by employing elliptical mode geometry was investigated. During our experiments, maximum average power in of ~ 5.5 W …

    vilnius Repository record for Thermal lens diagnostics and mitigation in diode end pumped lasers / (opens in a new tab)

  7. Robust Control Design for Laser Cavity Squeezing in Quantum Optical Systems

    … of quantum optical systems through squeezing the output beam of the cavity. As a comprehensive example of this type of system, quantum optomechanical sensors are investigated. To this end, a nonlinear model of quantum optomechanical sensors is first extended incorporating various noises. Then, …

    concordia Download PDF for Robust Control Design for Laser Cavity Squeezing in Quantum Optical Systems (opens in a new tab)

  8. Blue Laser Source for Laser-Induced Fluorescence

    … 405 nm, and this was realized by doubling the output of an 810 nm diode laser. In order to generate sufficient power at 810 nm, an external cavity tapered laser amplifier system was constructed. It consists of a tapered diode, that were anti-reflection coated on both the front and back facets. On …

    lund Repository record for Blue Laser Source for Laser-Induced Fluorescence (opens in a new tab) Download PDF for Blue Laser Source for Laser-Induced Fluorescence (opens in a new tab)

  9. Integrated photonics beam delivery via tilted Bragg gratings for quantum technology

    … the method for generating an arbitrary beam in free space above the chip from an integrated planar waveguide with possible polarisation control. This method will infer that even the readout devices, such as a big lens, can be replaced by integrating tilted Bragg gratings, offering one …

    soton Download PDF for Integrated photonics beam delivery via tilted Bragg gratings for quantum technology (opens in a new tab)

  10. Thermal lensing in a high power diode-pumped continuous wave Yb⁺³:KY(WO₄)₂ laser

    … efficient, reliable and durable with superior beam quality when compared to flash-lamp pumped lasers. Double-tungstate crystals such as potassium yttrium tungstate Yb:KY(WO₄)₂ (Yb:KYW) are one of the most popular active materials used in DPSS lasers for generation of continuous wave radiation …

    manitoba Repository record for Thermal lensing in a high power diode-pumped continuous wave Yb⁺³:KY(WO₄)₂ laser (opens in a new tab)

  11. Development of an Efficient Ti:Sapphire Laser Transmitter for Atmospheric Ozone Lidar Measurements

    … The Ti:sapphire lasers have shown the required output beam quality at maximum output pulse energy, 115 mJ at 867 nm and 105 mJ at 900 nm, with a slope efficiency of 40% and 32%, respectively, to achieve 30 mJ of ultraviolet laser output at 289 run and 300 nm with two LBO nonlinear crystals.

    odu Repository record for Development of an Efficient Ti:Sapphire Laser Transmitter for Atmospheric Ozone Lidar Measurements (opens in a new tab)

  12. BEAM COMBINING OF FIBER LASERS AND VERTICAL EXTERNAL CAVITY SURFACE EMITTING LASERS USING VOLUME BRAGG GRATINGS

    … laser sources with near diffraction limited beam quality outputs have enabled wide range of applications. However, physical constraints such as material heating and nonlinear effects limit the maximum achievable power of these laser sources. In order to obtain higher power level, beam …

    unm Repository record for BEAM COMBINING OF FIBER LASERS AND VERTICAL EXTERNAL CAVITY SURFACE EMITTING LASERS USING VOLUME BRAGG GRATINGS (opens in a new tab)

  13. Amplitude modulation using a nonlinear optical loop mirror

    … self-phase modulation are characterized. For a beam of sufficient intensity, its optical path through the fiber may be altered due to the dependence of the phase on intensity. Thus, two coherent beams of light of differing intensity can be made to interfere constructively or destructively even …

    nps Repository record for Amplitude modulation using a nonlinear optical loop mirror (opens in a new tab)

  14. Keramikinio Yb:YAG lazerio generacijos ypatumų tyrimas /

    … showed 1,61W generation threshold and 1W output power were reached with laser efficiency of 22,5%. Afterwards I continued with ceramics laser investigation. Ceramics showed 1,46-2,38 times higher generation threshold compared to monocrystalline. Second 5 % ceramic sample showed highest …

    vilnius Repository record for Keramikinio Yb:YAG lazerio generacijos ypatumų tyrimas / (opens in a new tab)

  15. Non-electro-optic methods of high frequency laser modulation

    … light are explored. For a high intensity beam, the optical path of a beam can be altered due the dependence of the phase on intensity. Thus two coherent beams of light of different intensity can be made to constructively or destructively interfere even if the physical paths are identical. …

    nps Repository record for Non-electro-optic methods of high frequency laser modulation (opens in a new tab)

  16. Didelės energijos keturių lėkių Nd:YAG stiprintuvas su SBS impulso spūda interferenciniam struktūravimui /

    … of interference of high-intensity coherent laser beams, as well as laser ablation, to create functional periodic microstructures. Evident periodic microstructures can be produced in a very short time, with spacing ranging from sub-micrometres to 20 mm [5]. The structures produced can be of various …

    vilnius Repository record for Didelės energijos keturių lėkių Nd:YAG stiprintuvas su SBS impulso spūda interferenciniam struktūravimui / (opens in a new tab)

  17. An experimental study of phase conjugation via stimulated Brillouin scattering applied to a high power Nd:YAG oscillator/amplifier laser system

    … is described, which gave a high quality output beam. We discuss the properties of Nd:YAG laser amplifiers of the type used to amplify this output, and the ensuing beam distortions. The processes of phase conjugation and stimulated Brillouin scattering are then explained. In the latter …

    soton Download PDF for An experimental study of phase conjugation via stimulated Brillouin scattering applied to a high power Nd:YAG oscillator/amplifier laser system (opens in a new tab)

  18. Real-time terahertz imaging using a quantum cascade laser and uncooled microbolometer focal plane array

    … diffraction effects incurred by the QCL output beam, an imaging scheme was developed in which the camera's focal plane array successfully detected wavelengths that are more than an order of magnitude longer than those for which the system is designed. Moreover, the incorporation of …

    nps Repository record for Real-time terahertz imaging using a quantum cascade laser and uncooled microbolometer focal plane array (opens in a new tab)

  19. Multi-Kilowatt Fiber Laser Amplifiers and Hollow-Core Delivery Fibers

    … is introduced for real-time monitoring of laser beam modal content and beam quality. Initial tests highlight the photonic lantern's efficiency in predicting the onset of modal instability while simultaneously measuring the laser's output beam quality, M2. Second, this work achieved 2.2 kW …

    ucf Repository record for Multi-Kilowatt Fiber Laser Amplifiers and Hollow-Core Delivery Fibers (opens in a new tab)

  20. Next-Generation Integrated Photonics: Graphene and Optical Phased Arrays

    … arrays with record-breaking efficiency and output beam quality. The dissertation is divided into five chapters. In the first, I introduce silicon photonics, discuss its capabilities and limitations, and summarize the key results of the dissertation. In Chapter 2, I lay a theoretical …

    cornell Repository record for Next-Generation Integrated Photonics: Graphene and Optical Phased Arrays (opens in a new tab)

Page 1 of 4