Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"Output Intensity"”.
-
DEEP SUBWAVELENGTH METAL PATTERNS FOR IMPROVING PERFORMANCE OF TERAHERTZ PHOTOMIXER AND PASSIVE COMPONENT
… outperforms by about two orders magnitude in output intensity. Additionally the branchlike nano-electrodes structure having more carrier collection points is designed to multiply the nano-antenna effect. The output intensity of branchlike electrodes photomixer is about one order magnitude …
-
Evanescent Wave Coupling Using Different Subwavelength Gratings for a MEMS Accelerometer
… grating accelerometer device and the output intensity is measured using a geranium photodiode. As the platform is displaced, the grating separation between the two gratings changes and causes the output intensity to change. Using the coupled subwavelength grating simulations as a …
-
Integrated optical devices in lithium niobate
… to high voltage measurement is discussed. The output Intensity of the series interferometric filter is calculated. Measured results on a two section filter are presented. Also, the output intensity of a multibranch interferometric filter is determined. Experimental results on a three branch …
-
Non uniform fast fourier transform technique to estimate the Stokes spectra for a fiber optic spectral polarimetry instrument
… fiber-optic spectral polarimetry instrument [2], output intensity is a superposition of the four Stokes spectra modulated at different carrier frequencies dependent on phase retardations in polarization maintaining (PM) fiber segments. A simple Fourier transform of the output intensity isolates …
-
A Study of Spiking and Relaxation Oscillations in Nd:YAG Laser Using Measured Laser Parameters
… that when the cavity losses are perturbed, the output intensity experiences an amplitude modulation or becomes a regular train of spikes, with the frequency depending on both the frequency of perturbation as well as pump power. Coupled nonlinear rate equations including the cavity perturbation …
-
INJECTION LOCKING OF SEMICONDUCTOR LASERS
… threshold or equivalently, where the output intensity of the slave laser is greater than its free-running output intensity. The static locking bandwidth is asymmetrical about zero detuning. The upper static locking boundary is a linear function of injection ratio and is independent of …
-
Untersuchungen zur Optimierung der Transkraniellen Magnetstimulation beim Pferd
… parameter. Standardized settings use device output signal intensities of 100%. The aim of this study was to determine the effect of submaximal stimulation intensities (SI) and to determine the minimum coil output necessary to evoke motor unit potentials (MUP). As an additional effect, lower …
-
Photonic crystal enhancement and tuning of quantum dot emission
… for photonic crystals (PCs) to enhance the output emission and performance of quantum dots (QDs). We integrate visible wavelength emitting QDs within a polymer-based photonic crystal and excite them using an ultraviolet-emitting LED. The PC design incorporates two interleaved regions, each …
-
Optical Analysis and Opto-Mechanical Design for Miniaturized Laser Illumination Module in 3D Areal Mapper
… are filtered and modulated by an SLM. The output intensity can thus be encoded to form any arbitrary pattern through the electronic input applied to the SLM with a high speed. In this thesis, a complete optical diffraction analysis of the system is presented to provide guidelines for the …
-
Extrinsic Fabry-Perot interferometer for surface acoustic wave measurement
… A single-mode fiber, used as the input/output fiber, and a multimode fiber, used mainly as a reflector, form an air-gap that acts as a low-finesse Fabry-Perot cavity. The Fresnel reference reflection from the glass/air interface at the front of the air-gap interferes with the sensing …
-
Fiber Optic Fluid Level Sensor
… configuration show a monotonic decrease of the output intensity as a function of increasing fluid level. As much as a 14 dB change occurs over a one-foot fluid level change. A mathematical model, based on both field theory and geometrical optics, is developed to evaluate and predict the …
-
30 MeV electron beam irradiation effects on GaAs1-xPxLEDS.
… on peak wavelength, absolute and relative light output intensities, and current-forward bias characteristics were studied. A simple model of LED current controlling mechanisms is described and a mathematical approach for deriving a descriptive damage-constant is provided. Observed irradiation …
-
Interactions of Self-Trapped Beams Generated with a Miniature Green Laser in a Photopolymerizable Medium
… miniature green laser with a stable and tunable output intensity. Emission from this laser enabled a systematic examination of self-trapping phenomena at incident intensities spanning 8 orders of magnitude (3.2× W·cm<sup>-2 </sup>to 6368 W·cm<sup>-2</sup>). When launched into a photopolymerizable …
-
Surface-emitting lasers for communications: novel metal-cavity microlasers and high-contrast-grating tunable VCSELs
… the temperature-dependent voltage tunable light output intensity and spectra. Future design and experimental strategies for heterogeneously integrated tunable surface-emitting lasers are discussed.
-
Material process monitoring with optical fiber sensors
… cure, a broadband source is used so the output intensity of the sensor is amplitude-modulated as the refractive index of the composite is increased during the polymerization process. Post-cure, a coherent light source is implemented so a. sinusoidal variation of the output signal occurs …
-
OPTICAL FEEDBACK EFFECTS IN EXTERNAL CAVITY SEMICONDUCTOR LASERS
… found to explain the experimentally observed output intensity undulations and spectral changes of semiconductor lasers when the pumping current is varied above the threshold current. Finally, double cavity semiconductor laser is investigated and found to have significant effects on the phase …
-
Optimal UV Illumination Parameters to Discern Fluorescent Orthodontic Adhesive Remnants During Debonding
… lens (average - X, narrow - N, zoom - Z), UV output intensity (10 and 20 mW/cm2), working distance (20, 50, 150, and 300 mm), and angulation (15°, 30°, 45°, 60°, and 70˚ respective to the horizontal plane). The images were then converted to 8-bit gray scale and analyzed for relative …
-
Molecular Beam Epitaxy of Gallium Arsenide Antimonide-Based Ultra-High-Speed Double Heterojunction Bipolar Transistors and Light Emitting Transistors
… of ∼1.6 mum, despite of its low light output intensity. The potential and limitation of realizing a transistor laser with an emission wavelength of 1.55 mum using GaAsSb/InP material system will be discussed.
-
Short-external-cavity near-infrared diode lasers for use in molecular spectroscopy
… employed interference fringes in the laser output intensity distribution to produce a discriminating signal used in an electrical feedback loop to maintain the external cavity at the optimum length for single-mode operation. Control theory was used to optimize the operation of this feedback …
-
Planar waveguide enzyme sensors coated with nanocomposite membranes for water pollution monitoring.
… studied by in-situ monitoring the changes in output intensity of the planar waveguide. The results were remarkable, since traces of the above pollutants were detected with concentrations as low as to 1 ppb.The work was also extended to design and implement a laboratory scale enzyme sensor …
Page 1 of 3