Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"Output matching network"”.
-
CMOS RF transmitter front-end module for high-power mobile applications
… T/R switch topology with the multi-section PA output matching network - is also proposed. The multi-stage PA output matching network assists to relieve the voltage stress over the switch device even more, by providing a low switch operating impedance. By analyzing the power performance and …
-
A Colpitts Oscillator Design Technique Using S-Parameters
… three functional blocks: 1) an unstable active network (which includes the transistor, feedback capacitor, and input resistor); 2) an output matching network (which includes the inductor, tuning capacitor, and load); and, 3) an input matching network (which consists of the remaining tank …
-
An Adaptive, Linear, High Gain X-Band Gallium Nitride High Power Amplifier
… power amplifier and three-bit reconfigurable output matching network topology is implemented in a coplanar waveguide design within a 4 mm x 2 mm area using a 500 nm AlGaN/GaN process. Simulations show an output power of 34 dBm with PAE of 33 % and gain of 23 dB at the 1 dB compression point, …
-
A highly linear and efficient out-phasing transmitter for multi-band, multi-mode applications
… and narrow frequency bandwidth due to output matching network of switching power amplifier. In this thesis, some state-of-the-art techniques for solving the problems of LINC transmitters are presented. An unbalanced phase calibration technique compensates amplitude/phase mismatches …
-
Digitally enhanced CMOS RF transmitter with integrated power amplifier
… current biasing of the Class-B PA and a low-loss output matching network using high-Q bondwire inductances in the package. Assisted by an integrated feedback path, a two-dimensional, digital look-up table (2-D LUT) adapted by complex gradient-descent algorithms compensates the I/Q mismatch and …
-
Millimeter-Wave Wideband Mach-Zehnder Modulator Driver Design in CMOS Technology
… resonator (MCR) for wideband impedance matching and a programmable linearizer for nonlinear distortion compensation. Fabricated in TSMC 28nm CMOS, the driver delivers a 2.5Vpp swing at 180mW power. Measurements with an external MZM show that linearization improves the 1 dB compression …
-
Characterization of various types of power amplifiers
… Moreover, a conventional class E power amplifier output matching network will be designed using ADS (Advanced Design System) with the simulation results. Furthermore, basic power amplifier measurement will be performed using VNA, NVNA, and PSA.
-
Reconfigurable RF Front End Components for Multi-Radio Platform Applications
… RF circuits can decrease the circuit size and output ports, which can help solve board size limitation, and isolation and antenna switch insertion loss issues.</p> <p>To validate the idea that reconfigurable antennas and reconfigurable RF circuits are a viable option for multi-service …
-
Integrated Transmitters for Cellular User Equipment–Wideband CMOS Power Amplifiers and Antenna Impedance Tuners
… by a concept called adaptive antenna impedance matching. This compensates for antenna loading effects, so that the electronics inside the cellphone can still operate with a close to optimum impedance, although the antenna impedance is changed due to user interaction. For adaptive impedance …
-
Analysis of the potential of gallium nitride based monolithic power amplifiers in the microwave domain with more than an octave bandwidth
… the attainable reflection coefficient for a matching network compensating the reactance of a single transistor in a given frequency band. A detailed analysis of the Bode-Fano criterion is performed for the input and output of GaN based HEMTs. <br> <br>The challenge in designing broadband …
-
High efficiency broadband power amplifiers using SiGe HBT BiCMOS technology
… solution. To overcome an inherent efficiency and output power limitations of conventional distributed amplifiers for wideband applications, one part of this research provides two design examples of SiGe HBT non-uniform distributed power amplifier (NDPA) and develops novel and systematic design …
-
High-Efficiency Millimeter-Wave Front-Ends for Large Phased-Array Transmitters
… and a two-stage linear power amplifier with output power of 12 dBm is described. It is fabricated using 0.13 $\mu m$ SiGe technology. This chip serves as the RF core of a beam-former chip with eight outputs for feeding a 2$\times$2 dual-feed sub-array. Such sub-arrays are used as part of …
-
Information theoretic analysis design of antenna systems
… in the context of the the single-input single-output (SISO) wireless systems. In the second part, the extension is made to study multiple-input multiple-output (MIMO) wireless systems, as well as provide some guidelines for practical implementation. In the SISO setting, to obtain the …