Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 79 for “"Output torque"”.

  1. Torque control of a separate excitation DC motor for a dynamometer

    … current (DC) motor and profile of the motor's torque versus rotor speed is studied. The torque versus rotor speed profile results are predictably linear at a given armature voltage. Output torque of a separate-winding excitation DC motor is proportional to the armature current. From this …

    nps Repository record for Torque control of a separate excitation DC motor for a dynamometer (opens in a new tab)

  2. Dynamic Simulation of An Impact Mechanism for a Pneumatic Tool

    … contained within the wrench, transforms the torque from the tool's air motor into radial impact pulses that tighten or loosen fasteners. The design variables of the mechanism that affect the output torque delivered to the fastener are not well understood. The current method of analyzing an …

    marquette Repository record for Dynamic Simulation of An Impact Mechanism for a Pneumatic Tool (opens in a new tab)

  3. Real-time Model-based Estimation of Transfer Case Clutch Parameters and Traction Torque

    … case clutch parameters and wheel traction torque with improved accuracy for a 4-Wheel-Drive (4WD) vehicle.Transfer case clutch, distributing the traction torque between front and rear tires, is a key component for 4WD vehicle propulsion system. When the clutch is disengaged, driving torque …

    msu Repository record for Real-time Model-based Estimation of Transfer Case Clutch Parameters and Traction Torque (opens in a new tab)

  4. Design and Analysis of a Parallel-Elastic-Actuator-Based Robotic Upper Trunk Training Device

    … of the ROBUTS are developed and used in the output torque control, where the actuator's motor angle is generated by the models to output a desired torque at a given trunk posture. A mechanism of friction torque in the planetary gear set is proposed, which illustrates differences in the …

    alabama Repository record for Design and Analysis of a Parallel-Elastic-Actuator-Based Robotic Upper Trunk Training Device (opens in a new tab)

  5. Three-Phase 24/16 Switched Reluctance Machine for Hybrid Electric Powertrains: Design and Optimization

    … angles affect SRMs’ performances, such as output torque, torque ripple, and efficiency. In this thesis, a fast optimization-based procedure for automatically characterizing SRM performances is proposed. Within the procedure, four optimization problems, including two single-objective and two …

    mcmaster Repository record for Three-Phase 24/16 Switched Reluctance Machine for Hybrid Electric Powertrains: Design and Optimization (opens in a new tab)

  6. Development and Analysis of Interior Permanent Magnet Synchronous Motor with Field Excitation Structure

    … air-gap flux for the purpose of achieving higher torque by increasing the air-gap flux at low speed and wider operating speed range by weakening the flux at high speed.</p> <p>On the process of developing the new IPMSM, the following analysis results are presented. Firstly, a new analytical method …

    utk-theses Repository record for Development and Analysis of Interior Permanent Magnet Synchronous Motor with Field Excitation Structure (opens in a new tab)

  7. Analysis Of A Dual Scissored-Pair,variable-Speed, Control Moment Gyroscope Driven Spherical Robot

    … offset designs can produce a low, continuous output torque, whereas CMG based designs can usually only produce a high, momentary output torque. The second objective was to develop a CMG based design that has the potential to outperform current state barycenter offset based designs. A design …

    wayne-thes Repository record for Analysis Of A Dual Scissored-Pair,variable-Speed, Control Moment Gyroscope Driven Spherical Robot (opens in a new tab)

  8. Dynamic modeling and feedback control with mode-shifting of a two-mode electrically variable transmission

    … those models that is capable of meeting driver torque demands and performing synchronous mode shifts between different EVT modes while also accommodating preferred engine operating points. The two-input two-output transmission controller proposed herein incorporates motor-generator dynamics, is …

    gatech Repository record for Dynamic modeling and feedback control with mode-shifting of a two-mode electrically variable transmission (opens in a new tab)

  9. Design aspects of high performance synchronous reluctance machines with and without permanent magnets

    … On the one hand, the SRMs have problems of torque ripple, vibrations and noise. In addition, their control is more complicated than that of three-phase conventional motor drives, a.o. because of the high non-linearity of the inductance. On the other hand, the SynRMs have a low power factor, …

    ghent Repository record for Design aspects of high performance synchronous reluctance machines with and without permanent magnets (opens in a new tab)

  10. Design and Analysis of New Concept Interior Permanent Magnet Synchronous Motor by 3D Finite Element Analysis

    … coils and flux paths, which can increase the output torque and be controlled for field weakening operating. The analysis has been conducted by three-dimensional Finite Element Analysis. The results show the possibility of the new motor for HEV applications. The new motor has several …

    ut-knoxville Repository record for Design and Analysis of New Concept Interior Permanent Magnet Synchronous Motor by 3D Finite Element Analysis (opens in a new tab)

  11. Novel hybrid permanent magnet interior PM synchronous machines

    … emphasis on enhancement of the ratio of torque to REPM volume. Six HPM interior PM synchronous machines (IPMSMs) with different topologies using symmetrical and asymmetric rotor structures have been developed and investigated in this thesis. The electromagnetic performance, including open …

    whiterose Download PDF for Novel hybrid permanent magnet interior PM synchronous machines (opens in a new tab)

  12. Design Optimization of SynRM with ALA Rotor Configuration

    … of this optimization is to minimize the torque ripple, and ohmic and core losses while maximizing the output torque to ensure high acceleration and smooth operation. Furthermore, this model will enable the SynRM motor to easily interact in real time with the control unit of the …

    marquette Repository record for Design Optimization of SynRM with ALA Rotor Configuration (opens in a new tab)

  13. Design Optimization of SynRM with ALA Rotor Configuration

    … of this optimization is to minimize the torque ripple, and ohmic and core losses while maximizing the output torque to ensure high acceleration and smooth operation. Furthermore, this model will enable the Syn RM motor to easily interact in real time with the control unit of the …

    marquette Repository record for Design Optimization of SynRM with ALA Rotor Configuration (opens in a new tab)

  14. Optimal synthesis of a planar four-bar mechanism with prescribed timing using generalized reduced gradient, simulated annealing and genetic algorithms

    … included to ensure no less than 180∘ of angular output. Additionally, equations of static equilibrium and virtual work expressions are implemented to ensure a consistent sense of output torque on the linkages driven member; this assures that the direction of motion of the mechanism does not …

    iastate Repository record for Optimal synthesis of a planar four-bar mechanism with prescribed timing using generalized reduced gradient, simulated annealing and genetic algorithms (opens in a new tab)

  15. Analysis on actuator dynamics in active wheelsetcontrol

    … key actuator performance indicators such as output torque and power consumption. This analysis provides insight in to the task of finding optimal actuator parameter values for this particular application of active wheelset control such that the effectiveness, efficiency and robustness of the …

    salford Download PDF for Analysis on actuator dynamics in active wheelsetcontrol (opens in a new tab)

  16. Emulating Balance Control Observed in Human Test Subjects with a Neural Network

    … modeled by a PD controller with a time delay and output torque positive feedback. For this model, angular position is measured at the ankle and corrective torque is applied about the joint to maintain a vertical orientation. In this paper, we construct a neural network that performs addition, …

    portland-state Repository record for Emulating Balance Control Observed in Human Test Subjects with a Neural Network (opens in a new tab)

  17. An Investigation of Compliant Over-running Ratchet and Pawl Clutches

    … in compression to get the largest amount of output torque. It was found that com-pliant mechanism theory can be used to design ratchet and pawl clutches with fewer parts and lower manufacturing and assembly costs, and that these clutches perform comparable to traditional rigid-body ratchet …

    byu Repository record for An Investigation of Compliant Over-running Ratchet and Pawl Clutches (opens in a new tab) Download PDF for An Investigation of Compliant Over-running Ratchet and Pawl Clutches (opens in a new tab)

  18. Prototyping and characterization of an adjustable skew angle single gimbal control moment gyroscope

    … this project is capable of delivering 7.79 Nm of output torque at the standard gimbal rate of 1 rad/s. The CMG power consumption ranges between 50W and 100W. 4. SUBJECT TERMS Control Moment Gyroscope, Control Moment Gyro, gimbal, momentum wheel, momentum wheel assembly, skew angle, adjustable skew …

    nps Repository record for Prototyping and characterization of an adjustable skew angle single gimbal control moment gyroscope (opens in a new tab)

  19. Cyber-Threat Detection Strategies Governed by an Observer and a Neural-Network for an Autonomous Electric Vehicle

    … Each motor is controlled using the Direct-Torque control motor control scheme that provides fast output torque response time. This vehicle is controlled via multiple layers of control. A Model Predictive Control Layer is used to discern what lateral trajectory commands minimize the …

    clemson Repository record for Cyber-Threat Detection Strategies Governed by an Observer and a Neural-Network for an Autonomous Electric Vehicle (opens in a new tab)

  20. Emulation of Wind Power with a DC Machine to Provide Input to a Doubly-Fed Induction Machine

    … machine (DFIM) is studied in this thesis. The output torque of the DC motor is computed in the simulation under controlled parameters. The input to the DFIM, used as a doubly-fed induction generator (DFIG), is taken from the DC motor. In theory, the combination of the two machines can be used …

    nps Repository record for Emulation of Wind Power with a DC Machine to Provide Input to a Doubly-Fed Induction Machine (opens in a new tab)

Page 1 of 4