Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"Over-height"”.
-
Vulnerability assessment and performance improvement strategies for bridges subjected to vehicular collision
… involves the design of superstructures for over-height vehicle collision. The ESF design value specified by the Eurocode is 500 kN (112 kip), and this value was obtained by utilizing the formula for hard impact. This design value does not consider the characteristics of the impacting …
-
Truck height determination using digital video
Over-height trucks are not only a hazard to the over-height trucks themselves, but they pose a threat to the bridges they come into contact with, and most importantly the other drivers on the road way when a collision takes place with a low clearance structure. Therefore, there is a need for an …
-
Evaluation of the Performance of Bridge Steel Pedestals under Low Seismic Loads
Many bridges are damaged by collisions from over-height vehicles resulting in significant impact to the transportation network. To reduce the likelihood of impact from over-height vehicles, steel pedestals have been used as a cost-effective, efficient means to increase bridge clearance heights. …
-
Experimental and Analytical Study of Dynamic Behavior of Bridge Superstructures Subjected to Overheight Vehicle Collisions
<p>The increasing occurrence of over-height vehicle collisions with bridges in the United States leads to concern about the damage due to lateral impact to bridge superstructures by over-height vehicles. However, this issue is not fully addressed in current bridge specifications. Previous …
-
Lateral impact response for prestressed concrete girder bridges with intermediate diaphragms
… concerned with the impact damage produced by an over-height vehicle striking the girders of a prestressed concrete (PC) girder bridge. When a bridge is struck by an over-height vehicle, usually the exterior and in some instances one or more of the remaining girders are damaged. The effect of …
-
Dynamic Response, Assessment, and Retrofitting of Prestressed Concrete Bridge Girders Subjected to Lateral Impact Loads
Over height vehicle collisions pose a growing threat to the resilience of bridge infrastructure across the United States. According to the American Road & Transportation Builders Association (ARTBA, 2024), approximately 36% of all U.S. bridges require major repair or replacement, with an estimated …
-
Laser scan point cloud processing for displacement measurements of damaged steel I-girders
Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2024-09-16 without embargo terms
-
Extracting the strain-softening response of composites using full-field displacement measurement
… damage properties (e.g. fracture energy, damage height) of quasi-brittle materials. In the absence of a direct methodology, one has to conduct multiple experiments combined with trial-and-error procedures and/or simplifying assumptions regarding the damaging behaviour of the material in order to …
-
Finite Element Analysis Workflow for Heat Straightening of Impact-Damaged Steel Bridges
Impacts between over-height vehicles and steel bridges are common throughout North America and the resulting bridge damage is unpredictable and sudden. Heat straightening is an alternative to replacing steel members and mechanical straightening for repairs. In many cases, bridges remediated using …
-
Slab-on-girder prestressed concrete bridges: linear and nonlinear finite element analysis and experimental load tests
… of a bridge, are thought to contribute to the overall distribution of live loads in bridges. Cast-in-place concrete intermediate diaphragms were investigated in this study in order to assess their load distribution effectiveness in prestressed concrete I-girder bridges. Finite element packages …
-
On The Use Of Innovative Techniques To Evaluate The Health Of Structural Systems
… the reserve capacity in bridges damaged by over-height truck strikes. Terrestrial laser scanning systems are employed to record the damaged geometry of the bridge and image-processing techniques are used to create corresponding solid models. These solid models are then integrated into finite …
-
An engineering approach to the simulation of gross damage development in composite laminates
… single edge notched, double edge notched, over-height compact tension, centre notched, and centre hole tension tests has been examined and compared to experiments. Additionally, the development of damage in two bending applications has been studied. The performance of the model in …
-
Failure of Notched Stiffened Structures Under Tension
… the accuracy of the modelling method. Stiffened over-height compact tension (OCT) specimens made from Hexcel IM7/8552 pre-preg were designed and manufactured to experimentally determine the fracture behaviour and damage mechanism. Compact tension and extended single-edge notched tension (ESET) …
-
Mechanisms of axis-switching and saddle-back velocity profile in laminar and turbulent rectangular jets
… aspect-ratio (AR), defined as the ratio of width over height, laminar rectangular jets with <italic>AR=1</italic> (square jet), 1.5, 2, 2.5, and 3. Focuses are on various flow properties on transverse planes downstream to investigate the correlation between the streamwise velocity and secondary …
-
The future of Colorado forests: assessing seedling performance under climate change
… growth, prioritization of growth to either height or basal area, and survivorship. I show that growth was unambiguously accelerated by warming across the gardens, favoring fast-growing angiosperm over the conifers. Each species preferentially allocated resources to basal area over height, an …