Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"Overall buckling"”.

  1. Consequences of Simultaneous Local and Overall Buckling in Stiffened Panels

    … improved expressions for elastic local plate buckling and overall panel buckling of uniaxially compressed T-stiffened panels are developed and validated with 55 ABAQUS eigenvalue buckling analyses of a wide range of typical panel geometries. These two expressions are equated to derive a new …

    vt Repository record for Consequences of Simultaneous Local and Overall Buckling in Stiffened Panels (opens in a new tab)

  2. Local and overall buckling of thin-walled beams and columns using finite elements

    … in civil engineering structures. In addition to overall instability, (Euler buckling, torsional buckling, lateral-torsional buckling, etc.), the thin plates making up the cross section may themselves be susceptible to local plate buckling. The possible interaction of these two modes of buckling …

    ubc Repository record for Local and overall buckling of thin-walled beams and columns using finite elements (opens in a new tab) Download PDF for Local and overall buckling of thin-walled beams and columns using finite elements (opens in a new tab)

  3. Buckling Analysis of Composite Stiffened Panels and Shells in Aerospace Structure

    … panels and shells may significantly increase the overall buckling load of the resultant stiffened structure. Initially, an extensive literature review was conducted over the past ten years of published work wherein research was conducted on grid stiffened composite structures and stiffened panels, …

    vt Repository record for Buckling Analysis of Composite Stiffened Panels and Shells in Aerospace Structure (opens in a new tab)

  4. Analysis and retrofitting of fixed steel platforms under low seismic loads

    … and tested to study the effects of CFRP on overall buckling behavior. The results show that CFRP effectively increases the axial strength and stiffness of steel braces. Finally, two retrofitting methods, one with high strength grout and the other with CFRP are used to enhance the performance …

    nus Repository record for Analysis and retrofitting of fixed steel platforms under low seismic loads (opens in a new tab) Download file for Analysis and retrofitting of fixed steel platforms under low seismic loads (opens in a new tab)

  5. Effect of Fiber Reinforced Plastic on Plywood and Plywood Sandwich Panels Using Finite Element Analysis

    … was changed in the model to achieve the desired overall bending stiffness. The plywood model was compared to midspan deflection predicted by a procedure presented by March (1942) and test data (APA, 1972). The FRP coating has increased the stiffness significantly (23% as compared to 8%) in the …

    sdstate Repository record for Effect of Fiber Reinforced Plastic on Plywood and Plywood Sandwich Panels Using Finite Element Analysis (opens in a new tab)

  6. Buckling analysis of structures with corrosion under insulation

    … material's mechanical properties on the overall buckling strength of a steel structure. Very little research has been completed that focuses on the effect of different materials on the overall buckling value at varying stages of corrosion. It is expected that this thesis will act as the …

    strathclyde Repository record for Buckling analysis of structures with corrosion under insulation (opens in a new tab)

  7. Compressive behavior of laminated composite structures

    … the cause of the failure may be due to local buckling of the composite plies. In this dissertation, a ply buckling model is studied to assist in the understanding of the failure mechanisms. In order to find the failure envelope, inplane fracture and overall buckling are assumed as the failure …

    nebraska Repository record for Compressive behavior of laminated composite structures (opens in a new tab)

  8. The generalised beam theory with finite difference applications

    … and cross section distortion (including localbuckling). The method is such that the four rigid body modes are automatically identified and separated from the remaining cross section distortion modes. The second part of this Thesis develops a finite difference method of analysis, in conjunction …

    salford

  9. Computerized Analysis of Wire Rope Supported Lattice Crane Boom

    … These types of failure are as follows: 1.) Overall buckling (in-plane or out-of-plane) of the boom cosidered [sic] as a beam - column. 2.) Local buckling of the lattice-supported boom chords. 3.) Exceeding a prescribed maximum allowable boom deflection. 4.) Exceeding a prescribed maximum …

    marquette Repository record for Computerized Analysis of Wire Rope Supported Lattice Crane Boom (opens in a new tab)

  10. Structural Behaviour of Steel Columns and Steel-Concrete Composite Girders Retrofitted using CFRP

    … to be suitable for controlling outwards local buckling in HSS short columns, while longitudinal layers were more effective in controlling overall buckling in slender columns. The maximum increases in axial strength observed in the experiments were 18 and 71 percent, for short and slender …

    queens Repository record for Structural Behaviour of Steel Columns and Steel-Concrete Composite Girders Retrofitted using CFRP (opens in a new tab)

  11. Υπόγειοι χαλύβδινοι αγωγοί με εύκαμπτους κόμβους υπό διάρρηξη σεισμικού ρήγματος

    … the risk of tensile fracture and local buckling, instead of aiming at reducing pipe – soil friction, which is the case for the commonly used mitigating measures.Based on the shortcomings identified in the existing literature and the modern design and construction practice regarding the …

    greece Repository record for Υπόγειοι χαλύβδινοι αγωγοί με εύκαμπτους κόμβους υπό διάρρηξη σεισμικού ρήγματος (opens in a new tab)

  12. Mechanical properties, residual stresses and structural behavior of thin-walled stainless steel profiles

    … columns failing by combined distortional and overall flexural-torsional buckling and the results are compared to tests. Indeed, full-scale tests on cold-formed stainless steel lipped channel section columns were achieved in the Structures Laboratory of the University of Liège. And, once …

    liege Repository record for Mechanical properties, residual stresses and structural behavior of thin-walled stainless steel profiles (opens in a new tab)

  13. Buckling Behavior Of Metallic Thin-Walled Stiffened Cylindrical Shells Under Static Loading

    This thesis aims to estimate and improve the buckling strength of the cylindrical storage tanks under static loadings. Initially, for the verification of the overall performance of the numerical modeling approach; a computational analysis was conducted to calculate the linear buckling behaviour of …

    nodak Repository record for Buckling Behavior Of Metallic Thin-Walled Stiffened Cylindrical Shells Under Static Loading (opens in a new tab)

  14. Multidisciplinary Optimization and Damage Tolerance of Stiffened Structures

    … the local panels to increase the stiffness and buckling resistance. The panel thickness, size and shape of stiffeners are optimized to minimize the structural weight. The geometry of spars and ribs greatly influences the design of stiffened panels. During the local panel optimization, the stress …

    vt Repository record for Multidisciplinary Optimization and Damage Tolerance of Stiffened Structures (opens in a new tab)

  15. DESIGN METHODS FOR LARGE RECTANGULAR INDUSTRIAL DUCTS

    … restrained tension flange lead to distortional buckling of the stiffeners. The current methods do not address distortional buckling adequately. A parametric study on dimensionless parameters governing the behaviour and strength of stiffened plat panels was conducted. The study indicated that the …

    mcmaster Repository record for DESIGN METHODS FOR LARGE RECTANGULAR INDUSTRIAL DUCTS (opens in a new tab)