Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Overset Mesh"”.

  1. Hydrodynamic Interaction and Steering of Ships in Confined Waterways using Overset Mesh

    … focuses on the use of OpenFOAM together with overset mesh and the Volume of Fluid method to model free-surface flow and moving vessels. A numerical simulation strategy is developed in several stages, starting from a single-hull case in a channel and progressing toward a two-hull meeting …

    chalmers Repository record for Hydrodynamic Interaction and Steering of Ships in Confined Waterways using Overset Mesh (opens in a new tab)

  2. CFD driven design and optimization of a natural gas engine inlet manifold using overset mesh

    … transient valve behaviour was developed using an overset mesh approach, allowing accurate replication of the pulsating gas dynamics within the manifold. The simulation results were used to refine and optimize the secondary duct of the inlet manifold, focusing on minimizing the pressure drop and …

    chalmers Repository record for CFD driven design and optimization of a natural gas engine inlet manifold using overset mesh (opens in a new tab)

  3. Motion Decay of a Floating Object

    … converter. In this project three different meshing methods were tested, to see how efficient and accurate they are. The different meshing techniques were overset, sliding, and a deforming mesh technique, the different methods also required different case setups which is presented in this …

    chalmers Repository record for Motion Decay of a Floating Object (opens in a new tab)

  4. CFD Modeling of an Oscillating Wave Surge Converter using the Overset Grid Method

    … number of challenges related to model geometry, mesh quality, and solution stability. The high degrees of rotation experienced by these devices make typical mesh-morphing methods untenable. Alternative methods for dealing with the large mesh deformation issues have been devised and implemented; …

    washington Repository record for CFD Modeling of an Oscillating Wave Surge Converter using the Overset Grid Method (opens in a new tab)

  5. Implications of Shallow Water in Numerical Simulations of a Surface Effect Ship

    Overset, or Chimera, meshes are used to discretize the governing equations within a computational domain using multiple meshes that overlap in an arbitrary manner. The overset meshing technique is most applicable to problems dealing with multiple or moving bodies. Deep water simulations were …

    vt Repository record for Implications of Shallow Water in Numerical Simulations of a Surface Effect Ship (opens in a new tab)

  6. Aerodynamic investigation of a vehicle in highly turbulent flow

    … using the κ−ω SST turbulence model with an overset mesh technique to accurately resolve the unsteady interaction between the moving airfoils and the freestream. The simulations analyzed characteristic parameters including turbulence intensity, turbulent length scale distributions, and …

    chalmers Repository record for Aerodynamic investigation of a vehicle in highly turbulent flow (opens in a new tab)

  7. Multi-rate time integration on overset meshes

    … or multiscale spatio-temporal features, overset meshes can be effectively used. However, in the case of overset problems in which one or more of the meshes vary significantly in resolution, standard explicit time integrators limit the maximum allowable timestep across the entire …

    uiuc Repository record for Multi-rate time integration on overset meshes (opens in a new tab)

  8. Improved Design Method for Cambered Stepped Hulls with High Deadrise

    … series of validation studies utilizing fixed and overset meshes led to a final simulation set up with an overset mesh that allowed for accurate prediction of drag, trim moment, wetted keel length, and the wake profile aft of the cambered planing surface. The database is fitted such that the final …

    vt Repository record for Improved Design Method for Cambered Stepped Hulls with High Deadrise (opens in a new tab)

  9. Unsteady Interior Climate Simulation of Electric Buses

    … the doors in the simulation is obtained by using overset mesh methodology. The model is built with one extreme weather condition of -8.3 C. The results from steady state describing the flow behaviour of the interior climate and the effect of door opening cycle on the interior climate from unsteady …

    chalmers Repository record for Unsteady Interior Climate Simulation of Electric Buses (opens in a new tab)

  10. Discrete element simulation for the loading of a steep incline side wall conveyor

    … into the simulation with the use of the overset mesh tool. The validation of the simulation model was done with the use of high speed camera footage of the loading point. Three categories of validation were established, namely particle speed assessment, particle trajectory assessment and …

    nwu-za Repository record for Discrete element simulation for the loading of a steep incline side wall conveyor (opens in a new tab)

  11. A Coupled CFD/CSD Investigation of the Effects of Leading Edge Slat on Rotor Performance

    … so-called Implicit Hole Cutting method for inter-mesh connectivity, implementing a generalized force transfer routine for transferring LE-Slat loads onto the main blade, and achieving increased parallelization of the code. Initially, the structured overset mesh CFD solver is extensively validated …

    maryland Repository record for A Coupled CFD/CSD Investigation of the Effects of Leading Edge Slat on Rotor Performance (opens in a new tab)

  12. Aerodynamic Investigations of Vehicles under High Side Wind Conditions on Bridges

    … the motion of a truck across the bridge by using overset mesh methodology. The simulations are run for 30, 60 and 90 degree yaw conditions. The CFD investigations showed that the presence of deck and windshield(non-porous and solid) reduces the side force acting on the truck by diverting the flow …

    chalmers Repository record for Aerodynamic Investigations of Vehicles under High Side Wind Conditions on Bridges (opens in a new tab)

  13. Analysis of FSI effects for a novel WEC using high-fidelity simulations

    … of the mooring line material and size. A mesh independence study is done to ensure the results of the study are mesh independent. The different wave generation models, the fifth order Stokes wave and irregular wave models are considered, with the irregular wave model being found more …

    chalmers Repository record for Analysis of FSI effects for a novel WEC using high-fidelity simulations (opens in a new tab)

  14. Výpočtová a experimentální analýza cyklu peristaltického čerpadla využívaného v klinických aplikacích

    Peristaltic pumps (PP) play a critical role in various clinical applications such as dialysis, cardiopulmonary bypass, and extracorporeal membrane oxygenation, offering reduced haemolysis rates and fewer complications compared to centrifugal pumps. This study presents a comparative analysis of two …

    brno-tech Repository record for Výpočtová a experimentální analýza cyklu peristaltického čerpadla využívaného v klinických aplikacích (opens in a new tab)

  15. Development of a Simplified CFD Model for In-Cylinder Flow in Two-Stroke Engines

    … the size and complexity of the domain. The mesh is also examined to assess which areas can be coarsened and thereby reduce the number of cells. Furthermore the physics setup and time discretization of the simulation is studied. These are modified by increasing the time step and changing a …

    chalmers Repository record for Development of a Simplified CFD Model for In-Cylinder Flow in Two-Stroke Engines (opens in a new tab)

  16. Propeller Noise Prediction of an Urban Air Mobility Vehicle in Urban Environment

    … This section explores the application of the Overset mesh method for propeller simulations in OpenFOAM and compares its performance against the Arbitrary Mesh Interface (AMI) approach in OpenFOAM. While AMI has been extensively validated for rotor acoustics, it is limited in handling large …

    embry-riddle Repository record for Propeller Noise Prediction of an Urban Air Mobility Vehicle in Urban Environment (opens in a new tab)

  17. Investigation of Numerical Approaches to Analyze Flapping Wings

    … include: (a) library-based approach for adding overset capability to handle large relative motion between different objects. This approach encapsulates data transfer across multiple layers of mesh; and (b) use of generalized mesh for handling complex geometries. Different interpolation methods …

    uab Repository record for Investigation of Numerical Approaches to Analyze Flapping Wings (opens in a new tab)