Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 85 for “"Oxide coating"”.
-
Rare Earth Oxide Coating with Controlled Chemistry Using Thermal Spray
Cerium oxide (Ceria) at nano scale has gained significant attention due to its numerous technological applications. Ceria in both doped and undoped forms are being explored as oxygen sensor, catalysis, protective coating against UV and corrosion, solid oxide fuel cell (SOFC) electrolyte and newly …
-
Towards reliable quantification of mixed oxide coating for LIGO using DualEELS
… are developed and presented. Highly reflective coating materials for the interferometer mirrors are selected based on their thermal/mechanical properties. It is a well-established fact that the mechanical bulk properties are directly connected to the thermal quantum noise, which is the parameter …
-
ELECTROLYTIC DEPOSITION OF MgO ON STAINLESS STEEL SUBSTRATE
… was to fabricate and characterize magnesium oxide coating on stainless steel alloy (SAE 316L). Electrolytic processing, followed by sintering was used for making it. Coating the heater tubes used in refinery industry with magnesium oxide is expected to increase the oxidation and corrosion …
-
Pool Boiling of FC 770 on Graphene Oxide Coatings: A Study of Critical Heat Flux and Boiling Heat Transfer Enhancement Mechanisms
… particular interest was the effect of graphene-oxide platelets, dip-coated onto the heater surface, in enhancing the nucleate boiling heat transfer (BHT) rates and the critical heat flux (CHF) value. In the course of the pool boiling experiment, the primary focus was on the reduction mechanism …
-
Oxide-coated vertically aligned carbon nanotube forests as thermal interface materials
… A recent report suggests that nanoscale oxide coatings could be applied to CNTs in forests without changing the mechanical deformation behavior of the forests. Oxide coatings could also provide environmental stability as well as better adhesion to the substrate compared to pristine CNT …
-
Work Function Study of Iridium Oxide and Molybdenum Using UPS and Simultaneous Fowler-Nordheim I-V Plots with Field Emission Energy Distributions
… emission stability for molybdenum and iridium oxide coatings was examined. Single emission tips and flat samples of molybdenum and iridium oxide were prepared for characterization. The flat samples were characterized using X-ray Photoelectron Spectroscopy and X-ray diffraction to determine …
-
Development of SOFC anodes resistant to sulfur poisoning and carbon deposition
… dense Ni-YSZ anode was modified with a thin-film coating of niobium oxide (Nb2O5) in order to understand the mechanism of sulfur tolerance and the behavior of carbon deposition. Results suggest that the niobium oxide was reduced to NbO2 under operating conditions, which has high electrical …
-
The Thermal Stability of Anodic Oxide Coatings - Strength and Durability of Adhesively Bonded Ti-6Al-4V Alloy
… time. The bond fails increasingly in the oxide coating with increasing treatment temperature and time of treatment. Surface analysis results for debonded specimens suggest that the process leading to failure is the formation of fluorine-containing materials within the oxide, which weakens …
-
The deformation of copper whiskers
… tests in dilute sulphuric acid showed that the oxide coating is not solely responsible for the strength of whiskers.
-
Characterization of forestry dry land sort runoff and treatment using a sand filtration process
… filtration or a secondary treatment process. An oxide-coated sand filtration process performed well over three series of' column experiments, removing up to 86% of the COD and 92% of the turbidity, when operated as a re-circulating filter for 24 hours. Batch adsorption experiments using the …
-
Corrosion and corrosion suppression on n-type gallium arsenide semiconductor liquid-junction solar cells
… on the electrode surface. The polyphenylene oxide coating partially suppressed corrosion in acid electrolytes. However, the coatings did not improve hole transfer efficiency in neutral electrolytes.
-
Synthesis and thermoelectric characterization of individual nanowires
… devices. The presence of a highly stable bismuth oxide coating prohibited good electrical contact with the nanowire, but still allowed for thermal conductivity data to be obtained. In addition, theoretical modeling was used to obtain carrier concentration and carrier mobility from the measured …
-
Comparative oxidation study of un-coated and coated CMSX- 4 and CMSX-486 single crystal superalloys
… of an experimental Ni-5Cr-15Al overlay coating applied to CMSX-4 and CMSX-486 was performed at 1100 ℃. High temperature oxidation was carried out in a box furnace for a maximum duration of 192 hrs. Samples were periodically removed and the oxide, coating and substrates microstructurally …
-
Enhancing methanol electro-oxidation by double oxide incorporation with platinum on carbon nanotubes
… on platinum catalyst supported on a double oxide nanocomposite support of tin oxide and carbon-doped titanium dioxide. The Pt-SnO2-C-/CNTs electro catalyst demonstrated about 20% and 44% percent higher forward peak current density than Pt-SnO2/CNTs and E-TEK, respectively. The kinetics of …
-
The preparation and properties of rf-plasma-anodized silicon dioxide thin films and aluminum-silicon Schottky photodiodes
… and physical propeties of the silicon dioxide films have been studied with comparisons being made, whenever possible, to results obtained with films grown by other methods. A novel method to determine the optical properties of thin films from single angle reflectance measurements has been …
-
Developing a high temperature, oxidation resistant molybdenum-silica composite
… and melts to form a self-healing protective oxide coating. Additionally, homogeneously dispersed Mo5SiB2 and/or Mo2B provide boria upon oxidation which reduces glass viscosity and allows flowing glass to coat the surface while remaining solid internally. This is similar to the oxidation …
-
Endpoint detection of silicon wafer etching
… for performing in situ endpoint monitoring of oxide thickness during the etching of silicon wafers. The continuous monitoring of the oxide thickness can be accomplished by analysis of the reflection characteristics of the plane polarized light. This information then allows the etching to be …
-
Low-Cost Continuous Production of Carbon Fiber-Reinforced Aluminum Composites
… of carbon fiber/aluminum composites. Two coatings, alumina and zirconia, were applied to the fibers to protect against interfacial degradation. They were applied using a sol-gel method and common metal salts. The fibers were infiltrated with molten aluminum using an ultrasound sonicator. …
-
Adsorption kinetics for the removal of soluble manganese by oxide- coated filter media
… to examine the kinetics of manganese sorption on oxide-coated filter media. Initial experimentation confirmed the findings of other investigators, the Mn²⁺ sorption capacity of oxide-coated media increases as solution pH increases. Further study revealed that uptake rate kinetics could be …
-
Effect of hydrous oxide coatings on adsorption of oxyanions by clay minerals.
… different levels of each of Fe and Al hydrous oxides. The charge characteristics were determined using potentiometric titration. Adsorption was studied by batch experiment at 11 different concentrations of each of the oxyanions at three different pH levels. Coating with both Fe as well as Al …
Page 1 of 5