Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 100 for “"PA6"”.

  1. Estudo da compatibilização das blendas PP/PA6 e PA6/EPR

    … das blendas de Polipropileno (PP)/Poliamida-6 (PA6) e das blendas Poliamida-6/Borracha Etileno- Propileno (EPR). No primeiro sistema, foi utilizando como agente compatibilizante o PP funcionalizado Polybond 3002 e no segundo sistema, foi utilizando o EPR funcionalizado como agente …

    brazil-ufrgs Repository record for Estudo da compatibilização das blendas PP/PA6 e PA6/EPR (opens in a new tab)

  2. Tailoring PA6 Properties with In-Situ Generated Nanofibrils

    … investigates the enhancement of polyamide 6 (PA6) properties through the incorporation of in-situ generated nanofibrils, focusing on mechanical performance, flame retardancy, and hydrophobicity. The research is divided into three main sections, each addressing a distinct challenge associated …

    toronto-retro Repository record for Tailoring PA6 Properties with In-Situ Generated Nanofibrils (opens in a new tab)

  3. Thermal Degradation of PC and PA6 During Laser Transmission Welding (LTW)

    … materials: polycarbonate (PC) and polyamide 6 (PA6). Each material was studied at two levels of CB. It is shown in this work that increasing the carbon black (CB) level from 0.05 to 0.2wt% has no significant effect on the thermal stability of PA6. However, it is observed that increasing the CB …

    queens Repository record for Thermal Degradation of PC and PA6 During Laser Transmission Welding (LTW) (opens in a new tab)

  4. DESIGN AND PREPARATION OF ELECTRICALLY CONDUCTIVE GRAPHENE NANOCOMPOSITES BASED ON PA6/POE

    Polymer blending is commonly used to engineer materials with favorable properties. Due to the low entropy of mixing, in most cases, polymer blending results in a phase-separated morphology which governs the ultimate properties. Nanoparticles can significantly alter the phase morphology even at low …

    concordia Download PDF for DESIGN AND PREPARATION OF ELECTRICALLY CONDUCTIVE GRAPHENE NANOCOMPOSITES BASED ON PA6/POE (opens in a new tab)

  5. Fusion Bonding Behavior of 3D Printed PA6/CF Composites Via Post Fabrication Compaction

    … with AM composites, as reinforced nylon PA6 with short fibers, parts show more strength along the direction of the filament due to the alignment of the carbon fibers, but weaker in other directions. The proposed method to solve this issue is to print parts separately and join them …

    odu Repository record for Fusion Bonding Behavior of 3D Printed PA6/CF Composites Via Post Fabrication Compaction (opens in a new tab)

  6. Process Engineering and Performance of Sustainable Polyamide 6 (PA6) Based Blends and Biocomposites

    … thermoplastic blends were fabricated using PA6 and poly (butylene terephthalate) (PBT) and, upon optimization, they were reinforced with biocarbon and other conventional fillers. A twin-screw extruder and injection molder were used to produce the blends compatibilized blends, and …

    guelph Repository record for Process Engineering and Performance of Sustainable Polyamide 6 (PA6) Based Blends and Biocomposites (opens in a new tab)

  7. Manufacture of laser textured steel-Carbon/PA6 hybrids using laser assisted automated tape placment

    … executed, in a first step, with an additional PA6 film interlayer between the composite and the metal and in a second step without an interlayer, directly on the steel. The impact of distinct surface structures on the manufacturing process was analysed with thermal imaging and thermocouple …

    anu Repository record for Manufacture of laser textured steel-Carbon/PA6 hybrids using laser assisted automated tape placment (opens in a new tab)

  8. Resistência ao desgaste dos sistemas POM/Al6063 T5 e PA6 20% fibra de vidro/Al6063 T5

    … de dois materiais polioximetileno (POM) e PA6 com 20% de fibra de vidro, contra uma superfície da liga Al 6063 T5, utilizando tribômetro na configuração ball-on-plate. Além disso, será realizado um teste em escala real que simula as condições reais de aplicação (teste funcional), visando …

    brazil-ufrgs Repository record for Resistência ao desgaste dos sistemas POM/Al6063 T5 e PA6 20% fibra de vidro/Al6063 T5 (opens in a new tab)

  9. Polyamide 6 fibre recycling by twin-screw melt extrusion of mixed thermoplastic polymers

    … the potential on upcycling polyamide 6 (PA6) polymer mixed with secondary polymers via one-step twin-screw melt extrusion. Three secondary polymers were chosen in this study; thermoplastic polyurethane (TPU) which has interaction with PA6, and two polymers which do not have interaction …

    whiterose Download PDF for Polyamide 6 fibre recycling by twin-screw melt extrusion of mixed thermoplastic polymers (opens in a new tab)

  10. Microinjection moulding of polymeric composites with functionalized carbon nanotubes

    … was to disperse the CNT in polyamide 6 (PA6) using melt mixing, and to produce PA6/CNT nanocomposites by microinjection molding (plM). Finally, the morphological and physical properties of the mouldings produced were evaluated. The plM process is becoming of greater importance for the …

    minho-thes Repository record for Microinjection moulding of polymeric composites with functionalized carbon nanotubes (opens in a new tab)

  11. Development and Investigation of new hybrid composite materials based on oriented blends of thermoplastic polymers and nanosized ionorganic fillers

    Nano‐compósitos à base de poliamida‐6 (PA6) e nano‐argilas de montmorillonite (MMT), foram produzidos utilizando‐se duas marcas comerciais: (i) masterbatch Nanomer I.24TL com 20% em massa de MMT em PA6 hidrolítica; (ii) Cloisite 15A em pó, organicamente tratada. O masterbatch Nanomer foi diluído …

    minho-thes Repository record for Development and Investigation of new hybrid composite materials based on oriented blends of thermoplastic polymers and nanosized ionorganic fillers (opens in a new tab)

  12. Feasibility study of thermoplastic nanocomposite for ESD applications using additive manufacturing

    … and electrical resistivity test samples for neat PA6, PA6/NGP with 3wt. %, 5wt. % and 7wt. % loadings were produced using fused deposition modeling (FDM) on commercially available open source 3D printer. Electrical resistivity was measured using Keithley Megohmmeter Instrument. Mechanical …

    texas-state Repository record for Feasibility study of thermoplastic nanocomposite for ESD applications using additive manufacturing (opens in a new tab)

  13. Flame retardant polyamide 6 nanocomposites and nanofibers : processing and characterization

    Polyamide 6 (PA6) was melt-blended with an intumescent flame retardant (FR) and nanoparticles (multi-wall carbon nanotubes [MWNTs] and nanoclays) to produce multi-component FR-PA6 nanocomposites. Thermal, flammability properties, char residue morphology, and mechanical properties of FR-PA6 …

    texas Repository record for Flame retardant polyamide 6 nanocomposites and nanofibers : processing and characterization (opens in a new tab)

  14. Polyamide Carbon Fibre Filled Composite Ageing Characterization in Conventional Automotive Fluids

    … this characterization study include polyamide-6 (PA6) and polyamide-6,6 (PA6/6). The carbon fibre-reinforced composite specimens are subject to long term immersion in commercial automotive fluids at room and elevated temperatures. Results show that the mechanical properties of both polyamide …

    mcmaster Repository record for Polyamide Carbon Fibre Filled Composite Ageing Characterization in Conventional Automotive Fluids (opens in a new tab)

  15. Nucleation and Anti-Nucleation of Polyamides

    … conditions on the properties of polyamide 6 (PA6) was examined. The investigations revealed no significant influence on the polymer properties such as melting and crystallization temperature, degree of crystallinity, glass transition temperature and crystal modification under the applied …

    bayreuth Repository record for Nucleation and Anti-Nucleation of Polyamides (opens in a new tab)

  16. Synthesis and characterisation of polyamide 6 blends made by reactive extrusion

    … monomer content of the reactive polymerised PA6 samples as determined by solution viscometry, gel permeation chromatography and gas chromatography analysis revealed that these properties could be influenced by polymerisation conditions in the extruder, yielding values of Mw up to 100 kg.mol-1 …

    brunel Repository record for Synthesis and characterisation of polyamide 6 blends made by reactive extrusion (opens in a new tab)

  17. Functional nanocomposite fibers through electrospinning : flame retardant and superhydrophobic

    … incorporated nylon-6 nanocomposite (FR-NC-PA6) fibers with a diameter of about 200 nm were fabricated by electrospinning. Before electrospinning, dispersion and exfoliation of the FR additive and MMT in nylon-6 were achieved by twin-screw extrusion. Tensile, TGA and UL-94 flammability tests …

    texas Repository record for Functional nanocomposite fibers through electrospinning : flame retardant and superhydrophobic (opens in a new tab)

  18. Evaluation of Mechanical Properties of Recycled Polyamide-Cellulose Fiber Composite

    … Thermoplastic composites of polyamide 6 (PA6) and cellulose from wood fiber can improve the modulus of PA6 and reduce the weight of an automotive component when compared to glass fiber. However, there is a challenge associated with the thermal stability of cellulose. Therefore one research …

    waterloo Repository record for Evaluation of Mechanical Properties of Recycled Polyamide-Cellulose Fiber Composite (opens in a new tab)

  19. Conductive Nanocomposites of Polystyrene/Polyamide 6/Carbon Nanotube: The role of Polymer/Filler Interaction on Blend Morphology and Electrical Properties Evolution

    … polymers, i.e. polystyrene (PS) and polyamide 6 (PA6), as matrix were melt blended with different compositions. The generated blends were investigated morphologically via light transmission, scanning electron, and transmission electron microscopy techniques; and electrically including DC …

    calgary Repository record for Conductive Nanocomposites of Polystyrene/Polyamide 6/Carbon Nanotube: The role of Polymer/Filler Interaction on Blend Morphology and Electrical Properties Evolution (opens in a new tab)

Page 1 of 5