Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"PC/ABS"”.

  1. Pokročilé směsi na bázi PC/ABS

    Tato diplomová práce studuje směsi polykarbonátu a akrylo-nitryl-butadien-styrenu. Zabývá se optimalizací jejich výroby v laboratorním měřítku a charakterizací jejich vlastností. Porovnává výsledky se vzorkem, který byl připraven v běžné výrobě komerčním partnerem. Pokouší se zlepšit vlastnosti …

    brno-tech Repository record for Pokročilé směsi na bázi PC/ABS (opens in a new tab)

  2. Oro, argono ir azoto dujų įtaka PC/ABS paviršiui jį modifikuojant pikosekundžių ir femtosekundžių šviesos impulsais selektyviam vario nusodinimui besroviu būdu /

    … Air and Nitrogen Gas Agitation to the Surface of PC/ABS during Laser Modification by Picosecond Laser Pulses for Selective Electroless Deposition of Copper This research investigates the effects of air (2 atm), nitrogen (1 atm, 1.5 atm) and argon (1 atm) gas agitation to the surface of PC/ABS …

    vilnius Repository record for Oro, argono ir azoto dujų įtaka PC/ABS paviršiui jį modifikuojant pikosekundžių ir femtosekundžių šviesos impulsais selektyviam vario nusodinimui besroviu būdu / (opens in a new tab)

  3. Comparing Material Impact Strength of Three High Impact Plastic Resins Used In Automotive Grille Using Nonlinear Finite Element Analysis Tools

    … resins being compared are a proprietary grade PC+ABS, an alternate commercial grade PC +ABS and a commercial grade ABS. The results from this study will be used to evaluate the feasibility of replacing PC+ABS with ABS as the grille material to achieve cost savings. To achieve these objective …

    gvsu Repository record for Comparing Material Impact Strength of Three High Impact Plastic Resins Used In Automotive Grille Using Nonlinear Finite Element Analysis Tools (opens in a new tab)

  4. Influence of flame retardant structures and combinations on the fire properties of bisphenol A polycarbonate /acrylonitrile-butadiene-styrene

    The use of PC/ABS polymer for electrics and electronics applications such as thin wall housings requires the addition of bromine- and chlorine- free flame retardant additives. Phosphorus-containing systems are an adequate alternative. Understand their mode of action in the polymer matrix is a key …

    fu-berlin Repository record for Influence of flame retardant structures and combinations on the fire properties of bisphenol A polycarbonate /acrylonitrile-butadiene-styrene (opens in a new tab)

  5. Recycling of plastics derived from end-of-life (EOL) electronic equipment

    … most prominent components of waste plastics, PC (Polycarbonate), PS (Polystyrene) and ABS (Acylonitrile Butadiene Styrene) from obsolete computers are taken to be samples in this work. Qualitative analysis was carried out to identify these samples using FT-IR (Fourier Transform Infrared …

    wvu Repository record for Recycling of plastics derived from end-of-life (EOL) electronic equipment (opens in a new tab)

  6. In-line monitoring of partially miscible molten polymer blends

    … (SAN)/acrylonitrile-butadiene- styrene (ABS), SAN/polycarbonate (PC), and PC/ABS were performed. Absorbance data for the molten blends was recorded in the NIR region from 1200 nm to 2400 nm. Multivariate analysis by partial least squares (PLS) and principal component regression (PGR) of …

    ut-knoxville Repository record for In-line monitoring of partially miscible molten polymer blends (opens in a new tab)

  7. Nanocomposite auf Basis elektrisch leitfähiger und nicht leitfähiger Füllstoffe und deren Verwendung in zähmodifizierten Polymerblends

    … Polyamid-6 (PA-6) / Acrylnitril-Butadien-Styrol (ABS) - Blends, bzw. Polycarbonat (PC) / ABS - Blends durch selektive Modifikation einer Blendphase mit einem Nanofüllstoff und die Herleitung von Struktur-Eigenschaftsbeziehungen für diese Blendtypen. Im Vordergrund des Interesses standen dabei die …

    freiburg-diss Repository record for Nanocomposite auf Basis elektrisch leitfähiger und nicht leitfähiger Füllstoffe und deren Verwendung in zähmodifizierten Polymerblends (opens in a new tab)

  8. Nanocomposites of Multiphase Polymer Blend Reinforced with Carbon Nanotubes: Processing and Characterization

    … and acrylonitrile-butadiene-styrene (PC/ABS) filled with multi-walled carbon nanotubes (MWCNT). The aim is to achieve an improvement of mechanical properties and electrical conductivity of the nanocomposites. In an initial stage, a twin-screw extruder was used to obtain nanocomposites …

    upv Repository record for Nanocomposites of Multiphase Polymer Blend Reinforced with Carbon Nanotubes: Processing and Characterization (opens in a new tab)

  9. Analýza rozměrové přesnosti a mechanických vlastností plastových komponentů zhotovených 3D tiskem

    … ALPS ELECTRIC CZECH, s.r.o. (PETG, PLA, ABS, PLA ESD), doplněné o nové materiály (ASA, PC/ABS). Zhotovené zkušební vzorky, vyrobené pomocí 3D tiskové technologie Fused Deposition Modeling byly analyzovány pomocí mechanických zkoušek (zkouška tahem a dvou zkoušek tvrdosti), drsnosti …

    brno-tech Repository record for Analýza rozměrové přesnosti a mechanických vlastností plastových komponentů zhotovených 3D tiskem (opens in a new tab)

  10. Mineral-filled polypropylene: Improvement of scratch resistance

    … alternative to acrylonitrile-butadiene-styrene (ABS) and polycarbonate+ABS (PC+ABS), pigmented mineral-filled polypropylene (PP) finds an opening in automotive interior components such as instrument panels, knee bolsters, consoles, etc. Because of the lack of surface aesthetics, pigmented …

    unt Repository record for Mineral-filled polypropylene: Improvement of scratch resistance (opens in a new tab)

  11. A Four Physics Approach to Modeling Moisture Diffusion, Structural Mechanics, and Heat Conduction Coupled with Physical Aging for a Glassy Thermoplastic

    … polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS), which is a glassy polymer blend that has very similar behaviour to polycarbonate. In this study, a comprehensive approach which considers four physical mechanisms – structural mechanics, moisture diffusion, heat conduction, and physical …

    waterloo Repository record for A Four Physics Approach to Modeling Moisture Diffusion, Structural Mechanics, and Heat Conduction Coupled with Physical Aging for a Glassy Thermoplastic (opens in a new tab)

  12. Physical Aging and Hygrothermal Response of Polycarbonate/Acrylonitrile-Butadiene-Styrene Polymer Blend

    Polycarbonate (PC) is a glassy engineering thermoplastic that has been used for decades because of its superior mechanical properties such as high toughness and stiffness, and for its general thermal stability. However, the industrial demand for higher performance polymers with faster processing …

    waterloo Repository record for Physical Aging and Hygrothermal Response of Polycarbonate/Acrylonitrile-Butadiene-Styrene Polymer Blend (opens in a new tab)

  13. Funktionalisierte Graphene aus Graphitoxid für Katalyse, Beschichtungen und thermoplastische Nanocomposits

    … TrGO-Graphene in die thermoplastischen Polymere PC, SAN, PA-6, iPP, unterschiedliche SBS-Polymere sowie PC/ABS-Blends eincompoundiert. Neben Graphen kamen in manchen der Polymere auch Graphit-Nanoplättchen, Graphit, exp. Blähgraphit, Leitgraphit, verschiedene MWCNT sowie Leitruß (CB) zum Einsatz. …

    freiburg-diss Repository record for Funktionalisierte Graphene aus Graphitoxid für Katalyse, Beschichtungen und thermoplastische Nanocomposits (opens in a new tab)

  14. Development of a Wind Turbine Test Rig and Rotor for Trailing Edge Flap Investigation

    … aerodynamic parts were 3D printed using plastic PC-ABS material. The total loading on the blade showed higher reduction when the flap was placed further away from the hub and when the flap angle (pitching towards suction side) was higher. The relationship between the load reduction and deflection …

    waterloo Repository record for Development of a Wind Turbine Test Rig and Rotor for Trailing Edge Flap Investigation (opens in a new tab)

  15. Festkörper-NMR-Untersuchungen an thermischen Abbauprodukten von flammgeschützten Polymeren

    … ihren Einfluss auf den thermischen Abbau eines PC/ABS-Blends untersucht. Der thermisch belastete Rückstand wird unabhängig von der Atmosphäre von amorphen Phosphatgruppen dominiert. Dabei konnten die während der Temperprozesse gebildeten Verbindungen α Zn3(PO4)2 und BPO4 als Folge einer …

    wurz-thes Repository record for Festkörper-NMR-Untersuchungen an thermischen Abbauprodukten von flammgeschützten Polymeren (opens in a new tab)

  16. Mechanical and antimicrobial performance analysis of a shark skin bio-mimicked fabric swatch via 3D printing

    … polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polyurethane (PU) material. PU allowed creation of rigid tough denticles embedded in flexible and soft base, indicating as a better raw material to 3D print bio-mimicked swatches for functional clothing. The PU swatches were studied …

    colostate Repository record for Mechanical and antimicrobial performance analysis of a shark skin bio-mimicked fabric swatch via 3D printing (opens in a new tab)

  17. Caracterização e reciclagem de materiais presentes em sucatas de telefones celulares

    … a sua carcaça constituída por uma mistura de PC/ABS (policarbonato/acrilonitrila-butadieno-estireno), material passível de reciclagem mecânica. Já a fração não condutora das placas de circuito impresso (PCI’s) contém as resinas Epóxi e Poliéster, além de inorgânicos (fibra de vidro e …

    brazil-ufrgs Repository record for Caracterização e reciclagem de materiais presentes em sucatas de telefones celulares (opens in a new tab)

  18. Bridging Design and Standardization: Structural Analysis and Optimization of Direct Screw Fastening in Automotive Thermoplastic Panels

    … tested material matrix. Rigid amorphous blends (PC-ABS) demonstrate excellent structural stability at ambient temperatures. They exhibit severe clamp load decay under elevated thermal conditions (60◦C). Glass-fibre reinforced matrices (PP-GF) provide superior long-term preload retention. The …

    chalmers Repository record for Bridging Design and Standardization: Structural Analysis and Optimization of Direct Screw Fastening in Automotive Thermoplastic Panels (opens in a new tab)

  19. Thermal Barrier Coatings and Their Impact On The Mechanical and Thermal Behaviour Of Fused Deposition Modelled Polymers In Harsh Environments

    … to conventional engineering polymers such as PC, ABS and PEEK,and (ii) a biobased, isosorbide-based polycarbonate resin designed to combinekey characteristics of PC and PMMA. Both materials exhibit high stiffness andflexural strength, together with elevated functional heat resistance. GTP has …

    plymouth Repository record for Thermal Barrier Coatings and Their Impact On The Mechanical and Thermal Behaviour Of Fused Deposition Modelled Polymers In Harsh Environments (opens in a new tab)

Page 1 of 2