Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 18 of 18 for “"PC1D"”.
-
Modeling and Simulation of III-Nitride-Based Solar Cells using Nextnano®
… accepted solar cell simulation package, PC1D, was chosen for comparison. To critique the results from both PC1D and Nextnano3, the fundamental drift-diffusion equations were used to calculate the performance of a simple p-n homojunction solar cell device analytically. Silicon was picked …
-
Modifikace struktury křemíkových solárních článků
… teoretických předpokladů je poté v programu PC1D vytvořen jednorozměrný model solárního článku, který je optimalizován pro dosažení maximální konverzní účinnosti. Výsledný model solárního článku je s ohledem na dostupné technologie ve společnosti Solartec s.r.o. realizován a závěrem porovnán …
-
Untersuchung der prozessabhängigen Ladungsträgerrekombination an Versetzungen in Siliziumsolarzellen
… von Donolato und Simulationen mit dem Programm PC1D werden für einzelne Versetzungscluster aus dem gemessenen Zusammenhang zwischen der IQE und der Versetzungsdichte die Gamma-Werte bestimmt. Zur Messung der Versetzungsdichte wurden neue Methoden der automatischen Bildanalyse zur Erkennung von …
-
Měření doby života nosičů proudu ve strukturách křemíkových solárních článků
… práci jsou simulace prováděny pomocí programu PC1D. Pro samotné měření doby života na skutečných vzorcích byly použity dvě metody: QSSPC (měření za kvazi-ustáleného stavu) a MW-PCD (transientní měření s detekcí mikrovlnami). Ve čtvrté kapitole je uveden detailní popis těchto metod, přístrojů a …
-
Growth, Characterization and Simulation of Tungsten Selenide Thin Films for Photovoltaic Applications
… WSe2 solar cell devices are carried out by using PC1D software. Both WSe2 homo-junction devices and hetero-junction devices with an AZO window layer present high efficiency values, over 20%, at several tens of ns carrier lifetime of the absorber layer. This is in large part due to the very high …
-
Investigating Effects of P-N Junction Geometry in Silicon Solar Cells
… With the assistance of simulation tools such as PC1D and Quokka, relationships between Jo, Voc, efficiency and emitter parameters including its area, spacing and perimeter are established. Reduced Jo can be achieved and hence lead to an enhanced Voc provided all recombination sources are …
-
Flash lamp annealing and photoluminescence imaging of thin film silicon solar cells on glass
… and through modelling of cell parameters in PC1D, we can use this wavelength dependence to infer a minority carrier lifetime on low quality Si material.
-
Scanning probe microscopy study of thin film solar cells
… the three solar cells were simulated using the PC1D software. The simulation results were compared with the experimental results to analyze the properties of the junction. The comparison results provided the possible ranges of the thickness and carrier concentration of n-CIGS/n-CZTSe layer.
-
Understanding of defect passivation and its effect on multicrystalline silicon solar cell performance
… Si cells in the presence of defects. Finally, PC1D simulations reveal that the successful implementation of the surface texturing can raise the cell efficiency to 18%.
-
Development of wide-band gap InGaN solar cells for high-efficiency photovoltaics
… suitable modeling program for InGaN solar cells, PC1D is modified up to a source-code level to incorporate spontaneous and piezoelectric polarization in order to accurately model III-nitride solar cells. On the technological front, InGaN with indium compositions up to 30% (2.5 eV band gap) are …
-
Development of a high performance ultra-thin silicon solar cell on steel substrate
… design includes high Voc, high Jsc and high FF. PC1D modelling predicts a maximum efficiency of 25.4% with a Voc of 767 mV. First principle calculation gives a Voc of 757 mV, a Jsc of 39.5 mA/cm2 and a FF of 80.95% for this 20 um solar cell with a textured surface. Test structures made from …
-
Weiterentwicklung einer Durchlauf-Epitaxieanlage und Implementierung einer turbulenten Gasführung
… Arbeit gesteigert werden. Berechnungen mit PC1D ergaben, dass die Schichtqualität ausreichend war um bei einer optimalen Dotierung 16,5% zu erzielen.
-
High Efficiency Industrial p-type PERC and PERT Crystalline Silicon Solar Cells: Boron Junction Doping and Surface Passivation
… based on key characterizations combined with PC1D/PC2D simulations, and effective solutions are put forward to decrease these losses and thus to increase cell efficiency. The second part of the thesis presents a study on boron implanted junction, junction passivation and metal/p+-Si ohmic …
-
Evaporated solid-phase crystallised poly-silicon thin film solar cells on glass
… m-Voc and Jsc-Suns curves, is employed. PC1D modelling is used to extract relevant device parameters. In this work it was found that the diffusion length in the best EVA cells is longer than the absorber layer and that insufficient light trapping is currently the major hurdle to higher …
-
Study of limited junction area approach on silicon solar cells
… will be the key for improving the voltage. A PC1D simulation study is then introduced to resolve the recombination along the depth of the solar cell. Based on that, the major recombination location can be identified and the optimization plan of the layer limiting the voltage can be proposed. …
-
Development of commercial high-efficiency solar cells incorporating selective emitters and passivated rear contacts
… work involving Photoluminescence imaging and PC1D modeling is detailed to further understand the cause of the “apparent” shunting and its impact on the cell performance. Through this investigation, solutions are devised and successfully implemented to overcome the “apparent shunting”. Further …
-
Chemická pasivace povrchu křemíkových desek pro solární články
Táto diplomová práca sa zaoberá skúmaním rôznych druhov roztokov pre chemickú pasiváciu kremíkového povrchu na testovacie účely kremíkových rezov s ich následným porovnaním. Hlavnou úlohou práce je nájsť optimálny roztok, ktorý vyhovuje požiadavkám časovej stability a rýchlosti nábehu pasivačných …
-
The efficiency of photovoltaic systems
At this work the principle aim is to create new low cost hardware test circuitry that can emulate the behavior of solar cells under different insolation and temperature conditions. Another goal is to propose a new MPPT algorithm that could accurate and reliable estimate the maximum power operating …