Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"PDMS microchannels"”.

  1. Electroosmotic Flow Characterization and Enhancement in PDMS Microchannels

    … of the electrostatic forces to create flow in microchannels under an electrical body force. However, the electrostatic properties of the solution/wall material pairings are unique and must be experimentally measured. As a consequence, accurate knowledge about the electrostatic properties of the …

    waterloo Repository record for Electroosmotic Flow Characterization and Enhancement in PDMS Microchannels (opens in a new tab)

  2. Single and Two-Phase Convection in Flexible PDMS Microchannels with Micropillar Arrays

    … transfer performance of Polydimethylsiloxane (PDMS) microchannels with three different micropillar array assemblies ranging from a porosity of 0.8 to 0.91 are investigated and compared under single-phase and two-phase conditions. Dielectric coolant FC-3283 is employed and permeability …

    gatech Repository record for Single and Two-Phase Convection in Flexible PDMS Microchannels with Micropillar Arrays (opens in a new tab)

  3. Pressure Losses Experienced By Liquid Flow Through Pdms Microchannels With Abrupt Area Changes

    … Re = 130) through both rectangular straight duct microchannels (of widths ranging from 50 to 130 micrometers), and microchannels with sudden expansions and contractions (with area ratios ranging from 0.4 to 1.0) all with a constant depth of 104 micrometers. The simplified Bernoulli equations for …

    ucf Repository record for Pressure Losses Experienced By Liquid Flow Through Pdms Microchannels With Abrupt Area Changes (opens in a new tab)

  4. Hydrodynamic and Mass Transport Properties of Microfluidic Geometries

    … and the adjacent microchannel walls. For glass microchannels, the drag force coefficient values demonstrate no-slip. However, PDMS microchannels have significantly lower coefficient values corresponding to hydrodynamic slip lengths of 1-2 μm. These large slip lengths demonstrate that …

    cuny-grad Repository record for Hydrodynamic and Mass Transport Properties of Microfluidic Geometries (opens in a new tab)

  5. Photothermal Lateral Flow Assay with Inertial Microfluidic Enrichment for Early Detection of E. coli in Urinary Tract Infections

    … oxide (PEO) solutions through custom-fabricated PDMS microchannels with straight, symmetric zigzag, and asymmetric zigzag geometries. Optimal enrichment was obtained in a straight 25 µm × 25 µm channel operated at 2 µL/min with 1000 ppm PEO, resulting in approximately an order-of-magnitude …

    york Repository record for Photothermal Lateral Flow Assay with Inertial Microfluidic Enrichment for Early Detection of E. coli in Urinary Tract Infections (opens in a new tab)

  6. Rapid and Highly Controlled Generation of Multiple Emulsions via a Hybrid Microfluidic Device

    … cell culture. Furthermore, polydimethylsiloxane (PDMS) microchannels are fabricated using conventional soft lithography techniques and coated with Tetraethyl Orthosilicate (TEOS) and Ethylamine (EA) to form a nanometer silicon oxide layer inside the microchannels. TEOS coated PDMS chips provide …

    calgary Repository record for Rapid and Highly Controlled Generation of Multiple Emulsions via a Hybrid Microfluidic Device (opens in a new tab)

  7. Collective Cell Migration across Confinements

    … cell migration and why we chose polysiloxane (PDMS) microchannels as the in vitro platform for study collective cell migration across confinement. In chapter 2, we found that the migrating collectives built up cell density differentials upon encountering microchannels. Such accumulation of cell …

    wustl Repository record for Collective Cell Migration across Confinements (opens in a new tab)

  8. A microfluidic model of the human corneal epithelium for estimating drug permeation

    … given. The chip utilizes polydimethylsiloxane (PDMS) microchannels bonded to a polycarbonate (PC) membrane to form the support structure of the organ chip device. The membrane was treated with fibronectin and seeded with 1,3, or 5 layers of immortalized human corneal epithelial cells to …

    ttu Repository record for A microfluidic model of the human corneal epithelium for estimating drug permeation (opens in a new tab)

  9. Sensitive Detection of Foodborne E. coli O157:H7 by Dendrimer-aptamer Modified Microchannels - with RCA Signal Intensifications

    … onto inner surfaces of polydimethyl siloxane (PDMS) microchannels to avoid non-specific binding and to provide more binding sites to subsequently conjugate capturing aptamers as recognition elements. Surface modifications by the PAMAM dendrimers and the aptamers are characterized. To further …

    ottawa-retro Repository record for Sensitive Detection of Foodborne E. coli O157:H7 by Dendrimer-aptamer Modified Microchannels - with RCA Signal Intensifications (opens in a new tab)

  10. Promoting Endothelial Cell Growth within Microchannels - Modification of Polydimethylsiloxane and Microfabrication of Circular Microchannels

    Polydimethylsiloxane (PDMS) microfluidic channels, fabricated using low cost and simple soft lithography methods, conventionally have rectangular cross-sections. Despite being often used for organs-on-a-chip and cardiovascular research, these devices do not mimic the circular cross-sections of …

    ottawa-retro Repository record for Promoting Endothelial Cell Growth within Microchannels - Modification of Polydimethylsiloxane and Microfabrication of Circular Microchannels (opens in a new tab)

  11. Applications of electrochemiluminescence detection on microfabricated devices

    … system was fabricated in poly(dimethylsiloxane) (PDMS) and glass with integrated carbon fiber and platinum electrodes, and tested for direct ECL detection of guanosine. The magnitude of electroosmotic flow (EOF) in PDMS microchannels was determined using the current monitoring method. Results …

    aalto Repository record for Applications of electrochemiluminescence detection on microfabricated devices (opens in a new tab)

  12. A Study of the Flow of Microgels in Patterned Microchannels

    … of the flow of soft objects (microgels) through microchannels. This work was carried with the intention of building a fundamental biophysical model for the flow of neutrophil cells in microcirculatory system. In Chapter 1 we give a summary of the literature describing the flow of cells and “model …

    toronto-retro Repository record for A Study of the Flow of Microgels in Patterned Microchannels (opens in a new tab)

  13. Additive Manufacturing of Microfluidic Technologies via In Situ Direct Laser Writing

    … Initially, we use poly(dimethylsiloxane) (PDMS)-based isDLW to fabricate microfluidic diodes that enable unidirectional rectification of fluid flow. We introduce a novel cyclic olefin polymer (COP)-based isDLW strategy to address several limitations related to structural adhesion and …

    maryland Repository record for Additive Manufacturing of Microfluidic Technologies via In Situ Direct Laser Writing (opens in a new tab)

  14. In Vitro Investigation of Cell-Free Layer Formation in Microchannels: Dependency on the Red Blood Cell Aggregation and Field of Shear

    … and the microchannel geometry on blood flow in microchannels. In this work, 10% hematocrit human blood suspensions were prepared in native plasma and flowed through poly-dimethylsiloxane (PDMS) microchannels of 100 μm x 34 μm cross-section. Investigation of the flowing cells was performed by …

    ottawa-retro Repository record for In Vitro Investigation of Cell-Free Layer Formation in Microchannels: Dependency on the Red Blood Cell Aggregation and Field of Shear (opens in a new tab)

  15. MicroPIV measurement of turbulent and transitional flow characteristics in microchannels

    … were performed on smooth and roughened microchannels. These measurements represent the first instantaneous velocity field measurements in a turbulent microscale flow;The effect of hydraulic diameter on flow through smooth square polydimethylsiloxane (PDMS) microchannels was investigated …

    iastate Repository record for MicroPIV measurement of turbulent and transitional flow characteristics in microchannels (opens in a new tab)

  16. Bubble Free Electrodes for Electroosmotic Pumping

    … electrodes embedded in poly di-methylsiloxane (PDMS) micro channels. However, embedding thick electrodes inside PDMS channels using traditional micro fabrication will lead to a gap near the electrodes which can result in leakage of the working fluid. A new surface micromachining technique in …

    mcmaster Repository record for Bubble Free Electrodes for Electroosmotic Pumping (opens in a new tab)

  17. A Low Power Electrical Method for Cell Accumulation and Lysis Using Microfluidics

    … (PCTE) membrane sandwiched between two PDMS microchannels with electrodes embedded at the reservoirs of the microchannels. Microcontact printing is used to attach this PCTE membrane with PDMS.</p> <p>By using this PCTE membrane, it was possible to intensify the electric field at the …

    mcmaster Repository record for A Low Power Electrical Method for Cell Accumulation and Lysis Using Microfluidics (opens in a new tab)

  18. Nano-orifice based Dielectrophoretic Manipulation and Characterization of Nanoparticles and Biological Cells

    … flow in the polydimethylsiloxane (PDMS) microchannels. At the beginning of this thesis, a nano-orifice based dielectrophoretic microfluidic chip is developed. In such a chip, the non-uniform electric field is generated by applying the electric field via a pair of asymmetric …

    waterloo Repository record for Nano-orifice based Dielectrophoretic Manipulation and Characterization of Nanoparticles and Biological Cells (opens in a new tab)