Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 245 for “"PEM Fuel Cells"”.
-
Cathode durability in PEM fuel cells
Proton exchange membrane (PEM) fuel cells are competitive with other emerging technologies that are being considered for automotive transportation. Commercialization of PEM fuel cells would decrease emissions of criteria pollutants and greenhouse gases and reduce US dependence on foreign oil. …
-
Fibre optic sensors for PEM fuel cells
… for application in polymer electrolyte fuel cells (PEMFC) are presented in this thesis. Temperature, relative humidity (RH) and air-water two-phase flow sensors are developed and demonstrated based on optical fibre Bragg gratings (FBG). Bragg gratings offer the following characteristics …
-
Efficient PEM fuel cells for portable applications
Fuel cells (FCs) have attracted considerable attention for replacing batteries in many electronic devices. Among different types of fuel cells, the proton exchange membrane fuel cell (PEMFC) is most widely investigated. Air-breathing proton exchange membrane fuel cells (AB-PEMFCs) have received …
-
Alternative cathode catalysts for PEM fuel cells
Proton exchange membrane fuel cells, PEMFC’s, offer a clean, flexible mode of energy generation, though efficiency improvements are required before they can become commercially viable. While platinum is currently the most commonly used cathode catalyst, a large overpotential exists for the oxygen …
-
Design considerations for testing freeform PEM fuel cells
A proton exchange membrane (PEM) fuel cell test platform was functionally evaluated and redesigned in terms of its "test system" and "stack fixture" constituents so as to accommodate novel fuel cell stacks manufactured with selective laser sintering (SLS) technology. Structured engineering …
-
Corrosion of bipolar plates in PEM fuel cells
… which were used in proton exchange membrane fuel cell (PEM FC) stacks. The laboratory XRF results were consistent with the synchrotron XRF results. Higher levels of contaminants observed for the areas near to the coolant outlet than the areas near to the coolant inlet. The cathode side of …
-
Understanding of Ammonia Transport In Pem Fuel Cells
This dissertation investigated ammonia (NH3) as a fuel contaminant to the anode in Proton Exchange Membrane Fuel Cells (PEMFCs). Since NH3 is fed to the anode in a gas phase and transferred to the cathode, the effect of a contaminant is distributed through MEA and quite complicated. This study is …
-
Water and Thermal Management of PEM Fuel Cells
Proton Exchange Membrane (PEM) fuel cells have a great potential to replace conventional fossil fuel dependent power conversion technologies in a wide range of portable, automotive and stationary applications and this is due to their high efficiency, quick start-up and sizing flexibility. However, …
-
Electrocatalytic investigation of high temperature PEM fuel cells
… more light on the electrochemical interface of HTPEM fuel cell. More specifically, to understand and improve the electrochemical interface of both the anodic and cathodic electrode in HTPEM fuel cells, as well as optimize the catalyst layer structure for operation under various challenging …
-
Transients in Polymer Electrolyte Membrane (PEM) Fuel Cells
… has presented proton exchange membrane (PEM) fuel cells as a potential energy source. The use of PEM fuel cells for automotive and other transient applications, where there are rapid changes in load, presents a need for better understanding of transient behavior. In particular at low …
-
Exploring factors for electrode prototyping for PEM fuel cells
… critical. Some emerging technology is hydrogen fuel cells and amongst them are proton exchange membrane fuel cells. With all new technologies there are several factors that need development, and this work takes a closer look at the catalyst layer of the cathode. Setting out to increase the …
-
Transport design through carbon material engineering in PEM fuel cells
With the advancements in fuel cell technology, PEM fuel cells have seen tremendous improvements in terms of durability, enhanced catalytic performance and reliability. The introduction of the microporous layer (MPL) has been proven to be highly beneficial in for water management especially at high …
-
Mathematical Modeling of Transient Transport Phenomena in PEM Fuel Cells
… performance of polymer electrolyte membrane fuel cells (PEMFCs) is of great interest for mobile applications such as in automobiles. However, the length scale of a PEM fuel cell's main components are ranging from the micro over the meso to the macro level, and the time scales of various …
-
Pore-Scale Modeling of Platinum Degradation in PEM Fuel Cells
… load requirements. Polymer electrolyte membrane (PEM) fuel cells can offer a promising solution due to their long range, low weight, and fast refueling times. However, their application for heavy-duty vehicles is limited by durability issues which limit the fuel cell lifetime. In particular, …
-
Fatigue and Mechanical Damage Propagation in Automotive PEM Fuel Cells
Polymer electrolyte membrane (PEM) fuel cells are generally exposed to high magnitude road-induced vibrations and impact loads, frequent humidity-temperature loading cycles, and freeze/thaw stresses when employed in automotive applications. The resultant mechanical stresses can play a significant …
-
Transport Phenomena in Cathode Catalyst Layer of PEM Fuel Cells
Polymer electrolyte membrane (PEM) fuel cells have increasingly become promising green energy sources for automobile and stationary cogeneration applications but its success in commercialization depends on performance optimization and manufacturing cost. The activation losses, expensive platinum …
-
Novel microporous layers with improved interfacial characteristics for PEM fuel cells
… gas emissions promote proton exchange membrane fuel cells (PEMFCs) as a promising energy conversion technology. However, its widespread commercial application is hampered by certain cost, performance and durability limitations. The interface between the MPL (microporous layer) and the cathode CL …
-
Transport Properties of the Gas Diffusion Layer of PEM Fuel Cells
… layer (GDL) of polymer electrolyte membrane (PEM) fuel cells. This material is both chemically and mechanically stable and provides a free path for diffusion of reactants and removal of products and is electrically conductive for transport of electrons. The transport of species in the GDL has …
-
Two-Phase Flow in Microchannels with Application to PEM Fuel Cells
The performance of PEM fuel cells (PEMFC) relies on the proper control and management of the liquid water that forms as a result of the electrochemical process, especially at high current densities. The liquid water transport and removal process in the gas flow channel is highly dynamic and many of …
Page 1 of 13