Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 100 for “"PETG"”.

  1. Shaping Light: Light Modulation Using 3D-Printed PETG

    … 3D-printed Polyethylene Terephthalate Glycol (PETG) surfaces can be used to modulate light in controlled ways. The research examines how material translucency and surface geometry influence lighting effects such as subsurface and layered scattering, directional reflection, and perceptual …

    waterloo Repository record for Shaping Light: Light Modulation Using 3D-Printed PETG (opens in a new tab)

  2. Mechanical Properties Evaluation of 3D Printed PETG and PCTG Polymers

    … Acid (PLA), Polyethylene terephthalate glycol (PETG) and many more are available for 3D printing. Due to the wide range of applications in PLA, it is necessary to improve its toughness to make it more suitable by adding Poly Cyclohexylenedimethylene Terephthalate glycol (PCTG) elastomer in PLA …

    sdstate Repository record for Mechanical Properties Evaluation of 3D Printed PETG and PCTG Polymers (opens in a new tab)

  3. Effect of 3D Printing Parameters on Mechanical Properties of PETG

    … Four different experiments were conducted on PETG to evaluate how individual printing parameters affect the tensile behavior. These printing parameters included size of specimens, infill angle, rate of cooling, and nozzle temperature. Experimental data for size effects shows that width has a …

    gatech Repository record for Effect of 3D Printing Parameters on Mechanical Properties of PETG (opens in a new tab)

  4. Esterification of cellulose nanocrystals for reinforcing recycled polyethylene terephthalate glycol (R-PETG) biocomposites

    … recycled polyethylene terephthalate glycol (R-PETG) and addresses the incompatibility between the hydrophobic matrix and hydrophilic cellulose nanocrystals (CNCs). CNCs were esterified with dodecenylsuccinic anhydride (DDSA) to introduce aliphatic succinyl chains at controllable grafting …

    ubc Repository record for Esterification of cellulose nanocrystals for reinforcing recycled polyethylene terephthalate glycol (R-PETG) biocomposites (opens in a new tab) Download PDF for Esterification of cellulose nanocrystals for reinforcing recycled polyethylene terephthalate glycol (R-PETG) biocomposites (opens in a new tab)

  5. Výpočtové modelování procesu 3D tisku součástí z PET-G materiálu

    … 3D tisku prováděného metodou FDM z materiálu PETG pomocí metody konečných prvků. V její rešeršní části je obsažen stručný popis možností modelování procesu 3D tisku metodou konečných prvků a jsou shrnuty základní mechanické vlastnosti termoplastů. V praktické části jsou vyhodnoceny tahové …

    brno-tech Repository record for Výpočtové modelování procesu 3D tisku součástí z PET-G materiálu (opens in a new tab)

  6. Experimental and Modeling Study of Gas Adsorption in Metal-Organic Framework Coated on 3D Printed Plastics

    … of MIL-101 (Cr) MOF coated on 3D printed PETG, a glycol modified version of polyethylene terephthalate, through a combined experimental and modeling study. The specific goals are: (1) synthesis of MIL-101 (Cr) MOFs; (2) nitrogen gas adsorption measurements and microstructure and phase …

    iupui Repository record for Experimental and Modeling Study of Gas Adsorption in Metal-Organic Framework Coated on 3D Printed Plastics (opens in a new tab)

  7. Investigative Study of 3D Printed Connectors in Volvo Trucks production - A Comparison of Methods and Materials

    … polymer materials: Sustarine, PLA, PLA-CF, PETG, PETG-CF, TPU, and PATH-CF. In addition to tensile testing, the 3D printed test samples were also observed for surface quality and dimensional accuracy. From the material study, it was found that the PLA, PLA-CF, PETG and PETG-CF materials were …

    chalmers Repository record for Investigative Study of 3D Printed Connectors in Volvo Trucks production - A Comparison of Methods and Materials (opens in a new tab)

  8. 3D Printed Multicomponent Polymer Based Materials Via Hybrid Filaments: Fabrication And Characterization

    … (PP) and polyethylene terephthalate glycol (PETG) immiscible polymer system as well as the development of three viable methods through which the issues pertaining to multicomponent systems can be resolved. Namely, we report here on the morphology and structure behind a PPwPETG hybrid filament …

    clemson Repository record for 3D Printed Multicomponent Polymer Based Materials Via Hybrid Filaments: Fabrication And Characterization (opens in a new tab)

  9. Identifikace složení etiket lahví PET určených k recyklaci

    … recyklace PET jsou nejvíce problematické PVC a PETG. Tyto dva plasty nelze od PET jednoduše separovat, a i malý obsah může znehodnotit výsledný produkt recyklace. Tato práce se tedy zabývá identifikací složení etiket PET lahví určených k recyklaci. K analýze vzorků etiket byl využit FTIR-ATR …

    brno-tech Repository record for Identifikace složení etiket lahví PET určených k recyklaci (opens in a new tab)

  10. Polymer Materials Via Melt Based 3D Printing: Fabrication and Characterization

    … and polyethylene terephthalate glycol modified (PETG) filaments. Then, PLA/PETG bi-component hybrid structures were fabricated and heat treated to improve their mechanical characteristics. Further improvement of the mechanical properties for the printed bi-component structures was achieved by …

    clemson Repository record for Polymer Materials Via Melt Based 3D Printing: Fabrication and Characterization (opens in a new tab)

  11. A thermoplastic matrix continuous fiber reinforced composite impregnation method by direct polymer extrusion

    … of E-glass continuous fiber reinforcement with a PETG matrix. It was found that both manufacturing processes are capable of producing samples with an SBS strength of approximately 53 MPa, and it was concluded that the proposed process has the capability to deposit material of comparable quality to …

    colostate Repository record for A thermoplastic matrix continuous fiber reinforced composite impregnation method by direct polymer extrusion (opens in a new tab)

  12. 3D tisk kompozitních materiálů

    … Mark Two. Další skupina vzorků materiálu PETG PM a PETG CFjet carbon s obsahem uhlíkových mikrovláken byla vyrobena na tiskárně Original Prusa i3 MK2S. Z hlediska technického hodnocení je provedena tahová zkouška, která je v souladu s normou EN ISO 527-2:2012. Na základě získaných výsledků …

    brno-tech Repository record for 3D tisk kompozitních materiálů (opens in a new tab)

  13. Účinek vibračního a rotačního omílání na plastové díly zhotovené metodou FDM

    … omílání na texturu povrchu u materiálů ABS, PETG a PLA, výhradně plošnou aritmetickou drsnost $S_a$. Pro vlastní omílání bylo využito čtyř omílacích médií, ty jsou jmenovitě buková štěpka, ořechová skořápka, keramická a plastová tělíska. Experiment byl sestaven jako neopakovaný faktoriální …

    brno-tech Repository record for Účinek vibračního a rotačního omílání na plastové díly zhotovené metodou FDM (opens in a new tab)

  14. Development and Application of Liquid Microjunction Sampling into Inductively Coupled Plasma Mass Spectrometry (LMJ-ICPMS) for the Quasi-Non-Destructive Elemental Characterization of Polymer Materials Associated with 3D-Printed Firearms

    … (PA6-GF), polyethylene terephthalate glycol (PETG), and polylactic acid (PLA). Distinct elemental profiles were obtained for PA6-GF and PETG, with statistically significant differences observed for several elemental markers. Elemental ratio analysis and principal component analysis (PCA) …

    queens Repository record for Development and Application of Liquid Microjunction Sampling into Inductively Coupled Plasma Mass Spectrometry (LMJ-ICPMS) for the Quasi-Non-Destructive Elemental Characterization of Polymer Materials Associated with 3D-Printed Firearms (opens in a new tab)

  15. Kr-F laser surface treatment of poly(methyl methacrylate), glycol-modified poly(ethylene terephthalate), and polytetrafluoroethylene for enhanced adhesion of Escherichia Coli K-12

    … surface damage on both PMMA and PTFE. PETG showed some signs of wavering in the surface and material removal was confirmed through optical microscopy. Due to the extensive damage associated with ablation, a much lower-powered, continuous beam Kr-F laser was used for contact angle …

    vt Repository record for Kr-F laser surface treatment of poly(methyl methacrylate), glycol-modified poly(ethylene terephthalate), and polytetrafluoroethylene for enhanced adhesion of Escherichia Coli K-12 (opens in a new tab)

  16. Tactus

    … je tak totemový pilíř vytištěn z materiálu PETG.

    brno-tech Repository record for Tactus (opens in a new tab)

  17. Design and engineering of starch-based polymer materials as substitutes for persistent non-biodegradable plastics

    … with glycol modified polyethylene terephthalate (PETG) using transesterification chemistry to synthesize MTPS-g-PETG in situ graft copolymer with 33% grafting. Mechanical and thermal properties of the blend were evaluated and compared with neat PETG. The addition of starch into PETG molecular …

    msu Repository record for Design and engineering of starch-based polymer materials as substitutes for persistent non-biodegradable plastics (opens in a new tab)

  18. Characterization of Thermoplastics for Leaf Spring Application

    … leaf spring. Polyethylene Terephthalate Glycol (PETG), Polyamide 66 (PA 66) and Polyphenylene Sulfide (PPS) were the matrices considered for this research work. Mechanical testing (tensile, compressive, shear, flexural and moisture absorption) was performed to these three thermoplastic composites …

    uab Repository record for Characterization of Thermoplastics for Leaf Spring Application (opens in a new tab)

  19. BIOBASED MATERIALS FROM STARCH : TRANS-ESTERIFICATION BLENDS WITH COMMERCIAL POLYMERS

    … extraction) of thermoplastic starch and PBAT or PETG blends was established. These blends were designed to contain 30% starch by weight. The more linear, high amylose content thermoplastic starch (MTPS) produced blends with PETG with acceptable decline in mechanical properties as compared to …

    msu Repository record for BIOBASED MATERIALS FROM STARCH : TRANS-ESTERIFICATION BLENDS WITH COMMERCIAL POLYMERS (opens in a new tab)

  20. Návrh morfujícího flaperonu pro aditivní výrobu technologií FDM

    … využívá RDS (Rotary Drive System) mechanismus a PETG filament.

    brno-tech Repository record for Návrh morfujícího flaperonu pro aditivní výrobu technologií FDM (opens in a new tab)

Page 1 of 5