Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 40 for “"PFC3D"”.
-
Development of a Rock Expert System (RES) for Evaluating Rock Property Values and Utilization of Three Dimensional Particle Flow Code (PFC3D) to Investigate Rock Behavior
… of the three-dimensional Particle Flow Code (PFC3D) to analyze rock behavior. Because of different reasons, it is often difficult to obtain the rock property values directly. As an alternative, typical values and empirical correlations are often used to evaluate the rock property values. …
-
Modeling biofibre (hemp) processing using the discrete element method (DEM)
… code, the Particle Flow Code in Three Dimension (PFC3D). In the models, virtual hemp, hemp fibre and core were defined using clusters of PFC3D basic spherical particles which are connected by the PFC3D parallel bonds. The microproperties (e.g. particle stiffness and friction coefficient, and bond …
-
Particulate mechanics framework for modelling multi-physics processes in fracturing geomaterials
… Particle Flow Code in Three Dimensions (PFC3D), with the intention that they could be combined to represent a geomechanical problem of any configuration. Advantages of utilising PFC3D were firstly, its inbuilt feature allowing inter-particle bonding so that, in the limiting case, solid …
-
Modellierung der Formstoffströme beim Vollformgießen
… wurde mit Hilfe von Distinct Element Methode und PFC3D-Programm eine 3D-Modellierung der Formstoffströme bei der Formherstellung, indem es zur Sandverdichtung unter der Vibrationseinwirkung kommt, für das Vollformgießen durchgeführt. Hierfür wurden die Fließeigenschaften des trockenen binderfreien …
-
Stress-induced permeability evolution in coal: Laboratory testing and numerical simulations
… laboratory tests and a coupled model using PFC3D and FLAC3D to simulate the stress induced permeability evolution in coal samples. Basic mechanical properties are determined via lab testing. The spatial distributions of different components inside the reconstructed samples produce a …
-
Evaluation of excavated surface irregularities and hardness of mechanical excavations and their relationship with excavator performance
… was conducted in Itasca’s Particle Flow Code 3D (PFC3D). It involved model calibration, a study of the effects of the cutting geometry and cutter scale on the cutting forces, validation of the models using the lab cutting data, and a study of the effects of cutter size on the cutting forces. The …
-
Investigation of Geomechanical Behavior of Laminated Rock Mass Through Experimental and Numerical Approach
… based on the finite difference method (FDM) and PFC3D based on the discrete element method (DEM). Next, this research developed the coal mine entry model with the laminated roof in the PFC program using laboratory data and investigated the effect of bedding plane spacing, bedding plane strength, …
-
Simulation von gesteinsmechanischen Bohr- und Schneidprozessen mittels der Diskreten - Elemente - Methode
… Mit der dreidimensionalen Simulationssoftware PFC3D auf Partikelbasis wurden Modelle mit Hilfe von Zug-, Druck-, Scher- und Stanzversuchen kalibriert und anschließend Schneid- und Bohrversuche simuliert. Die Schneidsimulationen erbrachten bezüglich der Kräfte bei verschiedenen Prozessparametern …
-
Modeling pore structures and airflow in grain beds using discrete element method and pore-scale models
… of grain bulks. A commercial software package PFC3D (Particle Flow Code in Three Dimension) was used to develop the DEM model. In the model, soybeans kernels were considered as spherical particles. Based on simulated positions (coordinates) and radii of individual particles, the characteristics …
-
The Simulation and Analysis of Particle Flow Through an Aggregate Stockpile
… separate stockpiles have been created using PFC3d. Mainly, the simulations prove PFC3d is capable of showing how stockpile particles move in three dimensions while monitoring specific particles within the pile. In addition, these models provide simulation results similar to the results …
-
Modelling of soil-tool interactions using the discrete element method (DEM)
… using Particle Flow Code in Three Dimensions (PFC3D), a discrete element modeling software. When comparing the disc model to the experiment results, the relative error was 11% for the average soil throw, 1.9% for the average draft force, and 51% for the average vertical force. Results from the …
-
Uncertainty Quantification of the Homogeneity of Granular Materials through Discrete Element Modeling and X-Ray Computed Tomography
… numerically using the Discrete Element program PFC3D. The resulting microstructure of the numerical sample was compared to the results of the image analysis to determine if the heterogeneity of the sample could be reproduced correctly for use in Discrete Element Modeling.
-
Simulation of High-velocity Penetration for Rigid Projectile into Plain Concrete Target using Discrete Element Method
… concrete model was established by using software PFC3D. The major micro-variables of the simulation program were calibrated according to the required macro-mechanical parameters. Meanwhile, their correlations within the concrete range were studied, with the sensitivity analysis and the …
-
Using LiDAR to measure subsurface movement of slow-moving landslides and study the interaction between the soil and LiDAR scanning targets
… of computer simulation software, FLAC3D® and PFC3D® were used to simulate the landslide process to compare with the LiDAR scanning results.</p><p>The primary contributions from this research are as follows:</p><p>1. Several error tests were done to prove that the three-dimensional LiDAR …
-
Mesoscopic Distinct Element Method for Carbon Nanotubes: From Workstation to Massively Parallel Simulations
… mDEM, previously implemented in the DEM code PFC3D, is cast into an enhanced vector format and scalable parallelized with the message passing interface (MPI) technology, as enabled by waLBerla DEM multiphysics framework. The new capability allows for the modeling of large assemblies of CNTs, …
-
Imaging of Stress in Rock Samples using Numerical Modeling and Laboratory Tomography
… uniaxially loaded. The discrete element code, PFC3D, is used. The laboratory properties of the rock sample need to be converted to the micro-properties of the particles in the model. Currently no theory exists for this conversion. In the current study an equation has been developed for this …
-
Dry Deshaling of Thermal Coals in India
… a discreet elemental model was developed using PFC3D to understand the process of segregation on a dry density based vibratory table. Analysis was done to show the effect of different forces on the process efficiency. Also, operating parameters and particle properties such as frequency of …
-
Effect of Particle Breakage on Ballast Permanent Deformation — A Study Using the Discrete Element Method
… commercially available Discrete Element Package (PFC3D®) was used to simulate the response of the ballast layer under loading. Various factors that affect ballast breakage and eventual permanent deformation accumulation within the ballast layer were studied, and analyzed. First, the ballast …
-
Interaktion Geogitter-Boden
… und Validierung numerischer Modelle in PFC3D, basierend auf den Randbedingungen und Ergebnissen von systematisch durchgeführten Laborversuchen, zur Reproduktion des natürlichen Interaktionsverhaltens innerhalb eines Geogitter-Boden Verbundsystems. Ein spezieller Fokus richtet sich auf …
-
Discrete Element Modeling of Railway Ballast for Studying Railroad Tamping Operation
… a commercially available DEM software called PFC3D (Particle Flow Code 3D). A detailed explanation is provided about how to set up the DEM model of railway ballast considering important parameters like selection and calibration of particle shapes, ballast mechanical properties, contact model, …
Page 1 of 2