Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"PLANE CRACK"”.
-
Fracture analysis of bridges by spline finite strip method
… primary objective of this thesis is to develop crack strip method and verify the convergency of the method, finally to perform fracture analysis of bridge structures using spline finite strip method. In this thesis, combining the shape function of spline finite strip with the eigenfunction …
-
Mathematical modelling of aortic dissection
… model for the dissection is presented. The 2D plane crack problem in linear elastic infinity plane and 2D strip, the axisymmetric crack problem in linear elastic compressible and incompressible tube, the axisymmetric crack problem in an incompressible axisymmetric aorta are applied to obtain …
-
Mixed mode I-II-III fracture criterion and its application to cement mortar
To study crack behaviour of brittle and slightly ductile materials under pure mode III loading, the closure analysis of an infinitesimal crack extension has been carried out, and relationship between the stress intensity factor and energy release rate established. On the basis of the unified model, …
-
The application of finite element analysis to fracture mechanics.
… mechanics, for Mode I,mixed-mode, I and II, plane stress/strain problems, and Mode I axisymmetric bodies under axisymmetric loading. Numerical examples are presented to demonstrate the validity of the fracture program packages, which has been translated from its existing Algcl format to …
-
Mode I Fracture Toughness of Eight-Harness-Satin Carbon Cloth Weaves for Co-cured and Post-bonded Laminates
… investigated through the DCB test (ASTM D5528). Crack propagations along both the fill and weft yarns were considered for both post-bonded (co-bonded) and co-cured laminates. A patent-pending delamination insertion method was compared to the standard Teflon film option to assess its applicability …
-
The transition from subsonic to supersonic cracks
… the full analytical solution for steady-state in-plane crack motion in a brittle triangular lattice. This allows quick numerical evaluation of solutions for very large systems, facilitating comparisons with continuum fracture theory. Cracks that propagate faster than the Rayleigh wave speed have …
-
Discrete Atomic Simulation of Fracture in Iron
… of these two studies to the simulation of (001) plane fracture in α-iron.</p> <p>Tests were performed comparing various solution methods used for atomic level computer modelling. The results are presented and indicate the most efficient method to be chosen for various problems. This may allow a …
-
Notched behaviour of stitched and unstitched RFI CFRP laminates
… effect of through-thickness stitching on the in-plane crack growth of Resin Film Infused (RFI) carbon fibre/epoxy laminates. Through-thickness reinforcement is a relatively recent approach to compensate for poor out-of-plane mechanical properties in laminated materials and also as a new method of …
-
Damage mechanics model for brittle failure of transversely isotropic solids : finite element implementation
A new continuum damage model, the wing crack damage (WCD) model, was developed for the analysis of brittle failure of transversely isotropic solids. Special attention was paid to the analysis of axial splitting under compression and tensile cracking under tension. In addition to the WCD model a …
-
Fracture mechanics of bi-material interface cracks
… that the elastic stress distribution near a crack tip in an isotropic two dimensional deformation field exhibits an inverse square root singularity. The nature of the stress singularity at the tip of a plane crack terminating at an interface of two materials is, however, dependent on both the …
-
Structural health monitoring of offshore wind turbines using iFEM and peridynamics
… given to the creation of the general inverse plane elements and the major inverse plane crack tip (iPCT element. The accuracy of this type of element is tested with various numerical examples by estimating the SIF values. With the help of this iPCT element, the limitation of iFEM when dealing …
-
ΣΥΜΒΟΛΗ ΣΤΗΝ ΕΞΕΤΑΣΗ ΤΗΣ ΔΙΑΔΟΣΗΣ ΤΩΝ ΕΠΙΠΕΔΩΝ ΡΩΓΜΩΝ ΣΤΟΝ ΤΡΙΣΔΙΑΣΤΑΤΟ ΓΡΑΜΜΙΚΑ ΕΛΑΣΤΙΚΟ ΧΩΡΟ. ΟΙ ΦΑΣΕΙΣ ΤΗΣ ΕΝΑΡΞΗΣ ΤΗΣ ΔΙΑΔΟΣΗΣ ΚΑΙ ΤΗ...
IN THIS DISSERTATION THE EXAMINATION OF PLANE CRACKS, IN THE THREE-DIMENSIONAL SPACE, WHICH ARE DEFORMED ACCORDING TO THE OPENING MODE IS PRESENTED. IN THE PROCESS OF CALCULATION THE CRITERION OF THE MINIMUM STRAIN ENERGY DENSITY (MSED) WAS MAINLY USED, WHICH IS INDICATED FOR THE EXAMINATION OF THE …
-
Mechanismy poškození při multiaxiální únavě
Práce se zabývá víceosou únavou austenitické korozivzdorné oceli 316L. Materiál byl zatěžován cyklicky v tahu/tlaku a krutu. Jejich kombinace byla použita pro testování ve dvou víceosých módech: in-phase (ve fázi) a out-of-phase (mimo fázi). Všechny zkoušky byly provedeny v režimu řízení celkové …
-
Φλεξοηλεκτρισμός στην αντι-επίπεδη δυναμική μηχανική των θραύσεων
… the deformation and polarization field in anti-plane problems with strain gradients concentrations. The material is assumed to be flexoelectric linear elastic. The analyses are both numerical and theoretical. Initially the anti-plane problem is cured when a body force is applied. In that aspect …