Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"POLE FIGURES"”.
-
High Energy X-Ray Diffraction Studies Of Heterogeneous Slip In Plastically Deforming Single Crystals
… on multiple slip systems using single crystal pole figures is also developed. The method is applied to the study of single crystal pole figures measured in-situ from a plastically deforming silicon single crystal. Lastly, the results from a new high resolution diffraction technique are …
-
Pulse-Electroplating: Process Parameters and Their Influence on the Formed Microstructure
… the help of EBSD technique, orientation maps, pole figures and inverse pole figures were obtained for all samples. Different microstructures were obtained by changing temperature and current density. As a result, the average grain size of asdeposited Nickel varied from 30 nm to 200 nm, …
-
Effect of twinning on texture evolution of depleted uranium using a viscoplastic self-consistent model
… and the theoretical textures, plotted as pole figures or inverse pole figures, are compared with previous experimental textures found for alpha uranium from previous experimental sources. A specific twin system, the (176)[512] system, is also given special consideration. This twin system …
-
Cyclic Fatigue Behavior of Friction Stir Welded AZ-Series Magnesium Alloys
… as well as a specimen that was undeformed. The pole figures show a strong initial basal texture for the undeformed specimen that becomes rotated off the tensile axis as the specimens are subjected to increasing fatigue damage. The pole figures for the moderate stress and the endurance limit …
-
Recovering Grain Boundary Inclination Parameters Through Oblique Double-Sectioning
… distributions from sets of incomplete pole-figures, is described along with a framework for implementation. The method directly measures grain boundary inclinations in a manner similar to serial sectioning while statistically sampling the microstructure comparably to stereological …
-
Investigations of the Brevard Fault zone and Tugaloo Terrane adjacent to the Grandfather Mountain Window, North Carolina
… crystallographic preferred orientation (CPO) pole figures support a high temperature, ~550-600 [degrees]C, deformation with a lower temperature overprint at~350 [degrees]C. The dominant mineral assemblage suggests deformation at greenschist facies. Any high temperature ductile deformation …
-
Assessment of grain refinement by microtexture analysis in thermomechanically processed Al 2519 alloy
… Microtexture information in the form of discrete pole figures indicated that the most highly superplastic material had completely recrystallized and deformed via grain boundary sliding, whereas material that did not display superplastic behavior deformed via slip. The second part of the study was …
-
Structure-property relationships for rolled polypropylene
… angle x-ray diffraction measurement of pole figures for uniaxially rolled polypropylene show a gradual rotation of the chain axes into the rolling direction. For cross rolled samples, pole figures show that the c-axis tend to align parallel to the surface of the sheet with no preferred …
-
Implications of limited slip in crystal plasticity
… for similar levels of hardening, and the pole figures that result from their deformation are compared to experimental pole figures. While there are other models that can capture the heterogeneity introduced by mesoscale deformation at the grain scale, this combined top-down, bottom-up …
-
Epitaxial electrodeposition of metal oxide films and superlattices which exhibit resistance switching
… of malic acid on Cu single crystals. X-ray pole figures in conjunction with stereographic projections are used to determine the absolute configuration of the films. X-ray crystal structures of copper(II) malate crystals are analyzed to understand the mechanisms of chiral …
-
Microstructural development of a nanocrystalline NiFe electrodeposit with banded structure
… no influence on the growth procedure. Inverse pole figures (IPFs) showed spread orientations for the grown grains after annealing at 300°C; which became more pronounced upon annealing and led to a sharp <111> texture parallel to the growth direction of the electrodeposition at 400°C. It was …
-
The formation and characterization of biaxially and uniaxially oriented poly (p-Phenylene Terephthalamide) films from liquid crystalline solutions
… techniques using orientation functions and pole figures that a relatively high level of biaxial orientation is achieved using the mandrel process. The above techniques were also used to characterize extruded and uniaxially drawn films. Indications of fairly high tensile strengths were found, …
-
Investigation of correlations between mechanical and microstructural properties of high purity polycrystalline niobium
… system (OIM). Texture was identified with pole figures (PF), orientation distribution function (ODF) and grain misorientation relationships. Stress-strain testing was done to identify ultimate tensile stress (UTS), elongation, 0.2% yield strength, and hardening rate. From tests on many …
-
A rotating annular die for control of biaxial orientation in melt processed thermotropic liquid crystalline cellulose derivatives
… wide angle x-ray diffraction techniques using pole figures in conjunction with orientation functions show that the molecular orientation can be controlled by the rotating annular die. Tubes and films were characterized at various die rotation speeds. White-Spruiell biaxial orientation factors …
-
Clarity and internal/external structure of blown polyethylene films
… using both birefringence and wide angle X-ray pole figures. Both L-LDPE and LDPE showed a typical a-axis orientation along the machine direction with the b-axes concentrated towards the normal direction.</p>
-
Microstructural evolution of sputtered phase segregated metal composite thin films
… composite systems through x-ray diffraction pole figures. Our thin film materials were codeposited at room temperature by magnetron sputtering. Each of these composite metal systems shows a different behavior as determined by the phase diagram of the composites. The fully miscible fcc-fcc …
-
Inference of stress and texture from the velocities of ultrasonic plate modes
… independent measurements based on X-ray pole figures. Refine- ments in the X-ray techniques are required before the accuracies of the predictions of W(,400) and W(,420) can be fully assessed; *DOE Report IS-T-1269. This work was performed under contract No. W-7405-Eng-82 with the U.S. …
-
Control of Microstructure and Texture in Nanocrystalline Transition -Metal Nitride Coatings by Ion Beam Assisted Deposition Method
… ion to atom ratio (J I/JM) = 2. Results of XRD pole figures showed that the films were highly textured. By the control of ion beam energy, JI/J M ratio, incident angle, and the deposition temperature, seven kinds of textures were observed. Four parameters, (1) surface energy, (2) strain energy, …
-
The Relationship Between Mechanical Properties, Preferred Orientation and Press Forming Behaviour of Copper and 70/30 Brass
… preferred orientation, which was assessed from pole figures, and to the planar variation in R value. The stretch formability of both materials was a maximum in the annealed condition, and there was little difference in performance between material temper rolled and temper annealed to the same …
-
Deformation and Its Effect on Recrystallization in Magnesium Alloy AZ31
… As for the texture evolution, analysis of the pole figures shows an evident strengthening of the basal texture during the cross-rolling.</p> <p>Specimens of Mg alloy AZ31 cold-rolled to equivalent strains of 0.10 and 0.30 were selected and annealed at 250<sup>o</sup>C. The progress of …
Page 1 of 3