Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"POLYURETHANE RESIN"”.

  1. Experimental Investigation of Strength Improvement of Fractured Rocks by Polyurethane Resin Grouting

    … curing times, and prolonged operation times. Resin grouting presents a promising potential solution due to resin's high penetrability into rock fractures and ability to improve rock strength. However, there remains uncertainty around quantifying the strength improvement resin can provide. For …

    adelaide Repository record for Experimental Investigation of Strength Improvement of Fractured Rocks by Polyurethane Resin Grouting (opens in a new tab)

  2. Understanding the Feasibility of Improving Interfacial Properties in Direct Ink Writing of Silicone-Polyurethane Resin Hybrid Material

    … both soft and hard phases by DIW of a silicone-polyurethane resin hybrid material. The interfacial adhesion was tested by conducting T-peel tests, showing improved peeling strength. INDEX WORDS: Silicone, Polyurethane resin, Direct ink writing, Peel test.

    gsu Repository record for Understanding the Feasibility of Improving Interfacial Properties in Direct Ink Writing of Silicone-Polyurethane Resin Hybrid Material (opens in a new tab)

  3. Projectile penetration into rock/elastomer composites.

    Composite materials cast from polyurethane resin, rack aggregates and sand have been examined to determine their resistance to penetration by 7.62mm ball and armour piercing high velocity projectiles. The effects of using different " polymer and rock types were investigated, and the resultant …

    whiterose Download PDF for Projectile penetration into rock/elastomer composites. (opens in a new tab)

  4. Mass VeneerX: Multi-Performance Optimization of Veneer-Based Mass Timber Panels

    … plywood lamella, or MPP remnant material using polyurethane resin adhesive in a structural press and is then milled down in a subtractive process to reach the optimal geometry for the given design and loading conditions. A parametric shaping model and lightweight finite element analysis model …

    oregon Repository record for Mass VeneerX: Multi-Performance Optimization of Veneer-Based Mass Timber Panels (opens in a new tab)

  5. STRENGTHENING OF DAMAGED STRUCTURAL MEMBERS WITH EXTERNAL FRP

    … glass, basalt, and hybrid FRPs with epoxy and polyurethane resin systems for rehabilitation of damaged structural components. Following evaluations were carried out in this research: (i) tension testing of FRP coupons, (ii) compression testing of concrete cylinders with and without damaged …

    wvu Repository record for STRENGTHENING OF DAMAGED STRUCTURAL MEMBERS WITH EXTERNAL FRP (opens in a new tab)

  6. Manufacturing of advanced continuous fiber reinforced composites for high temperature applications

    "New resin systems have enabled composites to be considered as attractive alternatives in structural applications that require material to be stronger, lighter and/or more resilient to environmental effects. The current work is on the development of processes to produce continuous fiber reinforced …

    must-thes Repository record for Manufacturing of advanced continuous fiber reinforced composites for high temperature applications (opens in a new tab)

  7. Fatigue Characteristics of Pressurized Artificial Muscles

    … pressurized artificial muscle in a cylindrical polyurethane resin matrix increased the life cycle of the actuator, and increasing the diameter of this resin matrix further increased the life cycle of the actuator.

    vt Repository record for Fatigue Characteristics of Pressurized Artificial Muscles (opens in a new tab)

  8. Development and Characterization of Environmentally Benign, Corrosion-Inhibiting, Dry Film Lubricant Coatings

    … An optimized combination of waterborne polyurethane resin, molybdenum disulfide, polytetrafluoroethylene, and coating additives produced a lubricant that met all requirements. Falex Pin and Vee Block testing for endurance life and load carrying capacity were extensively used to determine …

    texas-state Repository record for Development and Characterization of Environmentally Benign, Corrosion-Inhibiting, Dry Film Lubricant Coatings (opens in a new tab)

  9. Structural and Thermal Behaviour of Ferrite and Magnetic Composite Wireless Charging Pads for Electric Roadways

    … An SMC composed of crushed ferrite particles and polyurethane resin was developed through a multiphysics characterization of the composite over a range of ferrite volume fractions. The SMC with 74 vol% ferrite was chosen for use in an IPT pad based on its high strength and magnetic permeability, …

    auckland-ms Repository record for Structural and Thermal Behaviour of Ferrite and Magnetic Composite Wireless Charging Pads for Electric Roadways (opens in a new tab)

  10. Polyurethane Fiber Reinforced Polymer Strengthening of Shear Deficient Reinforced Concrete Beams

    … In this study, carbon FRP pre-impregnated with polyurethane resin is utilized in strengthening shear-deficient RC beams and compared to an epoxy resin. Fourteen small-scale (96 in span, 6 in width, and 12 in height) and five large-scale (132 in span, 12 in width, and 17 in height) flexural …

    ucf Repository record for Polyurethane Fiber Reinforced Polymer Strengthening of Shear Deficient Reinforced Concrete Beams (opens in a new tab)

  11. Effect of fiber architecture on properties of pultruded composites

    … and constituent materials including fiber and resin type, fiber architecture and Fiber Volume Fraction (FVF).;In this research, the structural behavior of pultruded composite plates having different fiber architecture (uni-, bi-, tri and quadri-) manufactured by the pultrusion process is …

    wvu Repository record for Effect of fiber architecture on properties of pultruded composites (opens in a new tab)

  12. Harnessing Photopolymerization for the Additive Manufacturing and Fabrication of Soft Materials and Machines

    … a dual-cure strategy is introduced to allow for polyurethanes, a class of elastomers underutilized in soft robotics applications, to be adapted for additive manufacturing via UV-DIW. Using a dual-cure resin composed of a photocurable acrylate and thermally-curable polyurethane network provides …

    umn Repository record for Harnessing Photopolymerization for the Additive Manufacturing and Fabrication of Soft Materials and Machines (opens in a new tab)

  13. Zařízení pro injektáž dvousložkových stavebních hmot

    Cílem této bakalářské práce je návrh zařízení pro injektáž dvousložkových stavebních hmot, které je možné používat při výškových pracích. Zařízení je navrženo jako přenosné s pohonem akumulátorovou vrtačkou. Úvodní část je věnována shrnutí současných produktů na trhu, následně jsou stanoveny …

    brno-tech Repository record for Zařízení pro injektáž dvousložkových stavebních hmot (opens in a new tab)

  14. Investigations on FRP-Concrete Bond

    … the concrete substrate. The viscosity of the resin hitherto not considered may be a critical parameter. In 1995, two full-scale concrete masonry walls were repaired using three horizontally aligned 20 in. (508 mm) wide uni-directional carbon fiber sheets using different commercially available …

    usf Repository record for Investigations on FRP-Concrete Bond (opens in a new tab)

  15. Reliéfy

    Tato magisterská praktická závěrečná práce je tvořena třemi reliéfními objekty seskládanými ze stehenních kostí. První objekt je pevná geodetická struktura aplikovaná na těleso ve tvaru koule. Následující dva jsou deformovány změkčením materiálu ze kterého jsou odlity. Druhý reliéfní objekt pracuje …

    brno-tech Repository record for Reliéfy (opens in a new tab)

  16. Propuesta de mejora de suelos licuables mediante inyección de resina expansible para cimentaciones de edificaciones de hasta tres pisos en la comunidad de Llanavilla, distrito de Villa El Salvador, modelado con GeoStudio

    … la mejora del suelo mediante la inyección de resina de poliuretano expansible como alternativa técnica para reducir el potencial de licuación en el diseño y cimentación de una edificación de tres pisos. La metodología consistió en la recopilación y análisis de estudios geotécnicos previos, la …

    upc-peru Repository record for Propuesta de mejora de suelos licuables mediante inyección de resina expansible para cimentaciones de edificaciones de hasta tres pisos en la comunidad de Llanavilla, distrito de Villa El Salvador, modelado con GeoStudio (opens in a new tab)

  17. Vývoj nového chemicky odolného nátěrového systému s obsahem druhotných surovin

    V rámci diplomové práce jsou navrženy a experimentálně prověřeny nové typy vysoce chemicky odolných nátěrových systémů, přednostně určených na betonový a kovový podklad. Jako mikroplniva jsou použité druhotné suroviny, včetně solidifikovaných nebezpečných odpadů. Vyvinutý nátěrový systém je řešen …

    brno-tech Repository record for Vývoj nového chemicky odolného nátěrového systému s obsahem druhotných surovin (opens in a new tab)

  18. Vývoj deskových materiálů na bázi dřeva s využitím procesu termické modifikace

    Tato diplomová práce se zabývá účinností polyuretanových a fenol-resorcín-formaldehydových lepidel při aplikaci v lepených spojích tepelně upravených plošných materiálů. V rámci rešeršní činnosti byla provedena analýza termické odolnosti komerčně používaných lepidel. Dále byly popsány změny …

    brno-tech Repository record for Vývoj deskových materiálů na bázi dřeva s využitím procesu termické modifikace (opens in a new tab)

  19. SPECIÁLNÍ POLYMERNÍ NÁTĚROVÉ A STĚRKOVÉ HMOTY S VYUŽITÍM DRUHOTNÝCH SUROVIN

    Práce se zabývá vývojem nových polymerních nátěrových a stěrkových hmot – konkrétně epoxidových, polyuretanových a vinylesterových s využitím nebezpečných odpadů ve formě plniv. Neustále se rozšiřují oblasti, které jsou určeny k jejich skládkování a náklady na uložení těchto odpadů jsou vysoké. …

    brno-tech Repository record for SPECIÁLNÍ POLYMERNÍ NÁTĚROVÉ A STĚRKOVÉ HMOTY S VYUŽITÍM DRUHOTNÝCH SUROVIN (opens in a new tab)

Page 1 of 2