Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 36 for “"PRINTING INKS"”.

  1. Rheology of printing inks and shortness

    Includes bibliographical references.

    colo-mines Repository record for Rheology of printing inks and shortness (opens in a new tab)

  2. NUMERICAL ANALYSIS OF 3D PRINTING INKS AND PARTICLE DISTRIBUTION INSIDE THE NOZZLE

    … simulation framework for non-Newtonian 3D printing inks using COMSOL Multiphysics. Moreover, another goal is to determine the particle distribution at the outlet of the nozzle with respect to different material parameters, processing conditions and the nozzle geometry. A cylindrical nozzle …

    jhu Repository record for NUMERICAL ANALYSIS OF 3D PRINTING INKS AND PARTICLE DISTRIBUTION INSIDE THE NOZZLE (opens in a new tab)

  3. A Study of the Lightfastness of High-Chroma Water-Based Flexographic Printing Inks

    The study of new material for package printing is critical because packaging is not only about visual aesthetics, but also function. Technologies such as High-chroma ink that aid expanded gamut printing can be especially useful in package printing. The thesis experiment examined the lightfastness …

    rit Repository record for A Study of the Lightfastness of High-Chroma Water-Based Flexographic Printing Inks (opens in a new tab)

  4. The use of Ektacolor Paper as a pre-press color proof

    … predictor equations for each of the four primary printing inks was derived relating additive exposures on Ektacolor to colorimetric solid ink densities. These relationship would not yield to simultaneous solution. Chromaticity coordinates of several sets of solid inks were matched on Ektacolor …

    rit Repository record for The use of Ektacolor Paper as a pre-press color proof (opens in a new tab)

  5. Preparation, characterisation and application of carbon black containing electrically conductive inks for textile printing

    … fabric structure, the obvious advantages of printing the desired conductive pattern are the simplicity of the process and the suitability for low volume production runs as well as high volume production runs. However, the generally inferior durability and poorer electrical performance of …

    whiterose Download PDF for Preparation, characterisation and application of carbon black containing electrically conductive inks for textile printing (opens in a new tab)

  6. Urban Energy

    … transfers, stencils with acrylic paints, and printing inks to convey a sense of urban energy. I use a range of bright and bold colors that reflect my vivid memories of this environment. I also want to balance geometric and orderly structure with the chaos of crowded streets. The layering …

    vcu Repository record for Urban Energy (opens in a new tab)

  7. A case study of the implementation of the environmental management systems standard BS7750: 1994 and the European community eco audit and management scheme, council regulation (EEC) No 1836/93, within the Wolstenholme International Ltd Darwen site

    … aluminium powder and the manufacture of metallic printing inks based on these powders. The bronze process includes a foundry for the alloying of copper based alloys and because of this is a prescribed process under the Environmental Protection (Prescribed Processes and Substances) Regulations 1991 …

    cent-lancashire Download PDF for A case study of the implementation of the environmental management systems standard BS7750: 1994 and the European community eco audit and management scheme, council regulation (EEC) No 1836/93, within the Wolstenholme International Ltd Darwen site (opens in a new tab)

  8. DESIGN OF A 3D PRINTED TENDON GRAFT SLEEVE FOR OSTEOINTEGRATION ENHANCEMENT

    … material for current non-biocompatible 3D printing inks. It can be concluded that the printed graft sleeve design is a reproducible alternative for current tissue augmentation devices and that the silk/SDS/Pluronic blend may be a prospective biocompatible bio ink for the printing of such a …

    nus Repository record for DESIGN OF A 3D PRINTED TENDON GRAFT SLEEVE FOR OSTEOINTEGRATION ENHANCEMENT (opens in a new tab) Download file for DESIGN OF A 3D PRINTED TENDON GRAFT SLEEVE FOR OSTEOINTEGRATION ENHANCEMENT (opens in a new tab)

  9. Peroxide Sensing Using Nitrogen-Doped and Platinum Nanoparticle-modified Screen-Printed Carbon Electrodes

    … which was then used in lab-formulated screen-printing inks to prepare N-SPCEs. N-SPCEs displayed good electrocatalytic activity, reproducibility and long term stability towards the electrochemical reduction of hydrogen peroxide. N-SPCEs exhibited a wide linear range (20 µM to 5.3 mM), …

    etsu Repository record for Peroxide Sensing Using Nitrogen-Doped and Platinum Nanoparticle-modified Screen-Printed Carbon Electrodes (opens in a new tab) Download PDF for Peroxide Sensing Using Nitrogen-Doped and Platinum Nanoparticle-modified Screen-Printed Carbon Electrodes (opens in a new tab)

  10. Additive Manufacturing Of Functional Constructs Under Process Uncertainty

    … tissue (Chapter 1). Associated with these new printing inks, however, is a drastic increase in the complexity of AM materials, and consequently, in the process uncertainty related to deposition of these materials. New applications enabled by functional printing capabilities, in particular in …

    cornell Repository record for Additive Manufacturing Of Functional Constructs Under Process Uncertainty (opens in a new tab)

  11. An Ultrastructural Study of the Effects of a Polychlorinated Biphenyl (Aroclor 1254) on the White Pelican Hepatocytes

    … dedusting agents, surface coatings, adhesives, printing inks, pesticide extenders and carbonless reproducing paper. Food and Drug Administration guidelines require that the maximum amount of PCB's should not exceed 0.20 parts per million (ppm) in milk (equivalent to 5.0 ppm in milk fat), …

    sdstate Repository record for An Ultrastructural Study of the Effects of a Polychlorinated Biphenyl (Aroclor 1254) on the White Pelican Hepatocytes (opens in a new tab)

  12. Gel Formation Mechanism and Application in Dysphagia: Based on Peach Matrix-Soy Protein Interactions

    … optimization of SPI-to-pectin ratios for 3D food printing. Firstly, three peach varieties, namely, Meirui (MR), Yangshan (YS), and Cons758 (Cons), were selected and compounded with SPI to develop dysphagia-friendly composite gels. Correlation analysis between peach pulp properties and gel …

    liege Repository record for Gel Formation Mechanism and Application in Dysphagia: Based on Peach Matrix-Soy Protein Interactions (opens in a new tab) Download PDF for Gel Formation Mechanism and Application in Dysphagia: Based on Peach Matrix-Soy Protein Interactions (opens in a new tab)

  13. Synthesis of Ta-doped Li7La3Zr2O12 for application in solid-state electrolyte

    … tests integrated synthesized LLZTO into 3D printing inks. After de binding and sintering, phase stability or crystallite size were unaffected, but mechanical fragility prevented reliable electrochemical testing. Overall, this study demonstrates both an effective spray drying route for …

    waterloo Repository record for Synthesis of Ta-doped Li7La3Zr2O12 for application in solid-state electrolyte (opens in a new tab)

  14. 3D printable fungi-based Chitin nanofiber/CNC hydrogels: implication for fabrication of functional cryogels

    … applications. However, their application in 3D printing remains in the early stages of research, as pure fungal chitin hydrogels exhibit poor printability that limits their use in additive manufacturing. In our study, we address this challenge by incorporating cellulose nanocrystals (CNCs) into …

    waterloo Repository record for 3D printable fungi-based Chitin nanofiber/CNC hydrogels: implication for fabrication of functional cryogels (opens in a new tab)

  15. Particle size reduction of phthalocyanine blue pigment.

    In a printing ink plant, phthalocyanine (Pc) aqueous slurries are produced by grinding the Pc pigment in water using a media mill. Mostly, dispersions of Pc in water are used in heat-set printing inks to make the color phthalo blue. Typically, Pc slurries are 40-50% solids and ground with steel …

    louisville Repository record for Particle size reduction of phthalocyanine blue pigment. (opens in a new tab)

  16. Additive Fabrication and Soft -Lithographic Patterning of Microelectronic Devices

    … Chapter 2 describes how microcontact printing of organic self-assembled monolayers (SAMs) can be used to induce selective chemical vapor deposition (CVD) of platinum and palladium metal films on silicon, which are used extensively in the microelectronics industry to make metal silicide …

    uiuc Repository record for Additive Fabrication and Soft -Lithographic Patterning of Microelectronic Devices (opens in a new tab)

  17. Biochar as a Substitute for Carbon Black in Lithographic Ink Production

    … carbon negative material, in commercial inks will be presented. The overall project goal was to produce an optimal feedstock for biochar through impurity removal techniques. Biochar is most commonly used in soil applications or water remediation, due to its highly porous nature, leading …

    rit Repository record for Biochar as a Substitute for Carbon Black in Lithographic Ink Production (opens in a new tab)

  18. Preparation and characterisation of inks for let printing onto textile materials

    … of using thermal drop-on-demand ink jet printing to print pigmented ink systems onto textile materials was investigated. Preliminary studies showed that a novel binder system, Synthappret BAP (traditionally used as a shrink resist treatment for wool), could be successfully incorporated …

    whiterose Download PDF for Preparation and characterisation of inks for let printing onto textile materials (opens in a new tab)

  19. Microcharacterisation of Halogenated Copper Phthalocyanines Using Transmission Electron Microscopy

    … form to colour paints, plastics, dyes and printing inks. Their colouring properties are strongly dependent on the size, shape and chemical composition of the individual pigment particles which have dimensions of typically 50nm. Batches of pigments, produced using nominally the same …

    glasgow Download PDF for Microcharacterisation of Halogenated Copper Phthalocyanines Using Transmission Electron Microscopy (opens in a new tab)

Page 1 of 2