Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 556 for “"PTFE"”.
-
Study of combustion performance of Al/PTFE B/PTFE and B/Al/PTFE composites
… materials such as polytetrafluoroethylene (PTFE) that mitigate through reaction the formation of metal oxide features on metal particles can reduce ignition delay and further expedite metal particle combustion energy release. Ball milling is of particular interest in fabrication of …
-
Equation of state for polytetrafluoroethylene (PTFE) and mixtures with PTFE
… of specific mixtures of nickel, aluminum with PTFE or Teflon as the binder. It is to be noted that the equations of state forms only a part of the complete constitutive relationships. This thesis presents solutions to the following problems: (1) Determination of the thermodynamically complete …
-
Avaliação tribológica dos polímeros NBR, PTFE e PTFE gravitado em contato com aço AISI 52100
… hardness 73 ± 5 Sh A, polytetrafluoroethylene (PTFE), hardness 60 ± 4 HRE and PTFE with graphite, 68 ± 6 HRE. The testings were performed on a sliding tribometer conceived to explore the tribological performance of stationary polymer plane coupons submitted to rotational cylinder contact surface …
-
Polytetrafluoroethylene (PTFE) vs. PTFE-Free Coatings on Paper Label: Analysis of Label Mechanical and Performance Properties
… characteristics. Polytetrafluoroethylene (PTFE) is one of the common additives added to the WB coatings to achieve heat resistance and rub resistance properties for the final product. PTFE is a synthetic fluoropolymer of tetrafluoroethylene, and is a category of Polyfluorinated Substances …
-
3D Printing PTFE with Direct Ink Writing
Polytetrafluoroethylene (PTFE) is a unique fluoropolymer comprising of only fluorine and carbon atoms with various desirable properties such as non-stick, chemical inertness, thermal stability and electrical insulation. Molding and sintering techniques following by pressurized preforming are …
-
Tribology of PTFE/PEEK Composite at Elevated Temperature
… lubricants, such as polytetrafluoroethylene (PTFE), into the polymer. In view of the wide use of PTFE/PEEK composite for tribological applications, predictive models and theories are needed to better understand friction and wear mechanisms of the composite and accelerate development and …
-
Recovery of valuable products from polytetrafluoroethylene (PTFE) waste
The disposal of PTFE waste presents a global problem from both an ecological and economical perspective. This study was performed to address this problem as well as to understand the mechanism according to which PTFE is depolymerised to form the different products, namely C2F4, C2F6, C3F6, C3F8 and …
-
PDA/PTFE Solid Lubricant Coating for 60NiTi Applications
… be applied to 60NiTi. A polytetrafluoroethylene (PTFE)-based solid lubricant coating that uses a polydopamine (PDA) adhesive underlayer was developed and evaluated for use on 60NiTi. PDA/PTFE coating was evaluated on 60NiTi substrate by linear-reciprocating wear tests against a Si3N4 ball. The …
-
Flame propagation of Al/PTFE mechanically activated composites
… of MA aluminum and polytetrafluoroethylene (PTFE) while varying as-milled particle size, stoichiometry, particle bed density, and confinement to better understand combustion propagation. Propagation rates of MA Al/PTFE are four orders of magnitude slower than similar physically mixed …
-
Microestruturação de politetrafluoretileno (PTFE) por feixes de prótons
… de estruturação de politetrafluoretileno (PTFE), através do microfeixe iônico, para possível desenvolvimento de biossensores moleculares, membranas estruturadas e dispositivos óptico-eletrônicos. O procedimento para a fabricação de estruturas com microfeixe de íons consiste, basicamente, na …
-
Modeling and flow simulation of polytetrafluoroethylene (PTFE) paste extrusion
… the paste extrusion of polytetrafluoroethylene (PTFE) that take into account the continuous change of the microstructure during flow, essentially through fibril formation. The mechanism of fibrillation is captured through a microscopic model for a structural parameter,ξ , that is the percentage …
-
Wetability control of ptfe surfaces with femtosecond laser pulses /
… different laser fabrication parameters impact on PTFE surface wettability control. To achieve this, the surfaces of PTFE have been modified with two different laser radiation wavelengths by altering laser micromachining parameters, such as, pulses overlap (scanning velocity), number of rescans and …
-
Development and analysis of aluminum-PTFE reactive composite material
… even explosives. A composite with composition Al-PTFE (90-10 wt. %) is prepared through Cryomilling and is shown to be a better method of preparation as compared to room temperature milling. The prepared materials are studied to identify best conditions. The analysis methods include thermal …
-
Role of fibrillation on Poisson's ratio of expanded polytetrafluoroethylene (PTFE)
The polytetrafluoroethylene (PTFE) paste extrusion was studied to elucidate the role of structure formation (fibrillation) on the Poisson’s ratio of final products such as stents and other implants. In particular two types of PTFE have been studied in capillary extrusion using dies having different …
-
Estudo de microestruturas fabricadas em PTFE utilizando a técnica STIM
… material. Para esse estudo, folhas e chapas de PTFE (Politetrafluoretileno) foram utilizadas como modelo. O PTFE foi microestruturado através da técnica PBW (Varredura com Feixes de Prótons), utilizando prótons de 2,2 MeV, com feixe de aproximadamente 2 µm2 e fluência de 1x1015 íons.cm-2 na …
-
Wear Resistant Polydopamine/PTFE Nanoparticle Composite Coating for Dry Lubrication Applications
… primer on the tribological performance of thin PTFE films. The principal objective of this investigation was to reduce wear in PTFE films, an issue which precludes the use of PTFE films in tribological applications requiring high durability. The friction and wear of the composite films were …
Page 1 of 28